Deprecated Interface

Deprecated Interface — Deprecated types and methods.

Functions

gboolean qmi_device_close ()
void qmi_device_command ()
QmiMessage * qmi_device_command_finish ()
void qmi_utils_read_guint8_from_buffer ()
void qmi_utils_read_gint8_from_buffer ()
void qmi_utils_read_guint16_from_buffer ()
void qmi_utils_read_gint16_from_buffer ()
void qmi_utils_read_guint32_from_buffer ()
void qmi_utils_read_gint32_from_buffer ()
void qmi_utils_read_guint64_from_buffer ()
void qmi_utils_read_gint64_from_buffer ()
void qmi_utils_read_sized_guint_from_buffer ()
void qmi_utils_read_gfloat_from_buffer ()
void qmi_utils_read_string_from_buffer ()
void qmi_utils_read_fixed_size_string_from_buffer ()
void qmi_utils_write_guint8_to_buffer ()
void qmi_utils_write_gint8_to_buffer ()
void qmi_utils_write_guint16_to_buffer ()
void qmi_utils_write_gint16_to_buffer ()
void qmi_utils_write_guint32_to_buffer ()
void qmi_utils_write_gint32_to_buffer ()
void qmi_utils_write_guint64_to_buffer ()
void qmi_utils_write_gint64_to_buffer ()
void qmi_utils_write_sized_guint_to_buffer ()
void qmi_utils_write_string_to_buffer ()
void qmi_utils_write_fixed_size_string_to_buffer ()
gboolean qmi_message_get_version_introduced ()
gboolean qmi_message_get_version_introduced_full ()
gchar * qmi_message_get_printable ()
gboolean qmi_message_dms_set_service_programming_code_input_get_new ()
gboolean qmi_message_dms_set_service_programming_code_input_set_new ()
gboolean qmi_message_dms_set_service_programming_code_input_get_current ()
gboolean qmi_message_dms_set_service_programming_code_input_set_current ()
gboolean qmi_message_tlv_read_gfloat ()
gboolean qmi_message_uim_change_pin_input_get_session_information ()
gboolean qmi_message_uim_change_pin_input_set_session_information ()
gboolean qmi_message_uim_get_file_attributes_input_get_session_information ()
gboolean qmi_message_uim_get_file_attributes_input_set_session_information ()
gboolean qmi_message_uim_read_record_input_get_session_information ()
gboolean qmi_message_uim_read_record_input_set_session_information ()
gboolean qmi_message_uim_read_transparent_input_get_session_information ()
gboolean qmi_message_uim_read_transparent_input_set_session_information ()
gboolean qmi_message_uim_set_pin_protection_input_get_session_information ()
gboolean qmi_message_uim_set_pin_protection_input_set_session_information ()
gboolean qmi_message_uim_unblock_pin_input_get_session_information ()
gboolean qmi_message_uim_unblock_pin_input_set_session_information ()
gboolean qmi_message_uim_verify_pin_input_get_session_information ()
gboolean qmi_message_uim_verify_pin_input_set_session_information ()
gboolean qmi_message_nas_get_operator_name_output_get_operator_nitz_information ()
gboolean qmi_indication_nas_operator_name_output_get_operator_nitz_information ()
gboolean qmi_message_nas_get_home_network_output_get_home_network_3gpp2 ()
gboolean qmi_message_nas_get_cell_location_info_output_get_geran_info ()
gboolean qmi_message_nas_get_cell_location_info_output_get_umts_info ()
gboolean qmi_message_nas_get_cell_location_info_output_get_intrafrequency_lte_info ()
gboolean qmi_message_nas_get_system_info_output_get_gsm_system_info ()
gboolean qmi_message_nas_get_system_info_output_get_lte_system_info ()
gboolean qmi_message_nas_get_system_info_output_get_td_scdma_system_info ()
gboolean qmi_message_nas_get_system_info_output_get_wcdma_system_info ()
gboolean qmi_indication_nas_system_info_output_get_gsm_system_info ()
gboolean qmi_indication_nas_system_info_output_get_lte_system_info ()
gboolean qmi_indication_nas_system_info_output_get_td_scma_system_info ()
gboolean qmi_indication_nas_system_info_output_get_wcdma_system_info ()
gboolean qmi_message_nas_swi_get_status_output_get_common_info ()
gboolean qmi_message_nas_set_system_selection_preference_input_get_mnc_pds_digit_include_status ()
gboolean qmi_indication_uim_slot_status_output_get_slot_eid_information ()
gboolean qmi_message_uim_get_slot_status_output_get_slot_eid_information ()
const gchar * qmi_dms_dell_firmware_version_type_get_string ()
QmiDeprecatedMessageDmsDellGetFirmwareVersionInput * qmi_message_dms_dell_get_firmware_version_input_new ()
QmiDeprecatedMessageDmsDellGetFirmwareVersionInput * qmi_message_dms_dell_get_firmware_version_input_ref ()
gboolean qmi_message_dms_dell_get_firmware_version_input_set_version_type ()
gboolean qmi_message_dms_dell_get_firmware_version_input_get_version_type ()
void qmi_message_dms_dell_get_firmware_version_input_unref ()
QmiDeprecatedMessageDmsDellGetFirmwareVersionOutput * qmi_message_dms_dell_get_firmware_version_output_ref ()
void qmi_message_dms_dell_get_firmware_version_output_unref ()
gboolean qmi_message_dms_dell_get_firmware_version_output_get_result ()
gboolean qmi_message_dms_dell_get_firmware_version_output_get_version ()
void qmi_client_dms_dell_get_firmware_version ()
QmiDeprecatedMessageDmsDellGetFirmwareVersionOutput * qmi_client_dms_dell_get_firmware_version_finish ()
const gchar * qmi_dms_dell_device_mode_get_string ()
QmiDeprecatedMessageDmsDellChangeDeviceModeInput * qmi_message_dms_dell_change_device_mode_input_new ()
QmiDeprecatedMessageDmsDellChangeDeviceModeInput * qmi_message_dms_dell_change_device_mode_input_ref ()
gboolean qmi_message_dms_dell_change_device_mode_input_set_mode ()
gboolean qmi_message_dms_dell_change_device_mode_input_get_mode ()
void qmi_message_dms_dell_change_device_mode_input_unref ()
QmiDeprecatedMessageDmsDellChangeDeviceModeOutput * qmi_message_dms_dell_change_device_mode_output_ref ()
void qmi_message_dms_dell_change_device_mode_output_unref ()
gboolean qmi_message_dms_dell_change_device_mode_output_get_result ()
void qmi_client_dms_dell_change_device_mode ()
QmiDeprecatedMessageDmsDellChangeDeviceModeOutput * qmi_client_dms_dell_change_device_mode_finish ()
void qmi_client_wds_get_default_profile_num ()
QmiDeprecatedMessageWdsGetDefaultProfileNumOutput * qmi_client_wds_get_default_profile_num_finish ()
QmiDeprecatedMessageWdsGetDefaultProfileNumInput * qmi_message_wds_get_default_profile_num_input_new ()
QmiDeprecatedMessageWdsGetDefaultProfileNumInput * qmi_message_wds_get_default_profile_num_input_ref ()
gboolean qmi_message_wds_get_default_profile_num_input_get_profile_type ()
gboolean qmi_message_wds_get_default_profile_num_input_set_profile_type ()
void qmi_message_wds_get_default_profile_num_input_unref ()
QmiDeprecatedMessageWdsGetDefaultProfileNumOutput * qmi_message_wds_get_default_profile_num_output_ref ()
void qmi_message_wds_get_default_profile_num_output_unref ()
gboolean qmi_message_wds_get_default_profile_num_output_get_default_profile_number ()
gboolean qmi_message_wds_get_default_profile_num_output_get_extended_error_code ()
gboolean qmi_message_wds_get_default_profile_num_output_get_result ()
void qmi_client_wds_set_default_profile_num ()
QmiDeprecatedMessageWdsSetDefaultProfileNumOutput * qmi_client_wds_set_default_profile_num_finish ()
QmiDeprecatedMessageWdsSetDefaultProfileNumInput * qmi_message_wds_set_default_profile_num_input_new ()
QmiDeprecatedMessageWdsSetDefaultProfileNumInput * qmi_message_wds_set_default_profile_num_input_ref ()
gboolean qmi_message_wds_set_default_profile_num_input_get_profile_identifier ()
gboolean qmi_message_wds_set_default_profile_num_input_set_profile_identifier ()
void qmi_message_wds_set_default_profile_num_input_unref ()
gboolean qmi_message_wds_set_default_profile_num_output_get_extended_error_code ()
gboolean qmi_message_wds_set_default_profile_num_output_get_result ()
QmiDeprecatedMessageWdsSetDefaultProfileNumOutput * qmi_message_wds_set_default_profile_num_output_ref ()
void qmi_message_wds_set_default_profile_num_output_unref ()
gboolean qmi_message_pdc_config_change_input_get_type_with_id ()
gboolean qmi_message_pdc_config_change_input_set_type_with_id ()
gboolean qmi_message_pdc_config_change_output_get_type_with_id ()
gboolean qmi_message_pdc_set_selected_config_input_get_type_with_id ()
gboolean qmi_message_pdc_set_selected_config_input_set_type_with_id ()
gboolean qmi_message_pdc_get_config_info_input_get_type_with_id ()
gboolean qmi_message_pdc_get_config_info_input_set_type_with_id ()
gboolean qmi_message_dms_delete_stored_image_input_get_image ()
gboolean qmi_message_dms_delete_stored_image_input_set_image ()
gboolean qmi_message_dms_get_stored_image_info_input_get_image ()
gboolean qmi_message_dms_get_stored_image_info_input_set_image ()
gboolean qmi_indication_loc_position_report_output_get_dilution_of_precision ()
gboolean qmi_indication_loc_position_report_output_get_gps_time ()
gboolean qmi_message_uim_get_configuration_output_get_personalization_status_other_slots ()
gchar * qmi_wds_get_current_settings_requested_settings_build_string_from_mask ()

Types and Values

  QmiMessageNasGetCellLocationInfoOutputGeranInfoCellElement
typedef QmiMessageNasGetCellLocationInfoOutputUmtsInfoCellElement
typedef QmiMessageNasGetCellLocationInfoOutputUmtsInfoNeighboringGeranElement
typedef QmiMessageNasGetCellLocationInfoOutputIntrafrequencyLteInfoCellElement
#define QMI_NAS_SIM_REJECT_STATE_SIM_VAILABLE
#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_VACANT
#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_TRANSLATION_FAILURE
#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_RESOURCE_SHORTAGE
#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_FAILURE
#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_INVALID_TELESERVICE_ID
#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_OTHER
#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NO_PAGE_RESPONSE
#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_BUSY
#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NO_ACK
#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_RESOURCE_SHORTAGE
#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_SMS_DELIVERY_POSTPONED
#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_OUT_OF_SERVICE
#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NOT_AT_ADDRESS
#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_OTHER
#define QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_RESOURCE_SHORTAGE
#define QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_INCOMPATIBILITY
#define QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_OTHER
#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_ENCODING
#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_ORIGIN_DENIED
#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_DESTINATION_DENIED
#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SUPPLEMENTARY_SERVICE_NOT_SUPPORTED
#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_NOT_SUPPORTED
#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_MISSING_EXPECTED_PARAMETER
#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_MISSING_MANDATORY_PARAMETER
#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_UNRECOGNIZED_PARAMETER_VALUE
#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_UNEXPECTED_PARAMETER_VALUE
#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_USER_DATA_SIZE_ERROR
#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_OTHER
#define QMI_PROTOCOL_ERROR_QOS_UNAVAILABLE
#define QMI_WDS_VERBOSE_CALL_END_REASON_CM_CONFIGURATION_FAILED
typedef QmiDmsDellFirmwareVersionType
typedef QmiMessageDmsDellGetFirmwareVersionInput
typedef QmiMessageDmsDellGetFirmwareVersionOutput
typedef QmiDmsDellDeviceMode
typedef QmiMessageDmsDellChangeDeviceModeInput
typedef QmiMessageDmsDellChangeDeviceModeOutput
typedef QmiMessageWdsGetDefaultProfileNumInput
typedef QmiMessageWdsGetDefaultProfileNumOutput
typedef QmiMessageWdsSetDefaultProfileNumInput
typedef QmiMessageWdsSetDefaultProfileNumOutput
typedef QmiConfigTypeAndId
typedef QmiMessageDmsDeleteStoredImageInputImage
typedef QmiMessageDmsGetStoredImageInfoInputImage
typedef QmiIndicationLocPositionReportOutputDilutionOfPrecision
typedef QmiIndicationLocPositionReportOutputGpsTime
  QmiMessageUimGetConfigurationOutputPersonalizationStatusOtherSlotsSlotsElement
typedef QmiWdsGetCurrentSettingsRequestedSettings

Description

These types and methods are flagged as deprecated and therefore shouldn't be used in newly written code. They are provided to avoid innecessary API/ABI breaks, for compatibility purposes only.

Functions

qmi_device_close ()

gboolean
qmi_device_close (QmiDevice *self,
                  GError **error);

qmi_device_close has been deprecated since version 1.18 and should not be used in newly-written code.

Use qmi_device_close_async() instead.

Synchronously closes a QmiDevice, preventing any further I/O.

If this device was opened with QMI_DEVICE_OPEN_FLAGS_MBIM , this operation will not wait for the response of the underlying MBIM close sequence.

Closing a QmiDevice multiple times will not return an error.

Parameters

self

a QmiDevice

 

error

Return location for error or NULL.

 

Returns

TRUE if successful, FALSE if error is set.

Since: 1.0


qmi_device_command ()

void
qmi_device_command (QmiDevice *self,
                    QmiMessage *message,
                    guint timeout,
                    GCancellable *cancellable,
                    GAsyncReadyCallback callback,
                    gpointer user_data);

qmi_device_command has been deprecated since version 1.18 and should not be used in newly-written code.

Use qmi_device_command_full() instead.

Asynchronously sends a generic QmiMessage to the device with no context.

If the operation is cancelled via cancellable , a QMI_PROTOCOL_ERROR_ABORTED error will be returned always. If the QMI method may be aborted, there is no guarantee that the operation is truly aborted before the error is returned so it may really happen that the operation really succeeded and the method would still return QMI_PROTOCOL_ERROR_ABORTED. In order to use abortable methods and make sure the response is the correct one, use qmi_device_command_abortable().

When the operation is finished callback will be called. You can then call qmi_device_command_finish() to get the result of the operation.

Parameters

self

a QmiDevice.

 

message

the message to send.

 

timeout

maximum time, in seconds, to wait for the response.

 

cancellable

a GCancellable, or NULL.

 

callback

a GAsyncReadyCallback to call when the operation is finished.

 

user_data

the data to pass to callback function.

 

Since: 1.0


qmi_device_command_finish ()

QmiMessage *
qmi_device_command_finish (QmiDevice *self,
                           GAsyncResult *res,
                           GError **error);

qmi_device_command_finish has been deprecated since version 1.18. and should not be used in newly-written code.

Use qmi_device_command_full_finish() instead.

Finishes an operation started with qmi_device_command().

Parameters

self

a QmiDevice.

 

res

a GAsyncResult.

 

error

Return location for error or NULL.

 

Returns

a QmiMessage response, or NULL if error is set. The returned value should be freed with qmi_message_unref().

[transfer full]

Since: 1.0


qmi_utils_read_guint8_from_buffer ()

void
qmi_utils_read_guint8_from_buffer (const guint8 **buffer,
                                   guint16 *buffer_size,
                                   guint8 *out);

qmi_utils_read_guint8_from_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_read_guint8() instead.

Reads an unsigned byte from the buffer.

The user needs to make sure that at least 1 byte is available in the buffer.

Also note that both buffer and buffer_size get updated after the 1 byte read.

Parameters

buffer

a buffer with raw binary data.

 

buffer_size

size of buffer .

 

out

return location for the read variable.

 

Since: 1.0


qmi_utils_read_gint8_from_buffer ()

void
qmi_utils_read_gint8_from_buffer (const guint8 **buffer,
                                  guint16 *buffer_size,
                                  gint8 *out);

qmi_utils_read_gint8_from_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_read_gint8() instead.

Reads a signed byte from the buffer.

The user needs to make sure that at least 1 byte is available in the buffer.

Also note that both buffer and buffer_size get updated after the 1 byte read.

Parameters

buffer

a buffer with raw binary data.

 

buffer_size

size of buffer .

 

out

return location for the read variable.

 

Since: 1.0


qmi_utils_read_guint16_from_buffer ()

void
qmi_utils_read_guint16_from_buffer (const guint8 **buffer,
                                    guint16 *buffer_size,
                                    QmiEndian endian,
                                    guint16 *out);

qmi_utils_read_guint16_from_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_read_guint16() instead.

Reads an unsigned 16-bit integer from the buffer. The number in the buffer is expected to be given in the byte order specificed by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least 2 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 2 bytes read.

Parameters

buffer

a buffer with raw binary data.

 

buffer_size

size of buffer .

 

endian

endianness of firmware value; swapped to host byte order if necessary

 

out

return location for the read variable.

 

Since: 1.0


qmi_utils_read_gint16_from_buffer ()

void
qmi_utils_read_gint16_from_buffer (const guint8 **buffer,
                                   guint16 *buffer_size,
                                   QmiEndian endian,
                                   gint16 *out);

qmi_utils_read_gint16_from_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_read_gint16() instead.

Reads a signed 16-bit integer from the buffer. The number in the buffer is expected to be given in the byte order specified by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least 2 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 2 bytes read.

Parameters

buffer

a buffer with raw binary data.

 

buffer_size

size of buffer .

 

endian

endianness of firmware value; swapped to host byte order if necessary

 

out

return location for the read variable.

 

Since: 1.0


qmi_utils_read_guint32_from_buffer ()

void
qmi_utils_read_guint32_from_buffer (const guint8 **buffer,
                                    guint16 *buffer_size,
                                    QmiEndian endian,
                                    guint32 *out);

qmi_utils_read_guint32_from_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_read_guint32() instead.

Reads an unsigned 32-bit integer from the buffer. The number in the buffer is expected to be given in the byte order specified by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least 4 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 4 bytes read.

Parameters

buffer

a buffer with raw binary data.

 

buffer_size

size of buffer .

 

endian

endianness of firmware value; swapped to host byte order if necessary

 

out

return location for the read variable.

 

Since: 1.0


qmi_utils_read_gint32_from_buffer ()

void
qmi_utils_read_gint32_from_buffer (const guint8 **buffer,
                                   guint16 *buffer_size,
                                   QmiEndian endian,
                                   gint32 *out);

qmi_utils_read_gint32_from_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_read_gint32() instead.

Reads a signed 32-bit integer from the buffer. The number in the buffer is expected to be given in the byte order specified by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least 4 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 4 bytes read.

Parameters

buffer

a buffer with raw binary data.

 

buffer_size

size of buffer .

 

endian

endianness of firmware value; swapped to host byte order if necessary

 

out

return location for the read variable.

 

Since: 1.0


qmi_utils_read_guint64_from_buffer ()

void
qmi_utils_read_guint64_from_buffer (const guint8 **buffer,
                                    guint16 *buffer_size,
                                    QmiEndian endian,
                                    guint64 *out);

qmi_utils_read_guint64_from_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_read_guint64() instead.

Reads an unsigned 64-bit integer from the buffer. The number in the buffer is expected to be given in the byte order specified by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least 8 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 8 bytes read.

Parameters

buffer

a buffer with raw binary data.

 

buffer_size

size of buffer .

 

endian

endianness of firmware value; swapped to host byte order if necessary

 

out

return location for the read variable.

 

Since: 1.0


qmi_utils_read_gint64_from_buffer ()

void
qmi_utils_read_gint64_from_buffer (const guint8 **buffer,
                                   guint16 *buffer_size,
                                   QmiEndian endian,
                                   gint64 *out);

qmi_utils_read_gint64_from_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_read_gint64() instead.

Reads a signed 64-bit integer from the buffer. The number in the buffer is expected to be given in the byte order specified by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least 8 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 8 bytes read.

Parameters

buffer

a buffer with raw binary data.

 

buffer_size

size of buffer .

 

endian

endianness of firmware value; swapped to host byte order if necessary

 

out

return location for the read variable.

 

Since: 1.0


qmi_utils_read_sized_guint_from_buffer ()

void
qmi_utils_read_sized_guint_from_buffer
                               (const guint8 **buffer,
                                guint16 *buffer_size,
                                guint n_bytes,
                                QmiEndian endian,
                                guint64 *out);

qmi_utils_read_sized_guint_from_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_read_sized_guint() instead.

Reads a n_bytes -sized unsigned integer from the buffer. The number in the buffer is expected to be given in the byte order specified by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least n_bytes bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the n_bytes bytes read.

Parameters

buffer

a buffer with raw binary data.

 

buffer_size

size of buffer .

 

n_bytes

number of bytes to read.

 

endian

endianness of firmware value; swapped to host byte order if necessary

 

out

return location for the read variable.

 

Since: 1.0


qmi_utils_read_gfloat_from_buffer ()

void
qmi_utils_read_gfloat_from_buffer (const guint8 **buffer,
                                   guint16 *buffer_size,
                                   gfloat *out);

qmi_utils_read_gfloat_from_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_read_gfloat() instead.

Reads a 32-bit floating-point number from the buffer.

The user needs to make sure that at least 4 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 4 bytes read.

Parameters

buffer

a buffer with raw binary data.

 

buffer_size

size of buffer .

 

out

return location for the read variable.

 

Since: 1.10


qmi_utils_read_string_from_buffer ()

void
qmi_utils_read_string_from_buffer (const guint8 **buffer,
                                   guint16 *buffer_size,
                                   guint8 length_prefix_size,
                                   guint16 max_size,
                                   gchar **out);

qmi_utils_read_string_from_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_read_string() instead.

Reads a string from the buffer.

If length_prefix_size is greater than 0, only the amount of bytes given there will be read. Otherwise, up to buffer_size bytes will be read.

Also note that both buffer and buffer_size get updated after the write.

Parameters

buffer

a buffer with raw binary data.

 

buffer_size

size of buffer .

 

length_prefix_size

size of the length prefix integer in bits.

 

max_size

maximum number of bytes to read, or 0 to read all available bytes.

 

out

return location for the read string. The returned value should be freed with g_free().

 

Since: 1.0


qmi_utils_read_fixed_size_string_from_buffer ()

void
qmi_utils_read_fixed_size_string_from_buffer
                               (const guint8 **buffer,
                                guint16 *buffer_size,
                                guint16 fixed_size,
                                gchar *out);

qmi_utils_read_fixed_size_string_from_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_read_fixed_size_string() instead.

Reads a fixed_size -sized string from the buffer into the out buffer.

Also note that both buffer and buffer_size get updated after the fixed_size bytes read.

Parameters

buffer

a buffer with raw binary data.

 

buffer_size

size of buffer .

 

fixed_size

number of bytes to read.

 

out

buffer preallocated by the client, with at least fixed_size bytes.

 

Since: 1.0


qmi_utils_write_guint8_to_buffer ()

void
qmi_utils_write_guint8_to_buffer (guint8 **buffer,
                                  guint16 *buffer_size,
                                  guint8 *in);

qmi_utils_write_guint8_to_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_write_guint8() instead.

Writes an unsigned byte into the buffer.

The user needs to make sure that the buffer is at least 1 byte long.

Also note that both buffer and buffer_size get updated after the 1 byte write.

Parameters

buffer

a buffer.

 

buffer_size

size of buffer .

 

in

location of the variable to be written.

 

Since: 1.0


qmi_utils_write_gint8_to_buffer ()

void
qmi_utils_write_gint8_to_buffer (guint8 **buffer,
                                 guint16 *buffer_size,
                                 gint8 *in);

qmi_utils_write_gint8_to_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_write_gint8() instead.

Writes a signed byte into the buffer.

The user needs to make sure that the buffer is at least 1 byte long.

Also note that both buffer and buffer_size get updated after the 1 byte write.

Parameters

buffer

a buffer.

 

buffer_size

size of buffer .

 

in

location of the variable to be written.

 

Since: 1.0


qmi_utils_write_guint16_to_buffer ()

void
qmi_utils_write_guint16_to_buffer (guint8 **buffer,
                                   guint16 *buffer_size,
                                   QmiEndian endian,
                                   guint16 *in);

qmi_utils_write_guint16_to_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_write_guint16() instead.

Writes an unsigned 16-bit integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least 2 bytes long.

Also note that both buffer and buffer_size get updated after the 2 bytes write.

Parameters

buffer

a buffer.

 

buffer_size

size of buffer .

 

endian

endianness of firmware value; swapped from host byte order if necessary

 

in

location of the variable to be written.

 

Since: 1.0


qmi_utils_write_gint16_to_buffer ()

void
qmi_utils_write_gint16_to_buffer (guint8 **buffer,
                                  guint16 *buffer_size,
                                  QmiEndian endian,
                                  gint16 *in);

qmi_utils_write_gint16_to_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_write_gint16() instead.

Writes a signed 16-bit integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least 2 bytes long.

Also note that both buffer and buffer_size get updated after the 2 bytes write.

Parameters

buffer

a buffer.

 

buffer_size

size of buffer .

 

endian

endianness of firmware value; swapped from host byte order if necessary

 

in

location of the variable to be written.

 

Since: 1.0


qmi_utils_write_guint32_to_buffer ()

void
qmi_utils_write_guint32_to_buffer (guint8 **buffer,
                                   guint16 *buffer_size,
                                   QmiEndian endian,
                                   guint32 *in);

qmi_utils_write_guint32_to_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_write_guint32() instead.

Writes an unsigned 32-bit integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least 4 bytes long.

Also note that both buffer and buffer_size get updated after the 4 bytes write.

Parameters

buffer

a buffer.

 

buffer_size

size of buffer .

 

endian

endianness of firmware value; swapped from host byte order if necessary

 

in

location of the variable to be written.

 

Since: 1.0


qmi_utils_write_gint32_to_buffer ()

void
qmi_utils_write_gint32_to_buffer (guint8 **buffer,
                                  guint16 *buffer_size,
                                  QmiEndian endian,
                                  gint32 *in);

qmi_utils_write_gint32_to_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_write_gint32() instead.

Writes a signed 32-bit integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least 4 bytes long.

Also note that both buffer and buffer_size get updated after the 4 bytes write.

Parameters

buffer

a buffer.

 

buffer_size

size of buffer .

 

endian

endianness of firmware value; swapped from host byte order if necessary

 

in

location of the variable to be written.

 

Since: 1.0


qmi_utils_write_guint64_to_buffer ()

void
qmi_utils_write_guint64_to_buffer (guint8 **buffer,
                                   guint16 *buffer_size,
                                   QmiEndian endian,
                                   guint64 *in);

qmi_utils_write_guint64_to_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_write_guint64() instead.

Writes an unsigned 64-bit integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least 8 bytes long.

Also note that both buffer and buffer_size get updated after the 8 bytes write.

Parameters

buffer

a buffer.

 

buffer_size

size of buffer .

 

endian

endianness of firmware value; swapped from host byte order if necessary

 

in

location of the variable to be written.

 

Since: 1.0


qmi_utils_write_gint64_to_buffer ()

void
qmi_utils_write_gint64_to_buffer (guint8 **buffer,
                                  guint16 *buffer_size,
                                  QmiEndian endian,
                                  gint64 *in);

qmi_utils_write_gint64_to_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_write_gint64() instead.

Writes a signed 64-bit integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least 8 bytes long.

Also note that both buffer and buffer_size get updated after the 8 bytes write.

Parameters

buffer

a buffer.

 

buffer_size

size of buffer .

 

endian

endianness of firmware value; swapped from host byte order if necessary

 

in

location of the variable to be written.

 

Since: 1.0


qmi_utils_write_sized_guint_to_buffer ()

void
qmi_utils_write_sized_guint_to_buffer (guint8 **buffer,
                                       guint16 *buffer_size,
                                       guint n_bytes,
                                       QmiEndian endian,
                                       guint64 *in);

qmi_utils_write_sized_guint_to_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_write_sized_guint() instead.

Writes a n_bytes -sized unsigned integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least n_bytes bytes long.

Also note that both buffer and buffer_size get updated after the n_bytes bytes write.

Parameters

buffer

a buffer.

 

buffer_size

size of buffer .

 

n_bytes

number of bytes to write.

 

endian

endianness of firmware value; swapped from host byte order if necessary

 

in

location of the variable to be written.

 

Since: 1.0


qmi_utils_write_string_to_buffer ()

void
qmi_utils_write_string_to_buffer (guint8 **buffer,
                                  guint16 *buffer_size,
                                  guint8 length_prefix_size,
                                  const gchar *in);

qmi_utils_write_string_to_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_write_string() instead.

Writes a string to the buffer.

If length_prefix_size is greater than 0, a length prefix integer will be included in the write operation.

The user needs to make sure that the buffer has enough space for both the whole string and the length prefix.

Also note that both buffer and buffer_size get updated after the write.

Parameters

buffer

a buffer.

 

buffer_size

size of buffer .

 

length_prefix_size

size of the length prefix integer in bits.

 

in

string to write.

 

Since: 1.0


qmi_utils_write_fixed_size_string_to_buffer ()

void
qmi_utils_write_fixed_size_string_to_buffer
                               (guint8 **buffer,
                                guint16 *buffer_size,
                                guint16 fixed_size,
                                const gchar *in);

qmi_utils_write_fixed_size_string_to_buffer has been deprecated since version 1.12 and should not be used in newly-written code.

Use qmi_message_tlv_write_string() instead.

Writes a fixed_size -sized string to the buffer, without any length prefix.

The user needs to make sure that the buffer is at least fixed_size bytes long.

Also note that both buffer and buffer_size get updated after the fixed_size bytes write.

Parameters

buffer

a buffer.

 

buffer_size

size of buffer .

 

fixed_size

number of bytes to write.

 

in

string to write.

 

Since: 1.0


qmi_message_get_version_introduced ()

gboolean
qmi_message_get_version_introduced (QmiMessage *self,
                                    guint *major,
                                    guint *minor);

qmi_message_get_version_introduced has been deprecated since version 1.18 and should not be used in newly-written code.

Use qmi_message_get_version_introduced_full() instead.

Gets, if known, the service version in which the given message was first introduced.

Parameters

self

a QmiMessage.

 

major

return location for the major version.

[out]

minor

return location for the minor version.

[out]

Returns

TRUE if major and minor are set, FALSE otherwise.

Since: 1.0


qmi_message_get_version_introduced_full ()

gboolean
qmi_message_get_version_introduced_full
                               (QmiMessage *self,
                                QmiMessageContext *context,
                                guint *major,
                                guint *minor);

qmi_message_get_version_introduced_full has been deprecated since version 1.26 and should not be used in newly-written code.

The version information of each message is no longer available.

Gets, if known, the service version in which the given message was first introduced.

The lookup of the version may be specific to the context provided, e.g. for vendor-specific messages.

If no context given, the behavior is the same as qmi_message_get_version_introduced().

Since 1.26, this method will return FALSE as the library no longer provides version information for each message, given that this information was never reliable.

Parameters

self

a QmiMessage.

 

context

a QmiMessageContext.

 

major

return location for the major version.

[out]

minor

return location for the minor version.

[out]

Returns

TRUE if major and minor are set, FALSE otherwise.

Since: 1.18


qmi_message_get_printable ()

gchar *
qmi_message_get_printable (QmiMessage *self,
                           const gchar *line_prefix);

qmi_message_get_printable has been deprecated since version 1.18 and should not be used in newly-written code.

Use qmi_message_get_printable_full() instead.

Gets a printable string with the contents of the whole QMI message.

If known, the printable string will contain translated TLV values as well as the raw data buffer contents.

Parameters

self

a QmiMessage.

 

line_prefix

prefix string to use in each new generated line.

 

Returns

a newly allocated string, which should be freed with g_free().

[transfer full]

Since: 1.0


qmi_message_dms_set_service_programming_code_input_get_new ()

gboolean
qmi_message_dms_set_service_programming_code_input_get_new
                               (QmiMessageDmsSetServiceProgrammingCodeInput *self,
                                const gchar **arg_new,
                                GError **error);

qmi_message_dms_set_service_programming_code_input_get_new has been deprecated since version 1.14.0 and should not be used in newly-written code.

Use qmi_message_dms_set_service_programming_code_input_get_new_code() instead.

Get the 'New Code' field from self .

Parameters

self

a QmiMessageDmsSetServiceProgrammingCodeInput.

 

arg_new

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.0


qmi_message_dms_set_service_programming_code_input_set_new ()

gboolean
qmi_message_dms_set_service_programming_code_input_set_new
                               (QmiMessageDmsSetServiceProgrammingCodeInput *self,
                                const gchar *arg_new,
                                GError **error);

qmi_message_dms_set_service_programming_code_input_set_new has been deprecated since version 1.14.0 and should not be used in newly-written code.

Use qmi_message_dms_set_service_programming_code_input_set_new_code() instead.

Set the 'New Code' field in the message.

Parameters

self

a QmiMessageDmsSetServiceProgrammingCodeInput.

 

arg_new

a constant string of exactly 6 characters.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

Since: 1.0


qmi_message_dms_set_service_programming_code_input_get_current ()

gboolean
qmi_message_dms_set_service_programming_code_input_get_current
                               (QmiMessageDmsSetServiceProgrammingCodeInput *self,
                                const gchar **arg_current,
                                GError **error);

qmi_message_dms_set_service_programming_code_input_get_current has been deprecated since version 1.14.0 and should not be used in newly-written code.

Use qmi_message_dms_set_service_programming_code_input_get_current_code() instead.

Get the 'Current Code' field from self .

Parameters

self

a QmiMessageDmsSetServiceProgrammingCodeInput.

 

arg_current

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.0


qmi_message_dms_set_service_programming_code_input_set_current ()

gboolean
qmi_message_dms_set_service_programming_code_input_set_current
                               (QmiMessageDmsSetServiceProgrammingCodeInput *self,
                                const gchar *arg_current,
                                GError **error);

qmi_message_dms_set_service_programming_code_input_set_current has been deprecated since version 1.14.0 and should not be used in newly-written code.

Use qmi_message_dms_set_service_programming_code_input_set_current_code() instead.

Get the 'Current Code' field from self .

Parameters

self

a QmiMessageDmsSetServiceProgrammingCodeInput.

 

arg_current

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.0


qmi_message_tlv_read_gfloat ()

gboolean
qmi_message_tlv_read_gfloat (QmiMessage *self,
                             gsize tlv_offset,
                             gsize *offset,
                             gfloat *out,
                             GError **error);

qmi_message_tlv_read_gfloat has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_tlv_read_gfloat_endian() instead.

Reads a 32-bit floating-point number from the TLV.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

The implementation assumes the float is encoded with the same endianness as the host, which may not be true. The use of this method is discouraged, and new code should use qmi_message_tlv_read_gfloat_endian() instead.

Parameters

self

a QmiMessage.

 

tlv_offset

offset that was returned by qmi_message_tlv_read_init().

 

offset

address of a the offset within the TLV value.

 

out

return location for the read gfloat.

 

error

return location for error or NULL.

 

Returns

TRUE if the variable is successfully read, otherwise FALSE is returned and error is set.

Since: 1.12


qmi_message_uim_change_pin_input_get_session_information ()

gboolean
qmi_message_uim_change_pin_input_get_session_information
                               (QmiMessageUimChangePinInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_change_pin_input_get_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_change_pin_input_get_session() instead.

Get the 'Session Information' field from self .

Parameters

self

a QmiMessageUimChangePinInput.

 

value_session_information_session_type

a placeholder for the output QmiUimSessionType, or NULL if not required.

 

value_session_information_application_identifier

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.14


qmi_message_uim_change_pin_input_set_session_information ()

gboolean
qmi_message_uim_change_pin_input_set_session_information
                               (QmiMessageUimChangePinInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_change_pin_input_set_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_change_pin_input_set_session() instead.

Set the 'Session Information' field in the message.

Parameters

self

a QmiMessageUimChangePinInput.

 

value_session_information_session_type

a QmiUimSessionType.

 

value_session_information_application_identifier

a constant string.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

Since: 1.14


qmi_message_uim_get_file_attributes_input_get_session_information ()

gboolean
qmi_message_uim_get_file_attributes_input_get_session_information
                               (QmiMessageUimGetFileAttributesInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_get_file_attributes_input_get_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_get_file_attributes_input_get_session() instead.

Get the 'Session Information' field from self .

Parameters

self

a QmiMessageUimGetFileAttributesInput.

 

value_session_information_session_type

a placeholder for the output QmiUimSessionType, or NULL if not required.

 

value_session_information_application_identifier

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.6


qmi_message_uim_get_file_attributes_input_set_session_information ()

gboolean
qmi_message_uim_get_file_attributes_input_set_session_information
                               (QmiMessageUimGetFileAttributesInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_get_file_attributes_input_set_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_get_file_attributes_input_set_session() instead.

Set the 'Session Information' field in the message.

Parameters

self

a QmiMessageUimGetFileAttributesInput.

 

value_session_information_session_type

a QmiUimSessionType.

 

value_session_information_application_identifier

a constant string.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

Since: 1.6


qmi_message_uim_read_record_input_get_session_information ()

gboolean
qmi_message_uim_read_record_input_get_session_information
                               (QmiMessageUimReadRecordInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_read_record_input_get_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_read_record_input_get_session_information() instead.

Get the 'Session Information' field from self .

Parameters

self

a QmiMessageUimReadRecordInput.

 

value_session_information_session_type

a placeholder for the output QmiUimSessionType, or NULL if not required.

 

value_session_information_application_identifier

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.6


qmi_message_uim_read_record_input_set_session_information ()

gboolean
qmi_message_uim_read_record_input_set_session_information
                               (QmiMessageUimReadRecordInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_read_record_input_set_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_read_record_input_set_session() instead.

Set the 'Session Information' field in the message.

Parameters

self

a QmiMessageUimReadRecordInput.

 

value_session_information_session_type

a QmiUimSessionType.

 

value_session_information_application_identifier

a constant string.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

Since: 1.6


qmi_message_uim_read_transparent_input_get_session_information ()

gboolean
qmi_message_uim_read_transparent_input_get_session_information
                               (QmiMessageUimReadTransparentInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_read_transparent_input_get_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_read_transparent_input_get_session() instead.

Get the 'Session Information' field from self .

Parameters

self

a QmiMessageUimReadTransparentInput.

 

value_session_information_session_type

a placeholder for the output QmiUimSessionType, or NULL if not required.

 

value_session_information_application_identifier

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.6


qmi_message_uim_read_transparent_input_set_session_information ()

gboolean
qmi_message_uim_read_transparent_input_set_session_information
                               (QmiMessageUimReadTransparentInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_read_transparent_input_set_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_read_transparent_input_set_session() instead.

Set the 'Session Information' field in the message.

Parameters

self

a QmiMessageUimReadTransparentInput.

 

value_session_information_session_type

a QmiUimSessionType.

 

value_session_information_application_identifier

a constant string.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

Since: 1.6


qmi_message_uim_set_pin_protection_input_get_session_information ()

gboolean
qmi_message_uim_set_pin_protection_input_get_session_information
                               (QmiMessageUimSetPinProtectionInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_set_pin_protection_input_get_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_set_pin_protection_input_get_session() instead.

Get the 'Session Information' field from self .

Parameters

self

a QmiMessageUimSetPinProtectionInput.

 

value_session_information_session_type

a placeholder for the output QmiUimSessionType, or NULL if not required.

 

value_session_information_application_identifier

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.14


qmi_message_uim_set_pin_protection_input_set_session_information ()

gboolean
qmi_message_uim_set_pin_protection_input_set_session_information
                               (QmiMessageUimSetPinProtectionInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_set_pin_protection_input_set_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_set_pin_protection_input_set_session() instead.

Set the 'Session Information' field in the message.

Parameters

self

a QmiMessageUimSetPinProtectionInput.

 

value_session_information_session_type

a QmiUimSessionType.

 

value_session_information_application_identifier

a constant string.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

Since: 1.14


qmi_message_uim_unblock_pin_input_get_session_information ()

gboolean
qmi_message_uim_unblock_pin_input_get_session_information
                               (QmiMessageUimUnblockPinInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_unblock_pin_input_get_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_unblock_pin_input_get_session() instead.

Get the 'Session Information' field from self .

Parameters

self

a QmiMessageUimUnblockPinInput.

 

value_session_information_session_type

a placeholder for the output QmiUimSessionType, or NULL if not required.

 

value_session_information_application_identifier

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.14


qmi_message_uim_unblock_pin_input_set_session_information ()

gboolean
qmi_message_uim_unblock_pin_input_set_session_information
                               (QmiMessageUimUnblockPinInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_unblock_pin_input_set_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_unblock_pin_input_set_session() instead.

Set the 'Session Information' field in the message.

Parameters

self

a QmiMessageUimUnblockPinInput.

 

value_session_information_session_type

a QmiUimSessionType.

 

value_session_information_application_identifier

a constant string.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

Since: 1.14


qmi_message_uim_verify_pin_input_get_session_information ()

gboolean
qmi_message_uim_verify_pin_input_get_session_information
                               (QmiMessageUimVerifyPinInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_verify_pin_input_get_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_verify_pin_input_get_session() instead.

Get the 'Session Information' field from self .

Parameters

self

a QmiMessageUimVerifyPinInput.

 

value_session_information_session_type

a placeholder for the output QmiUimSessionType, or NULL if not required.

 

value_session_information_application_identifier

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.14


qmi_message_uim_verify_pin_input_set_session_information ()

gboolean
qmi_message_uim_verify_pin_input_set_session_information
                               (QmiMessageUimVerifyPinInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

qmi_message_uim_verify_pin_input_set_session_information has been deprecated since version 1.22 and should not be used in newly-written code.

Use qmi_message_uim_verify_pin_input_set_session() instead.

Set the 'Session Information' field in the message.

Parameters

self

a QmiMessageUimVerifyPinInput.

 

value_session_information_session_type

a QmiUimSessionType.

 

value_session_information_application_identifier

a constant string.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

Since: 1.14


qmi_message_nas_get_operator_name_output_get_operator_nitz_information ()

gboolean
qmi_message_nas_get_operator_name_output_get_operator_nitz_information
                               (QmiMessageNasGetOperatorNameOutput *self,
                                QmiNasPlmnEncodingScheme *value_operator_nitz_information_name_encoding,
                                QmiNasPlmnNameCountryInitials *value_operator_nitz_information_short_country_initials,
                                QmiNasPlmnNameSpareBits *value_operator_nitz_information_long_name_spare_bits,
                                QmiNasPlmnNameSpareBits *value_operator_nitz_information_short_name_spare_bits,
                                const gchar **value_operator_nitz_information_long_name,
                                const gchar **value_operator_nitz_information_short_name,
                                GError **error);

qmi_message_nas_get_operator_name_output_get_operator_nitz_information has been deprecated since version 1.24.6 and should not be used in newly-written code.

Use qmi_message_nas_get_operator_name_output_get_nitz_information() instead.

Get the 'Operator NITZ Information' field from self .

Parameters

self

a QmiMessageNasGetOperatorNameOutput.

 

value_operator_nitz_information_name_encoding

a placeholder for the output QmiNasPlmnEncodingScheme, or NULL if not required.

 

value_operator_nitz_information_short_country_initials

a placeholder for the output QmiNasPlmnNameCountryInitials, or NULL if not required.

 

value_operator_nitz_information_long_name_spare_bits

a placeholder for the output QmiNasPlmnNameSpareBits, or NULL if not required.

 

value_operator_nitz_information_short_name_spare_bits

a placeholder for the output QmiNasPlmnNameSpareBits, or NULL if not required.

 

value_operator_nitz_information_long_name

a placeholder for the output constant string, or NULL if not required.

 

value_operator_nitz_information_short_name

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.18


qmi_indication_nas_operator_name_output_get_operator_nitz_information ()

gboolean
qmi_indication_nas_operator_name_output_get_operator_nitz_information
                               (QmiIndicationNasOperatorNameOutput *self,
                                QmiNasPlmnEncodingScheme *value_operator_nitz_information_name_encoding,
                                QmiNasPlmnNameCountryInitials *value_operator_nitz_information_short_country_initials,
                                QmiNasPlmnNameSpareBits *value_operator_nitz_information_long_name_spare_bits,
                                QmiNasPlmnNameSpareBits *value_operator_nitz_information_short_name_spare_bits,
                                const gchar **value_operator_nitz_information_long_name,
                                const gchar **value_operator_nitz_information_short_name,
                                GError **error);

qmi_indication_nas_operator_name_output_get_operator_nitz_information has been deprecated since version 1.24.6 and should not be used in newly-written code.

Use qmi_indication_nas_operator_name_output_get_nitz_information() instead.

Get the 'Operator NITZ Information' field from self .

Parameters

self

a QmiIndicationNasOperatorNameOutput.

 

value_operator_nitz_information_name_encoding

a placeholder for the output QmiNasPlmnEncodingScheme, or NULL if not required.

 

value_operator_nitz_information_short_country_initials

a placeholder for the output QmiNasPlmnNameCountryInitials, or NULL if not required.

 

value_operator_nitz_information_long_name_spare_bits

a placeholder for the output QmiNasPlmnNameSpareBits, or NULL if not required.

 

value_operator_nitz_information_short_name_spare_bits

a placeholder for the output QmiNasPlmnNameSpareBits, or NULL if not required.

 

value_operator_nitz_information_long_name

a placeholder for the output constant string, or NULL if not required.

 

value_operator_nitz_information_short_name

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.18


qmi_message_nas_get_home_network_output_get_home_network_3gpp2 ()

gboolean
qmi_message_nas_get_home_network_output_get_home_network_3gpp2
                               (QmiMessageNasGetHomeNetworkOutput *self,
                                guint16 *value_home_network_3gpp2_mcc,
                                guint16 *value_home_network_3gpp2_mnc,
                                QmiNasNetworkDescriptionDisplay *value_home_network_3gpp2_display_description,
                                QmiNasNetworkDescriptionEncoding *value_home_network_3gpp2_description_encoding,
                                const gchar **value_home_network_3gpp2_description,
                                GError **error);

qmi_message_nas_get_home_network_output_get_home_network_3gpp2 has been deprecated since version 1.24.6 and should not be used in newly-written code.

Use qmi_message_nas_get_home_network_output_get_home_network_3gpp2_ext() instead.

Get the 'Home Network 3GPP2' field from self .

Parameters

self

a QmiMessageNasGetHomeNetworkOutput.

 

value_home_network_3gpp2_mcc

a placeholder for the output guint16, or NULL if not required.

 

value_home_network_3gpp2_mnc

a placeholder for the output guint16, or NULL if not required.

 

value_home_network_3gpp2_display_description

a placeholder for the output QmiNasNetworkDescriptionDisplay, or NULL if not required.

 

value_home_network_3gpp2_description_encoding

a placeholder for the output QmiNasNetworkDescriptionEncoding, or NULL if not required.

 

value_home_network_3gpp2_description

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.0


qmi_message_nas_get_cell_location_info_output_get_geran_info ()

gboolean
qmi_message_nas_get_cell_location_info_output_get_geran_info
                               (QmiMessageNasGetCellLocationInfoOutput *self,
                                guint32 *value_geran_info_cell_id,
                                const gchar **value_geran_info_plmn,
                                guint16 *value_geran_info_lac,
                                guint16 *value_geran_info_geran_absolute_rf_channel_number,
                                guint8 *value_geran_info_base_station_identity_code,
                                guint32 *value_geran_info_timing_advance,
                                guint16 *value_geran_info_rx_level,
                                GArray **value_geran_info_cell,
                                GError **error);

qmi_message_nas_get_cell_location_info_output_get_geran_info has been deprecated since version 1.26.6. and should not be used in newly-written code.

Use qmi_message_nas_get_cell_location_info_output_get_geran_info_v2() instead.

Get the 'GERAN Info' field from self .

This method is deprecated and returns an empty value_geran_info_plmn string.

Parameters

self

a QmiMessageNasGetCellLocationInfoOutput.

 

value_geran_info_cell_id

a placeholder for the output guint32, or NULL if not required.

[out]

value_geran_info_plmn

a placeholder for the output constant string, or NULL if not required.

[out]

value_geran_info_lac

a placeholder for the output guint16, or NULL if not required.

[out]

value_geran_info_geran_absolute_rf_channel_number

a placeholder for the output guint16, or NULL if not required.

[out]

value_geran_info_base_station_identity_code

a placeholder for the output guint8, or NULL if not required.

[out]

value_geran_info_timing_advance

a placeholder for the output guint32, or NULL if not required.

[out]

value_geran_info_rx_level

a placeholder for the output guint16, or NULL if not required.

[out]

value_geran_info_cell

a placeholder for the output GArray of QmiMessageNasGetCellLocationInfoOutputGeranInfoCellElement elements, or NULL if not required. Do not free it, it is owned by self .

[out][element-type QmiMessageNasGetCellLocationInfoOutputGeranInfoCellElement][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.10


qmi_message_nas_get_cell_location_info_output_get_umts_info ()

gboolean
qmi_message_nas_get_cell_location_info_output_get_umts_info
                               (QmiMessageNasGetCellLocationInfoOutput *self,
                                guint16 *value_umts_info_cell_id,
                                const gchar **value_umts_info_plmn,
                                guint16 *value_umts_info_lac,
                                guint16 *value_umts_info_utra_absolute_rf_channel_number,
                                guint16 *value_umts_info_primary_scrambling_code,
                                gint16 *value_umts_info_rscp,
                                gint16 *value_umts_info_ecio,
                                GArray **value_umts_info_cell,
                                GArray **value_umts_info_neighboring_geran,
                                GError **error);

qmi_message_nas_get_cell_location_info_output_get_umts_info has been deprecated since version 1.26.6. and should not be used in newly-written code.

Use qmi_message_nas_get_cell_location_info_output_get_umts_info_v2() instead.

Get the 'UMTS Info' field from self .

This method is deprecated and returns an empty value_umts_info_plmn string.

Parameters

self

a QmiMessageNasGetCellLocationInfoOutput.

 

value_umts_info_cell_id

a placeholder for the output guint16, or NULL if not required.

[out]

value_umts_info_plmn

a placeholder for the output constant string, or NULL if not required.

[out]

value_umts_info_lac

a placeholder for the output guint16, or NULL if not required.

[out]

value_umts_info_utra_absolute_rf_channel_number

a placeholder for the output guint16, or NULL if not required.

[out]

value_umts_info_primary_scrambling_code

a placeholder for the output guint16, or NULL if not required.

[out]

value_umts_info_rscp

a placeholder for the output gint16, or NULL if not required.

[out]

value_umts_info_ecio

a placeholder for the output gint16, or NULL if not required.

[out]

value_umts_info_cell

a placeholder for the output GArray of QmiMessageNasGetCellLocationInfoOutputUmtsInfoCellElement elements, or NULL if not required. Do not free it, it is owned by self .

[out][element-type QmiMessageNasGetCellLocationInfoOutputUmtsInfoCellElement][transfer none]

value_umts_info_neighboring_geran

a placeholder for the output GArray of QmiMessageNasGetCellLocationInfoOutputUmtsInfoNeighboringGeranElement elements, or NULL if not required. Do not free it, it is owned by self .

[out][element-type QmiMessageNasGetCellLocationInfoOutputUmtsInfoNeighboringGeranElement][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.10


qmi_message_nas_get_cell_location_info_output_get_intrafrequency_lte_info ()

gboolean
qmi_message_nas_get_cell_location_info_output_get_intrafrequency_lte_info
                               (QmiMessageNasGetCellLocationInfoOutput *self,
                                gboolean *value_intrafrequency_lte_info_ue_in_idle,
                                const gchar **value_intrafrequency_lte_info_plmn,
                                guint16 *value_intrafrequency_lte_info_tracking_area_code,
                                guint32 *value_intrafrequency_lte_info_global_cell_id,
                                guint16 *value_intrafrequency_lte_info_eutra_absolute_rf_channel_number,
                                guint16 *value_intrafrequency_lte_info_serving_cell_id,
                                guint8 *value_intrafrequency_lte_info_cell_reselection_priority,
                                guint8 *value_intrafrequency_lte_info_s_non_intra_search_threshold,
                                guint8 *value_intrafrequency_lte_info_serving_cell_low_threshold,
                                guint8 *value_intrafrequency_lte_info_s_intra_search_threshold,
                                GArray **value_intrafrequency_lte_info_cell,
                                GError **error);

qmi_message_nas_get_cell_location_info_output_get_intrafrequency_lte_info has been deprecated since version 1.26.6. and should not be used in newly-written code.

Use qmi_message_nas_get_cell_location_info_output_get_intrafrequency_lte_info_v2() instead.

Get the 'Intrafrequency LTE Info' field from self .

This method is deprecated and returns an empty value_intrafrequency_lte_info_plmn string.

Parameters

self

a QmiMessageNasGetCellLocationInfoOutput.

 

value_intrafrequency_lte_info_ue_in_idle

a placeholder for the output gboolean, or NULL if not required.

[out]

value_intrafrequency_lte_info_plmn

a placeholder for the output constant string, or NULL if not required.

[out]

value_intrafrequency_lte_info_tracking_area_code

a placeholder for the output guint16, or NULL if not required.

[out]

value_intrafrequency_lte_info_global_cell_id

a placeholder for the output guint32, or NULL if not required.

[out]

value_intrafrequency_lte_info_eutra_absolute_rf_channel_number

a placeholder for the output guint16, or NULL if not required.

[out]

value_intrafrequency_lte_info_serving_cell_id

a placeholder for the output guint16, or NULL if not required.

[out]

value_intrafrequency_lte_info_cell_reselection_priority

a placeholder for the output guint8, or NULL if not required.

[out]

value_intrafrequency_lte_info_s_non_intra_search_threshold

a placeholder for the output guint8, or NULL if not required.

[out]

value_intrafrequency_lte_info_serving_cell_low_threshold

a placeholder for the output guint8, or NULL if not required.

[out]

value_intrafrequency_lte_info_s_intra_search_threshold

a placeholder for the output guint8, or NULL if not required.

[out]

value_intrafrequency_lte_info_cell

a placeholder for the output GArray of QmiMessageNasGetCellLocationInfoOutputIntrafrequencyLteInfoCellElement elements, or NULL if not required. Do not free it, it is owned by self .

[out][element-type QmiMessageNasGetCellLocationInfoOutputIntrafrequencyLteInfoCellElement][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.10


qmi_message_nas_get_system_info_output_get_gsm_system_info ()

gboolean
qmi_message_nas_get_system_info_output_get_gsm_system_info
                               (QmiMessageNasGetSystemInfoOutput *self,
                                gboolean *value_gsm_system_info_domain_valid,
                                QmiNasNetworkServiceDomain *value_gsm_system_info_domain,
                                gboolean *value_gsm_system_info_service_capability_valid,
                                QmiNasNetworkServiceDomain *value_gsm_system_info_service_capability,
                                gboolean *value_gsm_system_info_roaming_status_valid,
                                QmiNasRoamingStatus *value_gsm_system_info_roaming_status,
                                gboolean *value_gsm_system_info_forbidden_valid,
                                gboolean *value_gsm_system_info_forbidden,
                                gboolean *value_gsm_system_info_lac_valid,
                                guint16 *value_gsm_system_info_lac,
                                gboolean *value_gsm_system_info_cid_valid,
                                guint32 *value_gsm_system_info_cid,
                                gboolean *value_gsm_system_info_registration_reject_info_valid,
                                QmiNasNetworkServiceDomain *value_gsm_system_info_registration_reject_domain,
                                guint8 *value_gsm_system_info_registration_reject_cause,
                                gboolean *value_gsm_system_info_network_id_valid,
                                const gchar **value_gsm_system_info_mcc,
                                const gchar **value_gsm_system_info_mnc,
                                gboolean *value_gsm_system_info_egprs_support_valid,
                                gboolean *value_gsm_system_info_egprs_support,
                                gboolean *value_gsm_system_info_dtm_support_valid,
                                gboolean *value_gsm_system_info_dtm_support,
                                GError **error);

qmi_message_nas_get_system_info_output_get_gsm_system_info has been deprecated since version 1.30. and should not be used in newly-written code.

Use qmi_message_nas_get_system_info_output_get_gsm_system_info_v2() instead.

Get the 'GSM System Info' field from self .

Parameters

self

a QmiMessageNasGetSystemInfoOutput.

 

value_gsm_system_info_domain_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_gsm_system_info_service_capability_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_service_capability

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_gsm_system_info_roaming_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_roaming_status

a placeholder for the output QmiNasRoamingStatus, or NULL if not required.

[out]

value_gsm_system_info_forbidden_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_forbidden

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_lac_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_lac

a placeholder for the output guint16, or NULL if not required.

[out]

value_gsm_system_info_cid_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_cid

a placeholder for the output guint32, or NULL if not required.

[out]

value_gsm_system_info_registration_reject_info_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_registration_reject_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_gsm_system_info_registration_reject_cause

a placeholder for the output guint8, or NULL if not required.

[out]

value_gsm_system_info_network_id_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_mcc

a placeholder for the output constant string, or NULL if not required.

[out]

value_gsm_system_info_mnc

a placeholder for the output constant string, or NULL if not required.

[out]

value_gsm_system_info_egprs_support_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_egprs_support

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_dtm_support_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_dtm_support

a placeholder for the output gboolean, or NULL if not required.

[out]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.0


qmi_message_nas_get_system_info_output_get_lte_system_info ()

gboolean
qmi_message_nas_get_system_info_output_get_lte_system_info
                               (QmiMessageNasGetSystemInfoOutput *self,
                                gboolean *value_lte_system_info_domain_valid,
                                QmiNasNetworkServiceDomain *value_lte_system_info_domain,
                                gboolean *value_lte_system_info_service_capability_valid,
                                QmiNasNetworkServiceDomain *value_lte_system_info_service_capability,
                                gboolean *value_lte_system_info_roaming_status_valid,
                                QmiNasRoamingStatus *value_lte_system_info_roaming_status,
                                gboolean *value_lte_system_info_forbidden_valid,
                                gboolean *value_lte_system_info_forbidden,
                                gboolean *value_lte_system_info_lac_valid,
                                guint16 *value_lte_system_info_lac,
                                gboolean *value_lte_system_info_cid_valid,
                                guint32 *value_lte_system_info_cid,
                                gboolean *value_lte_system_info_registration_reject_info_valid,
                                QmiNasNetworkServiceDomain *value_lte_system_info_registration_reject_domain,
                                guint8 *value_lte_system_info_registration_reject_cause,
                                gboolean *value_lte_system_info_network_id_valid,
                                const gchar **value_lte_system_info_mcc,
                                const gchar **value_lte_system_info_mnc,
                                gboolean *value_lte_system_info_tac_valid,
                                guint16 *value_lte_system_info_tac,
                                GError **error);

qmi_message_nas_get_system_info_output_get_lte_system_info has been deprecated since version 1.30. and should not be used in newly-written code.

Use qmi_message_nas_get_system_info_output_get_lte_system_info_v2() instead.

Get the 'LTE System Info' field from self .

Parameters

self

a QmiMessageNasGetSystemInfoOutput.

 

value_lte_system_info_domain_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_lte_system_info_service_capability_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_service_capability

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_lte_system_info_roaming_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_roaming_status

a placeholder for the output QmiNasRoamingStatus, or NULL if not required.

[out]

value_lte_system_info_forbidden_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_forbidden

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_lac_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_lac

a placeholder for the output guint16, or NULL if not required.

[out]

value_lte_system_info_cid_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_cid

a placeholder for the output guint32, or NULL if not required.

[out]

value_lte_system_info_registration_reject_info_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_registration_reject_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_lte_system_info_registration_reject_cause

a placeholder for the output guint8, or NULL if not required.

[out]

value_lte_system_info_network_id_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_mcc

a placeholder for the output constant string, or NULL if not required.

[out]

value_lte_system_info_mnc

a placeholder for the output constant string, or NULL if not required.

[out]

value_lte_system_info_tac_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_tac

a placeholder for the output guint16, or NULL if not required.

[out]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.0


qmi_message_nas_get_system_info_output_get_td_scdma_system_info ()

gboolean
qmi_message_nas_get_system_info_output_get_td_scdma_system_info
                               (QmiMessageNasGetSystemInfoOutput *self,
                                gboolean *value_td_scdma_system_info_domain_valid,
                                QmiNasNetworkServiceDomain *value_td_scdma_system_info_domain,
                                gboolean *value_td_scdma_system_info_service_capability_valid,
                                QmiNasNetworkServiceDomain *value_td_scdma_system_info_service_capability,
                                gboolean *value_td_scdma_system_info_roaming_status_valid,
                                QmiNasRoamingStatus *value_td_scdma_system_info_roaming_status,
                                gboolean *value_td_scdma_system_info_forbidden_valid,
                                gboolean *value_td_scdma_system_info_forbidden,
                                gboolean *value_td_scdma_system_info_lac_valid,
                                guint16 *value_td_scdma_system_info_lac,
                                gboolean *value_td_scdma_system_info_cid_valid,
                                guint32 *value_td_scdma_system_info_cid,
                                gboolean *value_td_scdma_system_info_registration_reject_info_valid,
                                QmiNasNetworkServiceDomain *value_td_scdma_system_info_registration_reject_domain,
                                guint8 *value_td_scdma_system_info_registration_reject_cause,
                                gboolean *value_td_scdma_system_info_network_id_valid,
                                const gchar **value_td_scdma_system_info_mcc,
                                const gchar **value_td_scdma_system_info_mnc,
                                gboolean *value_td_scdma_system_info_hs_call_status_valid,
                                QmiNasWcdmaHsService *value_td_scdma_system_info_hs_call_status,
                                gboolean *value_td_scdma_system_info_hs_service_valid,
                                QmiNasWcdmaHsService *value_td_scdma_system_info_hs_service,
                                gboolean *value_td_scdma_system_info_cell_parameter_id_valid,
                                guint16 *value_td_scdma_system_info_cell_parameter_id,
                                gboolean *value_td_scdma_system_info_cell_broadcast_support_valid,
                                QmiNasCellBroadcastCapability *value_td_scdma_system_info_cell_broadcast_support,
                                gboolean *value_td_scdma_system_info_cs_call_barring_status_valid,
                                QmiNasCallBarringStatus *value_td_scdma_system_info_cs_call_barring_status,
                                gboolean *value_td_scdma_system_info_ps_call_barring_status_valid,
                                QmiNasCallBarringStatus *value_td_scdma_system_info_ps_call_barring_status,
                                gboolean *value_td_scdma_system_info_cipher_domain_valid,
                                QmiNasNetworkServiceDomain *value_td_scdma_system_info_cipher_domain,
                                GError **error);

qmi_message_nas_get_system_info_output_get_td_scdma_system_info has been deprecated since version 1.30. and should not be used in newly-written code.

Use qmi_message_nas_get_system_info_output_get_td_scdma_system_info_v2() instead.

Get the 'TD SCDMA System Info' field from self .

Parameters

self

a QmiMessageNasGetSystemInfoOutput.

 

value_td_scdma_system_info_domain_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_td_scdma_system_info_service_capability_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_service_capability

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_td_scdma_system_info_roaming_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_roaming_status

a placeholder for the output QmiNasRoamingStatus, or NULL if not required.

[out]

value_td_scdma_system_info_forbidden_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_forbidden

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_lac_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_lac

a placeholder for the output guint16, or NULL if not required.

[out]

value_td_scdma_system_info_cid_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_cid

a placeholder for the output guint32, or NULL if not required.

[out]

value_td_scdma_system_info_registration_reject_info_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_registration_reject_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_td_scdma_system_info_registration_reject_cause

a placeholder for the output guint8, or NULL if not required.

[out]

value_td_scdma_system_info_network_id_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_mcc

a placeholder for the output constant string, or NULL if not required.

[out]

value_td_scdma_system_info_mnc

a placeholder for the output constant string, or NULL if not required.

[out]

value_td_scdma_system_info_hs_call_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_hs_call_status

a placeholder for the output QmiNasWcdmaHsService, or NULL if not required.

[out]

value_td_scdma_system_info_hs_service_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_hs_service

a placeholder for the output QmiNasWcdmaHsService, or NULL if not required.

[out]

value_td_scdma_system_info_cell_parameter_id_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_cell_parameter_id

a placeholder for the output guint16, or NULL if not required.

[out]

value_td_scdma_system_info_cell_broadcast_support_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_cell_broadcast_support

a placeholder for the output QmiNasCellBroadcastCapability, or NULL if not required.

[out]

value_td_scdma_system_info_cs_call_barring_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_cs_call_barring_status

a placeholder for the output QmiNasCallBarringStatus, or NULL if not required.

[out]

value_td_scdma_system_info_ps_call_barring_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_ps_call_barring_status

a placeholder for the output QmiNasCallBarringStatus, or NULL if not required.

[out]

value_td_scdma_system_info_cipher_domain_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scdma_system_info_cipher_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.0


qmi_message_nas_get_system_info_output_get_wcdma_system_info ()

gboolean
qmi_message_nas_get_system_info_output_get_wcdma_system_info
                               (QmiMessageNasGetSystemInfoOutput *self,
                                gboolean *value_wcdma_system_info_domain_valid,
                                QmiNasNetworkServiceDomain *value_wcdma_system_info_domain,
                                gboolean *value_wcdma_system_info_service_capability_valid,
                                QmiNasNetworkServiceDomain *value_wcdma_system_info_service_capability,
                                gboolean *value_wcdma_system_info_roaming_status_valid,
                                QmiNasRoamingStatus *value_wcdma_system_info_roaming_status,
                                gboolean *value_wcdma_system_info_forbidden_valid,
                                gboolean *value_wcdma_system_info_forbidden,
                                gboolean *value_wcdma_system_info_lac_valid,
                                guint16 *value_wcdma_system_info_lac,
                                gboolean *value_wcdma_system_info_cid_valid,
                                guint32 *value_wcdma_system_info_cid,
                                gboolean *value_wcdma_system_info_registration_reject_info_valid,
                                QmiNasNetworkServiceDomain *value_wcdma_system_info_registration_reject_domain,
                                guint8 *value_wcdma_system_info_registration_reject_cause,
                                gboolean *value_wcdma_system_info_network_id_valid,
                                const gchar **value_wcdma_system_info_mcc,
                                const gchar **value_wcdma_system_info_mnc,
                                gboolean *value_wcdma_system_info_hs_call_status_valid,
                                QmiNasWcdmaHsService *value_wcdma_system_info_hs_call_status,
                                gboolean *value_wcdma_system_info_hs_service_valid,
                                QmiNasWcdmaHsService *value_wcdma_system_info_hs_service,
                                gboolean *value_wcdma_system_info_primary_scrambling_code_valid,
                                guint16 *value_wcdma_system_info_primary_scrambling_code,
                                GError **error);

qmi_message_nas_get_system_info_output_get_wcdma_system_info has been deprecated since version 1.30. and should not be used in newly-written code.

Use qmi_message_nas_get_system_info_output_get_wcdma_system_info_v2() instead.

Get the 'WCDMA System Info' field from self .

Parameters

self

a QmiMessageNasGetSystemInfoOutput.

 

value_wcdma_system_info_domain_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_wcdma_system_info_service_capability_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_service_capability

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_wcdma_system_info_roaming_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_roaming_status

a placeholder for the output QmiNasRoamingStatus, or NULL if not required.

[out]

value_wcdma_system_info_forbidden_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_forbidden

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_lac_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_lac

a placeholder for the output guint16, or NULL if not required.

[out]

value_wcdma_system_info_cid_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_cid

a placeholder for the output guint32, or NULL if not required.

[out]

value_wcdma_system_info_registration_reject_info_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_registration_reject_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_wcdma_system_info_registration_reject_cause

a placeholder for the output guint8, or NULL if not required.

[out]

value_wcdma_system_info_network_id_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_mcc

a placeholder for the output constant string, or NULL if not required.

[out]

value_wcdma_system_info_mnc

a placeholder for the output constant string, or NULL if not required.

[out]

value_wcdma_system_info_hs_call_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_hs_call_status

a placeholder for the output QmiNasWcdmaHsService, or NULL if not required.

[out]

value_wcdma_system_info_hs_service_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_hs_service

a placeholder for the output QmiNasWcdmaHsService, or NULL if not required.

[out]

value_wcdma_system_info_primary_scrambling_code_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_primary_scrambling_code

a placeholder for the output guint16, or NULL if not required.

[out]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.0


qmi_indication_nas_system_info_output_get_gsm_system_info ()

gboolean
qmi_indication_nas_system_info_output_get_gsm_system_info
                               (QmiIndicationNasSystemInfoOutput *self,
                                gboolean *value_gsm_system_info_domain_valid,
                                QmiNasNetworkServiceDomain *value_gsm_system_info_domain,
                                gboolean *value_gsm_system_info_service_capability_valid,
                                QmiNasNetworkServiceDomain *value_gsm_system_info_service_capability,
                                gboolean *value_gsm_system_info_roaming_status_valid,
                                QmiNasRoamingStatus *value_gsm_system_info_roaming_status,
                                gboolean *value_gsm_system_info_forbidden_valid,
                                gboolean *value_gsm_system_info_forbidden,
                                gboolean *value_gsm_system_info_lac_valid,
                                guint16 *value_gsm_system_info_lac,
                                gboolean *value_gsm_system_info_cid_valid,
                                guint32 *value_gsm_system_info_cid,
                                gboolean *value_gsm_system_info_registration_reject_info_valid,
                                QmiNasNetworkServiceDomain *value_gsm_system_info_registration_reject_domain,
                                guint8 *value_gsm_system_info_registration_reject_cause,
                                gboolean *value_gsm_system_info_network_id_valid,
                                const gchar **value_gsm_system_info_mcc,
                                const gchar **value_gsm_system_info_mnc,
                                gboolean *value_gsm_system_info_egprs_support_valid,
                                gboolean *value_gsm_system_info_egprs_support,
                                gboolean *value_gsm_system_info_dtm_support_valid,
                                gboolean *value_gsm_system_info_dtm_support,
                                GError **error);

qmi_indication_nas_system_info_output_get_gsm_system_info has been deprecated since version 1.30. and should not be used in newly-written code.

Use qmi_indication_nas_system_info_output_get_gsm_system_info_v2() instead.

Get the 'GSM System Info' field from self .

Parameters

self

a QmiIndicationNasSystemInfoOutput.

 

value_gsm_system_info_domain_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_gsm_system_info_service_capability_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_service_capability

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_gsm_system_info_roaming_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_roaming_status

a placeholder for the output QmiNasRoamingStatus, or NULL if not required.

[out]

value_gsm_system_info_forbidden_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_forbidden

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_lac_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_lac

a placeholder for the output guint16, or NULL if not required.

[out]

value_gsm_system_info_cid_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_cid

a placeholder for the output guint32, or NULL if not required.

[out]

value_gsm_system_info_registration_reject_info_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_registration_reject_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_gsm_system_info_registration_reject_cause

a placeholder for the output guint8, or NULL if not required.

[out]

value_gsm_system_info_network_id_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_mcc

a placeholder for the output constant string, or NULL if not required.

[out]

value_gsm_system_info_mnc

a placeholder for the output constant string, or NULL if not required.

[out]

value_gsm_system_info_egprs_support_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_egprs_support

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_dtm_support_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_gsm_system_info_dtm_support

a placeholder for the output gboolean, or NULL if not required.

[out]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.0


qmi_indication_nas_system_info_output_get_lte_system_info ()

gboolean
qmi_indication_nas_system_info_output_get_lte_system_info
                               (QmiIndicationNasSystemInfoOutput *self,
                                gboolean *value_lte_system_info_domain_valid,
                                QmiNasNetworkServiceDomain *value_lte_system_info_domain,
                                gboolean *value_lte_system_info_service_capability_valid,
                                QmiNasNetworkServiceDomain *value_lte_system_info_service_capability,
                                gboolean *value_lte_system_info_roaming_status_valid,
                                QmiNasRoamingStatus *value_lte_system_info_roaming_status,
                                gboolean *value_lte_system_info_forbidden_valid,
                                gboolean *value_lte_system_info_forbidden,
                                gboolean *value_lte_system_info_lac_valid,
                                guint16 *value_lte_system_info_lac,
                                gboolean *value_lte_system_info_cid_valid,
                                guint32 *value_lte_system_info_cid,
                                gboolean *value_lte_system_info_registration_reject_info_valid,
                                QmiNasNetworkServiceDomain *value_lte_system_info_registration_reject_domain,
                                guint8 *value_lte_system_info_registration_reject_cause,
                                gboolean *value_lte_system_info_network_id_valid,
                                const gchar **value_lte_system_info_mcc,
                                const gchar **value_lte_system_info_mnc,
                                gboolean *value_lte_system_info_tac_valid,
                                guint16 *value_lte_system_info_tac,
                                GError **error);

qmi_indication_nas_system_info_output_get_lte_system_info is deprecated and should not be used in newly-written code.

Get the 'LTE System Info' field from self .

Parameters

self

a QmiIndicationNasSystemInfoOutput.

 

value_lte_system_info_domain_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_lte_system_info_service_capability_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_service_capability

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_lte_system_info_roaming_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_roaming_status

a placeholder for the output QmiNasRoamingStatus, or NULL if not required.

[out]

value_lte_system_info_forbidden_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_forbidden

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_lac_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_lac

a placeholder for the output guint16, or NULL if not required.

[out]

value_lte_system_info_cid_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_cid

a placeholder for the output guint32, or NULL if not required.

[out]

value_lte_system_info_registration_reject_info_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_registration_reject_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_lte_system_info_registration_reject_cause

a placeholder for the output guint8, or NULL if not required.

[out]

value_lte_system_info_network_id_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_mcc

a placeholder for the output constant string, or NULL if not required.

[out]

value_lte_system_info_mnc

a placeholder for the output constant string, or NULL if not required.

[out]

value_lte_system_info_tac_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_lte_system_info_tac

a placeholder for the output guint16, or NULL if not required.

[out]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.0


qmi_indication_nas_system_info_output_get_td_scma_system_info ()

gboolean
qmi_indication_nas_system_info_output_get_td_scma_system_info
                               (QmiIndicationNasSystemInfoOutput *self,
                                gboolean *value_td_scma_system_info_domain_valid,
                                QmiNasNetworkServiceDomain *value_td_scma_system_info_domain,
                                gboolean *value_td_scma_system_info_service_capability_valid,
                                QmiNasNetworkServiceDomain *value_td_scma_system_info_service_capability,
                                gboolean *value_td_scma_system_info_roaming_status_valid,
                                QmiNasRoamingStatus *value_td_scma_system_info_roaming_status,
                                gboolean *value_td_scma_system_info_forbidden_valid,
                                gboolean *value_td_scma_system_info_forbidden,
                                gboolean *value_td_scma_system_info_lac_valid,
                                guint16 *value_td_scma_system_info_lac,
                                gboolean *value_td_scma_system_info_cid_valid,
                                guint32 *value_td_scma_system_info_cid,
                                gboolean *value_td_scma_system_info_registration_reject_info_valid,
                                QmiNasNetworkServiceDomain *value_td_scma_system_info_registration_reject_domain,
                                guint8 *value_td_scma_system_info_registration_reject_cause,
                                gboolean *value_td_scma_system_info_network_id_valid,
                                const gchar **value_td_scma_system_info_mcc,
                                const gchar **value_td_scma_system_info_mnc,
                                gboolean *value_td_scma_system_info_hs_call_status_valid,
                                QmiNasWcdmaHsService *value_td_scma_system_info_hs_call_status,
                                gboolean *value_td_scma_system_info_hs_service_valid,
                                QmiNasWcdmaHsService *value_td_scma_system_info_hs_service,
                                gboolean *value_td_scma_system_info_cell_parameter_id_valid,
                                guint16 *value_td_scma_system_info_cell_parameter_id,
                                gboolean *value_td_scma_system_info_cell_broadcast_support_valid,
                                QmiNasCellBroadcastCapability *value_td_scma_system_info_cell_broadcast_support,
                                gboolean *value_td_scma_system_info_cs_call_barring_status_valid,
                                QmiNasCallBarringStatus *value_td_scma_system_info_cs_call_barring_status,
                                gboolean *value_td_scma_system_info_ps_call_barring_status_valid,
                                QmiNasCallBarringStatus *value_td_scma_system_info_ps_call_barring_status,
                                gboolean *value_td_scma_system_info_cipher_domain_valid,
                                QmiNasNetworkServiceDomain *value_td_scma_system_info_cipher_domain,
                                GError **error);

qmi_indication_nas_system_info_output_get_td_scma_system_info has been deprecated since version 1.30. and should not be used in newly-written code.

Use qmi_indication_nas_system_info_output_get_td_scma_system_info_v2() instead.

Get the 'TD SCMA System Info' field from self .

Parameters

self

a QmiIndicationNasSystemInfoOutput.

 

value_td_scma_system_info_domain_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_td_scma_system_info_service_capability_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_service_capability

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_td_scma_system_info_roaming_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_roaming_status

a placeholder for the output QmiNasRoamingStatus, or NULL if not required.

[out]

value_td_scma_system_info_forbidden_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_forbidden

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_lac_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_lac

a placeholder for the output guint16, or NULL if not required.

[out]

value_td_scma_system_info_cid_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_cid

a placeholder for the output guint32, or NULL if not required.

[out]

value_td_scma_system_info_registration_reject_info_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_registration_reject_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_td_scma_system_info_registration_reject_cause

a placeholder for the output guint8, or NULL if not required.

[out]

value_td_scma_system_info_network_id_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_mcc

a placeholder for the output constant string, or NULL if not required.

[out]

value_td_scma_system_info_mnc

a placeholder for the output constant string, or NULL if not required.

[out]

value_td_scma_system_info_hs_call_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_hs_call_status

a placeholder for the output QmiNasWcdmaHsService, or NULL if not required.

[out]

value_td_scma_system_info_hs_service_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_hs_service

a placeholder for the output QmiNasWcdmaHsService, or NULL if not required.

[out]

value_td_scma_system_info_cell_parameter_id_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_cell_parameter_id

a placeholder for the output guint16, or NULL if not required.

[out]

value_td_scma_system_info_cell_broadcast_support_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_cell_broadcast_support

a placeholder for the output QmiNasCellBroadcastCapability, or NULL if not required.

[out]

value_td_scma_system_info_cs_call_barring_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_cs_call_barring_status

a placeholder for the output QmiNasCallBarringStatus, or NULL if not required.

[out]

value_td_scma_system_info_ps_call_barring_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_ps_call_barring_status

a placeholder for the output QmiNasCallBarringStatus, or NULL if not required.

[out]

value_td_scma_system_info_cipher_domain_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_td_scma_system_info_cipher_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.0


qmi_indication_nas_system_info_output_get_wcdma_system_info ()

gboolean
qmi_indication_nas_system_info_output_get_wcdma_system_info
                               (QmiIndicationNasSystemInfoOutput *self,
                                gboolean *value_wcdma_system_info_domain_valid,
                                QmiNasNetworkServiceDomain *value_wcdma_system_info_domain,
                                gboolean *value_wcdma_system_info_service_capability_valid,
                                QmiNasNetworkServiceDomain *value_wcdma_system_info_service_capability,
                                gboolean *value_wcdma_system_info_roaming_status_valid,
                                QmiNasRoamingStatus *value_wcdma_system_info_roaming_status,
                                gboolean *value_wcdma_system_info_forbidden_valid,
                                gboolean *value_wcdma_system_info_forbidden,
                                gboolean *value_wcdma_system_info_lac_valid,
                                guint16 *value_wcdma_system_info_lac,
                                gboolean *value_wcdma_system_info_cid_valid,
                                guint32 *value_wcdma_system_info_cid,
                                gboolean *value_wcdma_system_info_registration_reject_info_valid,
                                QmiNasNetworkServiceDomain *value_wcdma_system_info_registration_reject_domain,
                                guint8 *value_wcdma_system_info_registration_reject_cause,
                                gboolean *value_wcdma_system_info_network_id_valid,
                                const gchar **value_wcdma_system_info_mcc,
                                const gchar **value_wcdma_system_info_mnc,
                                gboolean *value_wcdma_system_info_hs_call_status_valid,
                                QmiNasWcdmaHsService *value_wcdma_system_info_hs_call_status,
                                gboolean *value_wcdma_system_info_hs_service_valid,
                                QmiNasWcdmaHsService *value_wcdma_system_info_hs_service,
                                gboolean *value_wcdma_system_info_primary_scrambling_code_valid,
                                guint16 *value_wcdma_system_info_primary_scrambling_code,
                                GError **error);

qmi_indication_nas_system_info_output_get_wcdma_system_info has been deprecated since version 1.30. and should not be used in newly-written code.

Use qmi_indication_nas_system_info_output_get_wcdma_system_info_v2() instead.

Get the 'WCDMA System Info' field from self .

Parameters

self

a QmiIndicationNasSystemInfoOutput.

 

value_wcdma_system_info_domain_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_wcdma_system_info_service_capability_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_service_capability

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_wcdma_system_info_roaming_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_roaming_status

a placeholder for the output QmiNasRoamingStatus, or NULL if not required.

[out]

value_wcdma_system_info_forbidden_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_forbidden

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_lac_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_lac

a placeholder for the output guint16, or NULL if not required.

[out]

value_wcdma_system_info_cid_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_cid

a placeholder for the output guint32, or NULL if not required.

[out]

value_wcdma_system_info_registration_reject_info_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_registration_reject_domain

a placeholder for the output QmiNasNetworkServiceDomain, or NULL if not required.

[out]

value_wcdma_system_info_registration_reject_cause

a placeholder for the output guint8, or NULL if not required.

[out]

value_wcdma_system_info_network_id_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_mcc

a placeholder for the output constant string, or NULL if not required.

[out]

value_wcdma_system_info_mnc

a placeholder for the output constant string, or NULL if not required.

[out]

value_wcdma_system_info_hs_call_status_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_hs_call_status

a placeholder for the output QmiNasWcdmaHsService, or NULL if not required.

[out]

value_wcdma_system_info_hs_service_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_hs_service

a placeholder for the output QmiNasWcdmaHsService, or NULL if not required.

[out]

value_wcdma_system_info_primary_scrambling_code_valid

a placeholder for the output gboolean, or NULL if not required.

[out]

value_wcdma_system_info_primary_scrambling_code

a placeholder for the output guint16, or NULL if not required.

[out]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.0


qmi_message_nas_swi_get_status_output_get_common_info ()

gboolean
qmi_message_nas_swi_get_status_output_get_common_info
                               (QmiMessageNasSwiGetStatusOutput *self,
                                guint8 *value_common_info_temperature,
                                QmiNasSwiModemMode *value_common_info_modem_mode,
                                QmiNasSwiSystemMode *value_common_info_system_mode,
                                QmiNasSwiImsRegState *value_common_info_ims_registration_state,
                                QmiNasSwiPsState *value_common_info_packet_service_state,
                                GError **error);

qmi_message_nas_swi_get_status_output_get_common_info has been deprecated since version 1.30 and should not be used in newly-written code.

Use qmi_message_nas_swi_get_status_output_get_common_info_v2() instead.

Get the 'Common Info' field from self .

Parameters

self

a QmiMessageNasSwiGetStatusOutput.

 

value_common_info_temperature

a placeholder for the output guint8, or NULL if not required.

[out][optional]

value_common_info_modem_mode

a placeholder for the output QmiNasSwiModemMode, or NULL if not required.

[out][optional]

value_common_info_system_mode

a placeholder for the output QmiNasSwiSystemMode, or NULL if not required.

[out][optional]

value_common_info_ims_registration_state

a placeholder for the output QmiNasSwiImsRegState, or NULL if not required.

[out][optional]

value_common_info_packet_service_state

a placeholder for the output QmiNasSwiPsState, or NULL if not required.

[out][optional]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.24


qmi_message_nas_set_system_selection_preference_input_get_mnc_pds_digit_include_status ()

gboolean
qmi_message_nas_set_system_selection_preference_input_get_mnc_pds_digit_include_status
                               (QmiMessageNasSetSystemSelectionPreferenceInput *self,
                                gboolean *value_mnc_pds_digit_include_status,
                                GError **error);

qmi_message_nas_set_system_selection_preference_input_get_mnc_pds_digit_include_status has been deprecated since version 1.30 and should not be used in newly-written code.

Use qmi_message_nas_set_system_selection_preference_input_get_mnc_pcs_digit_include_status() instead.

Get the 'MNC PDS Digit Include Status' field from self .

Parameters

self

a QmiMessageNasSetSystemSelectionPreferenceInput.

 

value_mnc_pds_digit_include_status

a placeholder for the output gboolean, or NULL if not required.

[out][optional]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.0


qmi_indication_uim_slot_status_output_get_slot_eid_information ()

gboolean
qmi_indication_uim_slot_status_output_get_slot_eid_information
                               (QmiIndicationUimSlotStatusOutput *self,
                                GArray **value_slot_eid_information,
                                GError **error);

qmi_indication_uim_slot_status_output_get_slot_eid_information has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_indication_uim_slot_status_output_get_slot_eid() instead.

Get the 'Slot EID Information' field from self .

Parameters

self

a QmiIndicationUimSlotStatusOutput.

 

value_slot_eid_information

a placeholder for the output GArray of GArray * elements, or NULL if not required. Do not free it, it is owned by self .

[out][optional][element-type GArray][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.26


qmi_message_uim_get_slot_status_output_get_slot_eid_information ()

gboolean
qmi_message_uim_get_slot_status_output_get_slot_eid_information
                               (QmiMessageUimGetSlotStatusOutput *self,
                                GArray **value_slot_eid_information,
                                GError **error);

qmi_message_uim_get_slot_status_output_get_slot_eid_information has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_message_uim_get_slot_status_output_get_slot_eid() instead.

Get the 'Slot EID Information' field from self .

Parameters

self

a QmiMessageUimGetSlotStatusOutput.

 

value_slot_eid_information

a placeholder for the output GArray of GArray * elements, or NULL if not required. Do not free it, it is owned by self .

[out][optional][element-type GArray][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.26


qmi_dms_dell_firmware_version_type_get_string ()

const gchar *
qmi_dms_dell_firmware_version_type_get_string
                               (QmiDeprecatedDmsDellFirmwareVersionType val);

qmi_dms_dell_firmware_version_type_get_string has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_dms_foxconn_firmware_version_type_get_string() instead.

Gets the nickname string for the QmiDmsFoxconnFirmwareVersionType specified at val .

Parameters

Returns

a string with the nickname, or NULL if not found. Do not free the returned value.

[transfer none]

Since: 1.22.4


qmi_message_dms_dell_get_firmware_version_input_new ()

QmiDeprecatedMessageDmsDellGetFirmwareVersionInput *
qmi_message_dms_dell_get_firmware_version_input_new
                               (void);

qmi_message_dms_dell_get_firmware_version_input_new has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_get_firmware_version_input_new() instead.

Allocates a new QmiMessageDmsDellGetFirmwareVersionInput.

Returns

the newly created QmiMessageDmsDellGetFirmwareVersionInput. The returned value should be freed with qmi_message_dms_dell_get_firmware_version_input_unref().

Since: 1.22.4


qmi_message_dms_dell_get_firmware_version_input_ref ()

QmiDeprecatedMessageDmsDellGetFirmwareVersionInput *
qmi_message_dms_dell_get_firmware_version_input_ref
                               (QmiDeprecatedMessageDmsDellGetFirmwareVersionInput *self);

qmi_message_dms_dell_get_firmware_version_input_ref has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_get_firmware_version_input_ref() instead.

Atomically increments the reference count of self by one.

Returns

the new reference to self .

Since: 1.22.4


qmi_message_dms_dell_get_firmware_version_input_set_version_type ()

gboolean
qmi_message_dms_dell_get_firmware_version_input_set_version_type
                               (QmiDeprecatedMessageDmsDellGetFirmwareVersionInput *self,
                                QmiDeprecatedDmsDellFirmwareVersionType value_version_type,
                                GError **error);

qmi_message_dms_dell_get_firmware_version_input_set_version_type has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_get_firmware_version_input_set_version_type() instead.

Set the 'Version Type' field in the message.

Parameters

self

a QmiMessageDmsDellGetFirmwareVersionInput.

 

value_version_type

a QmiDmsDellFirmwareVersionType.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

Since: 1.22.4


qmi_message_dms_dell_get_firmware_version_input_get_version_type ()

gboolean
qmi_message_dms_dell_get_firmware_version_input_get_version_type
                               (QmiDeprecatedMessageDmsDellGetFirmwareVersionInput *self,
                                QmiDeprecatedDmsDellFirmwareVersionType *value_version_type,
                                GError **error);

qmi_message_dms_dell_get_firmware_version_input_get_version_type has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_get_firmware_version_input_get_version_type() instead.

Get the 'Version Type' field from self .

Parameters

self

a QmiMessageDmsDellGetFirmwareVersionInput.

 

value_version_type

a placeholder for the output QmiDmsDellFirmwareVersionType, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.22.4


qmi_message_dms_dell_get_firmware_version_input_unref ()

void
qmi_message_dms_dell_get_firmware_version_input_unref
                               (QmiDeprecatedMessageDmsDellGetFirmwareVersionInput *self);

qmi_message_dms_dell_get_firmware_version_input_unref has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_get_firmware_version_input_unref() instead.

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

Since: 1.22.4


qmi_message_dms_dell_get_firmware_version_output_ref ()

QmiDeprecatedMessageDmsDellGetFirmwareVersionOutput *
qmi_message_dms_dell_get_firmware_version_output_ref
                               (QmiDeprecatedMessageDmsDellGetFirmwareVersionOutput *self);

qmi_message_dms_dell_get_firmware_version_output_ref has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_get_firmware_version_output_ref() instead.

Atomically increments the reference count of self by one.

Returns

the new reference to self .

Since: 1.22.4


qmi_message_dms_dell_get_firmware_version_output_unref ()

void
qmi_message_dms_dell_get_firmware_version_output_unref
                               (QmiDeprecatedMessageDmsDellGetFirmwareVersionOutput *self);

qmi_message_dms_dell_get_firmware_version_output_unref has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_get_firmware_version_output_unref() instead.

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

Since: 1.22.4


qmi_message_dms_dell_get_firmware_version_output_get_result ()

gboolean
qmi_message_dms_dell_get_firmware_version_output_get_result
                               (QmiDeprecatedMessageDmsDellGetFirmwareVersionOutput *self,
                                GError **error);

qmi_message_dms_dell_get_firmware_version_output_get_result has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_get_firmware_version_output_get_result() instead.

Get the result of the QMI operation.

Parameters

self

a QmiMessageDmsDellGetFirmwareVersionOutput.

 

error

Return location for error or NULL.

 

Returns

TRUE if the QMI operation succeeded, FALSE if error is set.

Since: 1.22.4


qmi_message_dms_dell_get_firmware_version_output_get_version ()

gboolean
qmi_message_dms_dell_get_firmware_version_output_get_version
                               (QmiDeprecatedMessageDmsDellGetFirmwareVersionOutput *self,
                                const gchar **value_version,
                                GError **error);

qmi_message_dms_dell_get_firmware_version_output_get_version has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_get_firmware_version_output_get_version() instead.

Get the 'Version' field from self .

Parameters

self

a QmiMessageDmsDellGetFirmwareVersionOutput.

 

value_version

a placeholder for the output constant string, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.22.4


qmi_client_dms_dell_get_firmware_version ()

void
qmi_client_dms_dell_get_firmware_version
                               (QmiClientDms *self,
                                QmiDeprecatedMessageDmsDellGetFirmwareVersionInput *input,
                                guint timeout,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

qmi_client_dms_dell_get_firmware_version has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_client_dms_foxconn_get_firmware_version() instead.

Asynchronously sends a Dell Get Firmware Version request to the device.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.

You can then call qmi_client_dms_dell_get_firmware_version_finish() to get the result of the operation.

Parameters

self

a QmiClientDms.

 

input

a QmiMessageDmsDellGetFirmwareVersionInput.

 

timeout

maximum time to wait for the method to complete, in seconds.

 

cancellable

a GCancellable or NULL.

 

callback

a GAsyncReadyCallback to call when the request is satisfied.

 

user_data

user data to pass to callback .

 

Since: 1.22.4


qmi_client_dms_dell_get_firmware_version_finish ()

QmiDeprecatedMessageDmsDellGetFirmwareVersionOutput *
qmi_client_dms_dell_get_firmware_version_finish
                               (QmiClientDms *self,
                                GAsyncResult *res,
                                GError **error);

qmi_client_dms_dell_get_firmware_version_finish has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_client_dms_foxconn_get_firmware_version_finish() instead.

Finishes an async operation started with qmi_client_dms_dell_get_firmware_version().

Parameters

self

a QmiClientDms.

 

res

the GAsyncResult obtained from the GAsyncReadyCallback passed to qmi_client_dms_dell_get_firmware_version().

 

error

Return location for error or NULL.

 

Returns

a QmiMessageDmsDellGetFirmwareVersionOutput, or NULL if error is set. The returned value should be freed with qmi_message_dms_dell_get_firmware_version_output_unref().

Since: 1.22.4


qmi_dms_dell_device_mode_get_string ()

const gchar *
qmi_dms_dell_device_mode_get_string (QmiDeprecatedDmsDellDeviceMode val);

qmi_dms_dell_device_mode_get_string has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_dms_foxconn_device_mode_get_string() instead.

Gets the nickname string for the QmiDmsDellDeviceMode specified at val .

Parameters

val

a QmiDmsDellDeviceMode.

 

Returns

a string with the nickname, or NULL if not found. Do not free the returned value.

[transfer none]

Since: 1.22.4


qmi_message_dms_dell_change_device_mode_input_new ()

QmiDeprecatedMessageDmsDellChangeDeviceModeInput *
qmi_message_dms_dell_change_device_mode_input_new
                               (void);

qmi_message_dms_dell_change_device_mode_input_new has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_change_device_mode_input_new() instead.

Allocates a new QmiMessageDmsDellChangeDeviceModeInput.

Returns

the newly created QmiMessageDmsDellChangeDeviceModeInput. The returned value should be freed with qmi_message_dms_dell_change_device_mode_input_unref().

Since: 1.22.4


qmi_message_dms_dell_change_device_mode_input_ref ()

QmiDeprecatedMessageDmsDellChangeDeviceModeInput *
qmi_message_dms_dell_change_device_mode_input_ref
                               (QmiDeprecatedMessageDmsDellChangeDeviceModeInput *self);

qmi_message_dms_dell_change_device_mode_input_ref has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_change_device_mode_input_ref() instead.

Atomically increments the reference count of self by one.

Returns

the new reference to self .

Since: 1.22.4


qmi_message_dms_dell_change_device_mode_input_set_mode ()

gboolean
qmi_message_dms_dell_change_device_mode_input_set_mode
                               (QmiDeprecatedMessageDmsDellChangeDeviceModeInput *self,
                                QmiDeprecatedDmsDellDeviceMode value_mode,
                                GError **error);

qmi_message_dms_dell_change_device_mode_input_set_mode has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_change_device_mode_input_set_mode() instead.

Set the 'Mode' field in the message.

Parameters

self

a QmiMessageDmsDellChangeDeviceModeInput.

 

value_mode

a QmiDmsDellDeviceMode.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

Since: 1.22.4


qmi_message_dms_dell_change_device_mode_input_get_mode ()

gboolean
qmi_message_dms_dell_change_device_mode_input_get_mode
                               (QmiDeprecatedMessageDmsDellChangeDeviceModeInput *self,
                                QmiDeprecatedDmsDellDeviceMode *value_mode,
                                GError **error);

qmi_message_dms_dell_change_device_mode_input_get_mode has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_change_device_mode_input_get_mode() instead.

Get the 'Mode' field from self .

Parameters

self

a QmiMessageDmsDellChangeDeviceModeInput.

 

value_mode

a placeholder for the output QmiDmsDellDeviceMode, or NULL if not required.

 

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

Since: 1.22.4


qmi_message_dms_dell_change_device_mode_input_unref ()

void
qmi_message_dms_dell_change_device_mode_input_unref
                               (QmiDeprecatedMessageDmsDellChangeDeviceModeInput *self);

qmi_message_dms_dell_change_device_mode_input_unref has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_change_device_mode_input_unref() instead.

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

Since: 1.22.4


qmi_message_dms_dell_change_device_mode_output_ref ()

QmiDeprecatedMessageDmsDellChangeDeviceModeOutput *
qmi_message_dms_dell_change_device_mode_output_ref
                               (QmiDeprecatedMessageDmsDellChangeDeviceModeOutput *self);

qmi_message_dms_dell_change_device_mode_output_ref has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_change_device_mode_output_ref() instead.

Atomically increments the reference count of self by one.

Returns

the new reference to self .

Since: 1.22.4


qmi_message_dms_dell_change_device_mode_output_unref ()

void
qmi_message_dms_dell_change_device_mode_output_unref
                               (QmiDeprecatedMessageDmsDellChangeDeviceModeOutput *self);

qmi_message_dms_dell_change_device_mode_output_unref has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_change_device_mode_output_unref() instead.

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

Since: 1.22.4


qmi_message_dms_dell_change_device_mode_output_get_result ()

gboolean
qmi_message_dms_dell_change_device_mode_output_get_result
                               (QmiDeprecatedMessageDmsDellChangeDeviceModeOutput *self,
                                GError **error);

qmi_message_dms_dell_change_device_mode_output_get_result has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_message_dms_foxconn_change_device_mode_output_get_result() instead.

Get the result of the QMI operation.

Parameters

self

a QmiMessageDmsDellChangeDeviceModeOutput.

 

error

Return location for error or NULL.

 

Returns

TRUE if the QMI operation succeeded, FALSE if error is set.

Since: 1.22.4


qmi_client_dms_dell_change_device_mode ()

void
qmi_client_dms_dell_change_device_mode
                               (QmiClientDms *self,
                                QmiDeprecatedMessageDmsDellChangeDeviceModeInput *input,
                                guint timeout,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

qmi_client_dms_dell_change_device_mode has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_client_dms_foxconn_change_device_mode() instead.

Asynchronously sends a Dell Change Device Mode request to the device.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.

You can then call qmi_client_dms_dell_change_device_mode_finish() to get the result of the operation.

Parameters

self

a QmiClientDms.

 

input

a QmiMessageDmsDellChangeDeviceModeInput.

 

timeout

maximum time to wait for the method to complete, in seconds.

 

cancellable

a GCancellable or NULL.

 

callback

a GAsyncReadyCallback to call when the request is satisfied.

 

user_data

user data to pass to callback .

 

Since: 1.22.4


qmi_client_dms_dell_change_device_mode_finish ()

QmiDeprecatedMessageDmsDellChangeDeviceModeOutput *
qmi_client_dms_dell_change_device_mode_finish
                               (QmiClientDms *self,
                                GAsyncResult *res,
                                GError **error);

qmi_client_dms_dell_change_device_mode_finish has been deprecated since version 1.26 and should not be used in newly-written code.

Use qmi_client_dms_foxconn_change_device_mode_finish() instead.

Finishes an async operation started with qmi_client_dms_dell_change_device_mode().

Parameters

self

a QmiClientDms.

 

res

the GAsyncResult obtained from the GAsyncReadyCallback passed to qmi_client_dms_dell_change_device_mode().

 

error

Return location for error or NULL.

 

Returns

a QmiMessageDmsDellChangeDeviceModeOutput, or NULL if error is set. The returned value should be freed with qmi_message_dms_dell_change_device_mode_output_unref().

Since: 1.22.4


qmi_client_wds_get_default_profile_num ()

void
qmi_client_wds_get_default_profile_num
                               (QmiClientWds *self,
                                QmiDeprecatedMessageWdsGetDefaultProfileNumInput *input,
                                guint timeout,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

qmi_client_wds_get_default_profile_num has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_client_wds_get_default_profile_number() instead.

Asynchronously sends a Get Default Profile Number request to the device.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.

You can then call qmi_client_wds_get_default_profile_number_finish() to get the result of the operation.

Parameters

self

a QmiClientWds.

 

input

a QmiMessageWdsGetDefaultProfileNumberInput.

 

timeout

maximum time to wait for the method to complete, in seconds.

 

cancellable

a GCancellable or NULL.

 

callback

a GAsyncReadyCallback to call when the request is satisfied.

 

user_data

user data to pass to callback .

 

Since: 1.22


qmi_client_wds_get_default_profile_num_finish ()

QmiDeprecatedMessageWdsGetDefaultProfileNumOutput *
qmi_client_wds_get_default_profile_num_finish
                               (QmiClientWds *self,
                                GAsyncResult *res,
                                GError **error);

qmi_client_wds_get_default_profile_num_finish has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_client_wds_get_default_profile_number_finish() instead.

Finishes an async operation started with qmi_client_wds_get_default_profile_number().

Parameters

self

a QmiClientWds.

 

res

the GAsyncResult obtained from the GAsyncReadyCallback passed to qmi_client_wds_get_default_profile_number().

 

error

Return location for error or NULL.

 

Returns

a QmiMessageWdsGetDefaultProfileNumberOutput, or NULL if error is set. The returned value should be freed with qmi_message_wds_get_default_profile_number_output_unref().

Since: 1.22


qmi_message_wds_get_default_profile_num_input_new ()

QmiDeprecatedMessageWdsGetDefaultProfileNumInput *
qmi_message_wds_get_default_profile_num_input_new
                               (void);

qmi_message_wds_get_default_profile_num_input_new has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_get_default_profile_number_input_new() instead.

Allocates a new QmiMessageWdsGetDefaultProfileNumInput.

Returns

the newly created QmiMessageWdsGetDefaultProfileNumInput. The returned value should be freed with qmi_message_wds_get_default_profile_num_input_unref().

Since: 1.22


qmi_message_wds_get_default_profile_num_input_ref ()

QmiDeprecatedMessageWdsGetDefaultProfileNumInput *
qmi_message_wds_get_default_profile_num_input_ref
                               (QmiDeprecatedMessageWdsGetDefaultProfileNumInput *self);

qmi_message_wds_get_default_profile_num_input_ref has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_get_default_profile_number_input_ref() instead.

Atomically increments the reference count of self by one.

Returns

the new reference to self .

Since: 1.22


qmi_message_wds_get_default_profile_num_input_get_profile_type ()

gboolean
qmi_message_wds_get_default_profile_num_input_get_profile_type
                               (QmiDeprecatedMessageWdsGetDefaultProfileNumInput *self,
                                QmiWdsProfileType *value_profile_type_profile_type,
                                QmiWdsProfileFamily *value_profile_type_profile_family,
                                GError **error);

qmi_message_wds_get_default_profile_num_input_get_profile_type has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_get_default_profile_number_input_get_profile_type() instead.

Get the 'Profile Type' field from self .

Parameters

self

a QmiMessageWdsGetDefaultProfileNumInput.

 

value_profile_type_profile_type

a placeholder for the output QmiWdsProfileType, or NULL if not required.

[out]

value_profile_type_profile_family

a placeholder for the output QmiWdsProfileFamily, or NULL if not required.

[out]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.22


qmi_message_wds_get_default_profile_num_input_set_profile_type ()

gboolean
qmi_message_wds_get_default_profile_num_input_set_profile_type
                               (QmiDeprecatedMessageWdsGetDefaultProfileNumInput *self,
                                QmiWdsProfileType value_profile_type_profile_type,
                                QmiWdsProfileFamily value_profile_type_profile_family,
                                GError **error);

qmi_message_wds_get_default_profile_num_input_set_profile_type has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_get_default_profile_number_input_set_profile_type() instead.

Set the 'Profile Type' field in the message.

Parameters

self

a QmiMessageWdsGetDefaultProfileNumInput.

 

value_profile_type_profile_type

a QmiWdsProfileType.

 

value_profile_type_profile_family

a QmiWdsProfileFamily.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

[skip]

Since: 1.22


qmi_message_wds_get_default_profile_num_input_unref ()

void
qmi_message_wds_get_default_profile_num_input_unref
                               (QmiDeprecatedMessageWdsGetDefaultProfileNumInput *self);

qmi_message_wds_get_default_profile_num_input_unref has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_get_default_profile_number_input_unref() instead.

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

Since: 1.22


qmi_message_wds_get_default_profile_num_output_ref ()

QmiDeprecatedMessageWdsGetDefaultProfileNumOutput *
qmi_message_wds_get_default_profile_num_output_ref
                               (QmiDeprecatedMessageWdsGetDefaultProfileNumOutput *self);

qmi_message_wds_get_default_profile_num_output_ref has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_get_default_profile_number_output_ref() instead.

Atomically increments the reference count of self by one.

Returns

the new reference to self .

Since: 1.22


qmi_message_wds_get_default_profile_num_output_unref ()

void
qmi_message_wds_get_default_profile_num_output_unref
                               (QmiDeprecatedMessageWdsGetDefaultProfileNumOutput *self);

qmi_message_wds_get_default_profile_num_output_unref has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_get_default_profile_number_output_unref() instead.

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

Since: 1.22


qmi_message_wds_get_default_profile_num_output_get_default_profile_number ()

gboolean
qmi_message_wds_get_default_profile_num_output_get_default_profile_number
                               (QmiDeprecatedMessageWdsGetDefaultProfileNumOutput *self,
                                guint8 *value_default_profile_number,
                                GError **error);

qmi_message_wds_get_default_profile_num_output_get_default_profile_number has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_get_default_profile_number_output_get_index() instead.

Get the 'Default Profile Number' field from self .

Parameters

self

a QmiMessageWdsGetDefaultProfileNumOutput.

 

value_default_profile_number

a placeholder for the output guint8, or NULL if not required.

[out]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.22


qmi_message_wds_get_default_profile_num_output_get_extended_error_code ()

gboolean
qmi_message_wds_get_default_profile_num_output_get_extended_error_code
                               (QmiDeprecatedMessageWdsGetDefaultProfileNumOutput *self,
                                QmiWdsDsProfileError *value_extended_error_code,
                                GError **error);

qmi_message_wds_get_default_profile_num_output_get_extended_error_code has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_get_default_profile_number_output_get_extended_error_code() instead.

Get the 'Extended Error Code' field from self .

Parameters

self

a QmiMessageWdsGetDefaultProfileNumOutput.

 

value_extended_error_code

a placeholder for the output QmiWdsDsProfileError, or NULL if not required.

[out]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.22


qmi_message_wds_get_default_profile_num_output_get_result ()

gboolean
qmi_message_wds_get_default_profile_num_output_get_result
                               (QmiDeprecatedMessageWdsGetDefaultProfileNumOutput *self,
                                GError **error);

qmi_message_wds_get_default_profile_num_output_get_result has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_get_default_profile_number_output_get_result() instead.

Get the result of the QMI operation.

Parameters

self

a QmiMessageWdsGetDefaultProfileNumOutput.

 

error

Return location for error or NULL.

 

Returns

TRUE if the QMI operation succeeded, FALSE if error is set.

[skip]

Since: 1.22


qmi_client_wds_set_default_profile_num ()

void
qmi_client_wds_set_default_profile_num
                               (QmiClientWds *self,
                                QmiDeprecatedMessageWdsSetDefaultProfileNumInput *input,
                                guint timeout,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

qmi_client_wds_set_default_profile_num has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_client_wds_set_default_profile_number() instead.

Asynchronously sends a Set Default Profile Number request to the device.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.

You can then call qmi_client_wds_set_default_profile_number_finish() to get the result of the operation.

Parameters

self

a QmiClientWds.

 

input

a QmiMessageWdsSetDefaultProfileNumberInput.

 

timeout

maximum time to wait for the method to complete, in seconds.

 

cancellable

a GCancellable or NULL.

 

callback

a GAsyncReadyCallback to call when the request is satisfied.

 

user_data

user data to pass to callback .

 

Since: 1.22


qmi_client_wds_set_default_profile_num_finish ()

QmiDeprecatedMessageWdsSetDefaultProfileNumOutput *
qmi_client_wds_set_default_profile_num_finish
                               (QmiClientWds *self,
                                GAsyncResult *res,
                                GError **error);

qmi_client_wds_set_default_profile_num_finish has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_client_wds_set_default_profile_number_finish() instead.

Finishes an async operation started with qmi_client_wds_set_default_profile_number().

Parameters

self

a QmiClientWds.

 

res

the GAsyncResult obtained from the GAsyncReadyCallback passed to qmi_client_wds_set_default_profile_number().

 

error

Return location for error or NULL.

 

Returns

a QmiMessageWdsSetDefaultProfileNumberOutput, or NULL if error is set. The returned value should be freed with qmi_message_wds_set_default_profile_number_output_unref().

Since: 1.22


qmi_message_wds_set_default_profile_num_input_new ()

QmiDeprecatedMessageWdsSetDefaultProfileNumInput *
qmi_message_wds_set_default_profile_num_input_new
                               (void);

qmi_message_wds_set_default_profile_num_input_new has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_set_default_profile_number_input_new() instead.

Allocates a new QmiMessageWdsSetDefaultProfileNumInput.

Returns

the newly created QmiMessageWdsSetDefaultProfileNumInput. The returned value should be freed with qmi_message_wds_set_default_profile_num_input_unref().

Since: 1.22


qmi_message_wds_set_default_profile_num_input_ref ()

QmiDeprecatedMessageWdsSetDefaultProfileNumInput *
qmi_message_wds_set_default_profile_num_input_ref
                               (QmiDeprecatedMessageWdsSetDefaultProfileNumInput *self);

qmi_message_wds_set_default_profile_num_input_ref has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_set_default_profile_number_input_ref() instead.

Atomically increments the reference count of self by one.

Returns

the new reference to self .

Since: 1.22


qmi_message_wds_set_default_profile_num_input_get_profile_identifier ()

gboolean
qmi_message_wds_set_default_profile_num_input_get_profile_identifier
                               (QmiDeprecatedMessageWdsSetDefaultProfileNumInput *self,
                                QmiWdsProfileType *value_profile_identifier_profile_type,
                                QmiWdsProfileFamily *value_profile_identifier_profile_family,
                                guint8 *value_profile_identifier_profile_index,
                                GError **error);

qmi_message_wds_set_default_profile_num_input_get_profile_identifier has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_set_default_profile_number_input_get_profile_identifier() instead.

Get the 'Profile Identifier' field from self .

Parameters

self

a QmiMessageWdsSetDefaultProfileNumInput.

 

value_profile_identifier_profile_type

a placeholder for the output QmiWdsProfileType, or NULL if not required.

[out]

value_profile_identifier_profile_family

a placeholder for the output QmiWdsProfileFamily, or NULL if not required.

[out]

value_profile_identifier_profile_index

a placeholder for the output guint8, or NULL if not required.

[out]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.22


qmi_message_wds_set_default_profile_num_input_set_profile_identifier ()

gboolean
qmi_message_wds_set_default_profile_num_input_set_profile_identifier
                               (QmiDeprecatedMessageWdsSetDefaultProfileNumInput *self,
                                QmiWdsProfileType value_profile_identifier_profile_type,
                                QmiWdsProfileFamily value_profile_identifier_profile_family,
                                guint8 value_profile_identifier_profile_index,
                                GError **error);

qmi_message_wds_set_default_profile_num_input_set_profile_identifier has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_set_default_profile_number_input_set_profile_identifier() instead.

Set the 'Profile Identifier' field in the message.

Parameters

self

a QmiMessageWdsSetDefaultProfileNumInput.

 

value_profile_identifier_profile_type

a QmiWdsProfileType.

 

value_profile_identifier_profile_family

a QmiWdsProfileFamily.

 

value_profile_identifier_profile_index

a guint8.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

[skip]

Since: 1.22


qmi_message_wds_set_default_profile_num_input_unref ()

void
qmi_message_wds_set_default_profile_num_input_unref
                               (QmiDeprecatedMessageWdsSetDefaultProfileNumInput *self);

qmi_message_wds_set_default_profile_num_input_unref has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_set_default_profile_number_input_unref() instead.

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

Since: 1.22


qmi_message_wds_set_default_profile_num_output_get_extended_error_code ()

gboolean
qmi_message_wds_set_default_profile_num_output_get_extended_error_code
                               (QmiDeprecatedMessageWdsSetDefaultProfileNumOutput *self,
                                QmiWdsDsProfileError *value_extended_error_code,
                                GError **error);

qmi_message_wds_set_default_profile_num_output_get_extended_error_code has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_set_default_profile_number_output_get_extended_error_code() instead.

Get the 'Extended Error Code' field from self .

Parameters

self

a QmiMessageWdsSetDefaultProfileNumOutput.

 

value_extended_error_code

a placeholder for the output QmiWdsDsProfileError, or NULL if not required.

[out]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.22


qmi_message_wds_set_default_profile_num_output_get_result ()

gboolean
qmi_message_wds_set_default_profile_num_output_get_result
                               (QmiDeprecatedMessageWdsSetDefaultProfileNumOutput *self,
                                GError **error);

qmi_message_wds_set_default_profile_num_output_get_result has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_set_default_profile_number_output_get_result() instead.

Get the result of the QMI operation.

Parameters

self

a QmiMessageWdsSetDefaultProfileNumOutput.

 

error

Return location for error or NULL.

 

Returns

TRUE if the QMI operation succeeded, FALSE if error is set.

[skip]

Since: 1.22


qmi_message_wds_set_default_profile_num_output_ref ()

QmiDeprecatedMessageWdsSetDefaultProfileNumOutput *
qmi_message_wds_set_default_profile_num_output_ref
                               (QmiDeprecatedMessageWdsSetDefaultProfileNumOutput *self);

qmi_message_wds_set_default_profile_num_output_ref has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_set_default_profile_number_output_ref() instead.

Atomically increments the reference count of self by one.

Returns

the new reference to self .

Since: 1.22


qmi_message_wds_set_default_profile_num_output_unref ()

void
qmi_message_wds_set_default_profile_num_output_unref
                               (QmiDeprecatedMessageWdsSetDefaultProfileNumOutput *self);

qmi_message_wds_set_default_profile_num_output_unref has been deprecated since version 1.28. and should not be used in newly-written code.

Use qmi_message_wds_set_default_profile_number_output_unref() instead.

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

Since: 1.22


qmi_message_pdc_config_change_input_get_type_with_id ()

gboolean
qmi_message_pdc_config_change_input_get_type_with_id
                               (QmiMessagePdcConfigChangeInput *self,
                                QmiDeprecatedConfigTypeAndId *value_type_with_id,
                                GError **error);

qmi_message_pdc_config_change_input_get_type_with_id has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_message_pdc_config_change_input_get_type_with_id_v2() instead.

Get the 'Type With Id' field from self .

Parameters

self

a QmiMessagePdcConfigChangeInput.

 

value_type_with_id

a placeholder for the output constant QmiConfigTypeAndId, or NULL if not required.

[out][optional][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.18


qmi_message_pdc_config_change_input_set_type_with_id ()

gboolean
qmi_message_pdc_config_change_input_set_type_with_id
                               (QmiMessagePdcConfigChangeInput *self,
                                const QmiDeprecatedConfigTypeAndId *value_type_with_id,
                                GError **error);

qmi_message_pdc_config_change_input_set_type_with_id has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_message_pdc_config_change_input_set_type_with_id_v2() instead.

Set the 'Type With Id' field in the message.

Parameters

self

a QmiMessagePdcConfigChangeInput.

 

value_type_with_id

the address of the QmiConfigTypeAndId to set.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

[skip]

Since: 1.18


qmi_message_pdc_config_change_output_get_type_with_id ()

gboolean
qmi_message_pdc_config_change_output_get_type_with_id
                               (QmiMessagePdcConfigChangeOutput *self,
                                QmiDeprecatedConfigTypeAndId *value_type_with_id,
                                GError **error);

qmi_message_pdc_config_change_output_get_type_with_id has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_message_pdc_config_change_output_get_type_with_id_v2() instead.

Get the 'Type With Id' field from self .

Parameters

self

a QmiMessagePdcConfigChangeOutput.

 

value_type_with_id

a placeholder for the output constant QmiConfigTypeAndId, or NULL if not required.

[out][optional][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.18


qmi_message_pdc_set_selected_config_input_get_type_with_id ()

gboolean
qmi_message_pdc_set_selected_config_input_get_type_with_id
                               (QmiMessagePdcSetSelectedConfigInput *self,
                                QmiDeprecatedConfigTypeAndId *value_type_with_id,
                                GError **error);

qmi_message_pdc_set_selected_config_input_get_type_with_id has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_message_pdc_set_selected_config_input_get_type_with_id_v2() instead.

Get the 'Type With Id' field from self .

Parameters

self

a QmiMessagePdcSetSelectedConfigInput.

 

value_type_with_id

a placeholder for the output constant QmiConfigTypeAndId, or NULL if not required.

[out][optional][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.18


qmi_message_pdc_set_selected_config_input_set_type_with_id ()

gboolean
qmi_message_pdc_set_selected_config_input_set_type_with_id
                               (QmiMessagePdcSetSelectedConfigInput *self,
                                const QmiDeprecatedConfigTypeAndId *value_type_with_id,
                                GError **error);

qmi_message_pdc_set_selected_config_input_set_type_with_id has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_message_pdc_set_selected_config_input_set_type_with_id() instead.

Set the 'Type With Id' field in the message.

Parameters

self

a QmiMessagePdcSetSelectedConfigInput.

 

value_type_with_id

the address of the QmiConfigTypeAndId to set.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

[skip]

Since: 1.18


qmi_message_pdc_get_config_info_input_get_type_with_id ()

gboolean
qmi_message_pdc_get_config_info_input_get_type_with_id
                               (QmiMessagePdcGetConfigInfoInput *self,
                                QmiDeprecatedConfigTypeAndId *value_type_with_id,
                                GError **error);

qmi_message_pdc_get_config_info_input_get_type_with_id has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_message_pdc_get_config_info_input_get_type_with_id_v2() instead.

Get the 'Type With Id' field from self .

Parameters

self

a QmiMessagePdcGetConfigInfoInput.

 

value_type_with_id

a placeholder for the output constant QmiConfigTypeAndId, or NULL if not required.

[out][optional][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.18


qmi_message_pdc_get_config_info_input_set_type_with_id ()

gboolean
qmi_message_pdc_get_config_info_input_set_type_with_id
                               (QmiMessagePdcGetConfigInfoInput *self,
                                const QmiDeprecatedConfigTypeAndId *value_type_with_id,
                                GError **error);

qmi_message_pdc_get_config_info_input_set_type_with_id has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_message_pdc_get_config_info_input_set_type_with_id_v2() instead.

Set the 'Type With Id' field in the message.

Parameters

self

a QmiMessagePdcGetConfigInfoInput.

 

value_type_with_id

the address of the QmiConfigTypeAndId to set.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

[skip]

Since: 1.18


qmi_message_dms_delete_stored_image_input_get_image ()

gboolean
qmi_message_dms_delete_stored_image_input_get_image
                               (QmiMessageDmsDeleteStoredImageInput *self,
                                QmiDeprecatedMessageDmsDeleteStoredImageInputImage *value_image,
                                GError **error);

qmi_message_dms_delete_stored_image_input_get_image has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_message_dms_delete_stored_image_input_set_image_details() instead.

Get the 'Image' field from self .

Parameters

self

a QmiMessageDmsDeleteStoredImageInput.

 

value_image

a placeholder for the output constant QmiMessageDmsDeleteStoredImageInputImage, or NULL if not required.

[out][optional][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.0


qmi_message_dms_delete_stored_image_input_set_image ()

gboolean
qmi_message_dms_delete_stored_image_input_set_image
                               (QmiMessageDmsDeleteStoredImageInput *self,
                                const QmiDeprecatedMessageDmsDeleteStoredImageInputImage *value_image,
                                GError **error);

qmi_message_dms_delete_stored_image_input_set_image has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_message_dms_delete_stored_image_input_set_image_details() instead.

Set the 'Image' field in the message.

Parameters

self

a QmiMessageDmsDeleteStoredImageInput.

 

value_image

the address of the QmiMessageDmsDeleteStoredImageInputImage to set.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

[skip]

Since: 1.0


qmi_message_dms_get_stored_image_info_input_get_image ()

gboolean
qmi_message_dms_get_stored_image_info_input_get_image
                               (QmiMessageDmsGetStoredImageInfoInput *self,
                                QmiDeprecatedMessageDmsGetStoredImageInfoInputImage *value_image,
                                GError **error);

qmi_message_dms_get_stored_image_info_input_get_image has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_message_dms_get_stored_image_info_input_get_image_details() instead.

Get the 'Image' field from self .

Parameters

self

a QmiMessageDmsGetStoredImageInfoInput.

 

value_image

a placeholder for the output constant QmiMessageDmsGetStoredImageInfoInputImage, or NULL if not required.

[out][optional][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.0


qmi_message_dms_get_stored_image_info_input_set_image ()

gboolean
qmi_message_dms_get_stored_image_info_input_set_image
                               (QmiMessageDmsGetStoredImageInfoInput *self,
                                const QmiDeprecatedMessageDmsGetStoredImageInfoInputImage *value_image,
                                GError **error);

qmi_message_dms_get_stored_image_info_input_set_image has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_message_dms_get_stored_image_info_input_set_image_details() instead.

Set the 'Image' field in the message.

Parameters

self

a QmiMessageDmsGetStoredImageInfoInput.

 

value_image

the address of the QmiMessageDmsGetStoredImageInfoInputImage to set.

 

error

Return location for error or NULL.

 

Returns

TRUE if value was successfully set, FALSE otherwise.

[skip]

Since: 1.0


qmi_indication_loc_position_report_output_get_dilution_of_precision ()

gboolean
qmi_indication_loc_position_report_output_get_dilution_of_precision
                               (QmiIndicationLocPositionReportOutput *self,
                                QmiDeprecatedIndicationLocPositionReportOutputDilutionOfPrecision *value_dilution_of_precision,
                                GError **error);

qmi_indication_loc_position_report_output_get_dilution_of_precision has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_indication_loc_position_report_output_get_dop() instead.

Get the 'Dilution of Precision' field from self .

Parameters

self

a QmiIndicationLocPositionReportOutput.

 

value_dilution_of_precision

a placeholder for the output constant QmiIndicationLocPositionReportOutputDilutionOfPrecision, or NULL if not required.

[out][optional][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.22


qmi_indication_loc_position_report_output_get_gps_time ()

gboolean
qmi_indication_loc_position_report_output_get_gps_time
                               (QmiIndicationLocPositionReportOutput *self,
                                QmiDeprecatedIndicationLocPositionReportOutputGpsTime *value_gps_time,
                                GError **error);

qmi_indication_loc_position_report_output_get_gps_time has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_indication_loc_position_report_output_get_gps_date_time() instead.

Get the 'GPS Time' field from self .

Parameters

self

a QmiIndicationLocPositionReportOutput.

 

value_gps_time

a placeholder for the output constant QmiIndicationLocPositionReportOutputGpsTime, or NULL if not required.

[out][optional][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.22


qmi_message_uim_get_configuration_output_get_personalization_status_other_slots ()

gboolean
qmi_message_uim_get_configuration_output_get_personalization_status_other_slots
                               (QmiMessageUimGetConfigurationOutput *self,
                                GArray **value_personalization_status_other_slots,
                                GError **error);

qmi_message_uim_get_configuration_output_get_personalization_status_other_slots has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_message_uim_get_configuration_output_get_personalization_status_other() instead.

Get the 'Personalization Status Other Slots' field from self .

Parameters

self

a QmiMessageUimGetConfigurationOutput.

 

value_personalization_status_other_slots

a placeholder for the output GArray of GArray * elements, or NULL if not required. Do not free it, it is owned by self .

[out][optional][element-type GArray][transfer none]

error

Return location for error or NULL.

 

Returns

TRUE if the field is found, FALSE otherwise.

[skip]

Since: 1.30


qmi_wds_get_current_settings_requested_settings_build_string_from_mask ()

gchar *
qmi_wds_get_current_settings_requested_settings_build_string_from_mask
                               (QmiDeprecatedWdsGetCurrentSettingsRequestedSettings mask);

qmi_wds_get_current_settings_requested_settings_build_string_from_mask has been deprecated since version 1.32 and should not be used in newly-written code.

Use qmi_wds_requested_settings_build_string_from_mask() instead.

Builds a string containing a comma-separated list of nicknames for each QmiWdsGetCurrentSettingsRequestedSettings in mask .

Parameters

mask

bitmask of QmiWdsGetCurrentSettingsRequestedSettings values.

 

Returns

a string with the list of nicknames, or NULL if none given. The returned value should be freed with g_free().

[transfer full]

Since: 1.0

Types and Values

QmiMessageNasGetCellLocationInfoOutputGeranInfoCellElement

typedef struct {
    guint32 cell_id;
    gchar *plmn;
    guint16 lac;
    guint16 geran_absolute_rf_channel_number;
    guint8 base_station_identity_code;
    guint16 rx_level;
} QmiMessageNasGetCellLocationInfoOutputGeranInfoCellElement;

QmiMessageNasGetCellLocationInfoOutputGeranInfoCellElement has been deprecated since version 1.26.6. and should not be used in newly-written code.

GERAN info cell.

This type is deprecated and returns always an empty plmn string.

Members

guint32 cell_id;

a guint32.

 

gchar *plmn;

a string of exactly 3 characters.

 

guint16 lac;

a guint16.

 

guint16 geran_absolute_rf_channel_number;

a guint16.

 

guint8 base_station_identity_code;

a guint8.

 

guint16 rx_level;

a guint16.

 

Since: 1.10


QmiMessageNasGetCellLocationInfoOutputUmtsInfoCellElement

typedef QmiMessageNasGetCellLocationInfoOutputUmtsInfoV2CellElement QmiMessageNasGetCellLocationInfoOutputUmtsInfoCellElement;

QmiMessageNasGetCellLocationInfoOutputUmtsInfoCellElement has been deprecated since version 1.26.6. and should not be used in newly-written code.

Use QmiMessageNasGetCellLocationInfoOutputUmtsInfoV2CellElement instead.

UMTS info cell.

The format of this deprecated type is really the same as for the new QmiMessageNasGetCellLocationInfoOutputUmtsInfoV2CellElement type, it is only a name change.

Since: 1.10


QmiMessageNasGetCellLocationInfoOutputUmtsInfoNeighboringGeranElement

typedef QmiMessageNasGetCellLocationInfoOutputUmtsInfoV2NeighboringGeranElement QmiMessageNasGetCellLocationInfoOutputUmtsInfoNeighboringGeranElement;

QmiMessageNasGetCellLocationInfoOutputUmtsInfoNeighboringGeranElement has been deprecated since version 1.26.6. and should not be used in newly-written code.

Use QmiMessageNasGetCellLocationInfoOutputUmtsInfoV2NeighboringGeranElement instead.

UMTS info neighboring GERAN cell.

The format of this deprecated type is really the same as for the new QmiMessageNasGetCellLocationInfoOutputUmtsInfoV2NeighboringGeranElement type, it is only a name change.

Since: 1.10


QmiMessageNasGetCellLocationInfoOutputIntrafrequencyLteInfoCellElement

typedef QmiMessageNasGetCellLocationInfoOutputIntrafrequencyLteInfoV2CellElement QmiMessageNasGetCellLocationInfoOutputIntrafrequencyLteInfoCellElement;

QmiMessageNasGetCellLocationInfoOutputIntrafrequencyLteInfoCellElement has been deprecated since version 1.26.6. and should not be used in newly-written code.

Use QmiMessageNasGetCellLocationInfoOutputIntrafrequencyLteInfoV2CellElement instead.

Intra-frequency LTE info cell.

The format of this deprecated type is really the same as for the new QmiMessageNasGetCellLocationInfoOutputIntrafrequencyLteInfoV2CellElement type, it is only a name change.

Since: 1.10


QMI_NAS_SIM_REJECT_STATE_SIM_VAILABLE

#define QMI_NAS_SIM_REJECT_STATE_SIM_VAILABLE (QmiDeprecatedNasSimRejectState) QMI_NAS_SIM_REJECT_STATE_SIM_AVAILABLE

QMI_NAS_SIM_REJECT_STATE_SIM_VAILABLE has been deprecated since version 1.14.0 and should not be used in newly-written code.

Use the correct QMI_NAS_SIM_REJECT_STATE_SIM_AVAILABLE name instead.

SIM available.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_VACANT

#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_VACANT (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_VACANT

QMI_WDS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_VACANT has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_VACANT name instead.

Address is valid but not yet allocated.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_TRANSLATION_FAILURE

#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_TRANSLATION_FAILURE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_TRANSLATION_FAILURE

QMI_WDS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_TRANSLATION_FAILURE has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_TRANSLATION_FAILURE name instead.

Address is invalid.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_NETWORK_RESOURCE_SHORTAGE

#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_RESOURCE_SHORTAGE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_NETWORK_RESOURCE_SHORTAGE

QMI_WDS_CDMA_CAUSE_CODE_NETWORK_RESOURCE_SHORTAGE has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_NETWORK_RESOURCE_SHORTAGE name instead.

Network resource shortage.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_NETWORK_FAILURE

#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_FAILURE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_NETWORK_FAILURE

QMI_WDS_CDMA_CAUSE_CODE_NETWORK_FAILURE has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_NETWORK_FAILURE name instead.

Network failed.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_NETWORK_INVALID_TELESERVICE_ID

#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_INVALID_TELESERVICE_ID (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_NETWORK_INVALID_TELESERVICE_ID

QMI_WDS_CDMA_CAUSE_CODE_NETWORK_INVALID_TELESERVICE_ID has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_NETWORK_INVALID_TELESERVICE_ID name instead.

SMS teleservice ID is invalid.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_NETWORK_OTHER

#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_OTHER (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_NETWORK_OTHER

QMI_WDS_CDMA_CAUSE_CODE_NETWORK_OTHER has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_NETWORK_OTHER name instead.

Other network error.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NO_PAGE_RESPONSE

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NO_PAGE_RESPONSE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_NO_PAGE_RESPONSE

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NO_PAGE_RESPONSE has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_NO_PAGE_RESPONSE name instead.

No page response from destination.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_BUSY

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_BUSY (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_BUSY

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_BUSY has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_BUSY name instead.

Destination is busy.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NO_ACK

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NO_ACK (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_NO_ACK

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NO_ACK has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_NO_ACK name instead.

No acknowledge from destination.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_RESOURCE_SHORTAGE

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_RESOURCE_SHORTAGE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_RESOURCE_SHORTAGE

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_RESOURCE_SHORTAGE has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_RESOURCE_SHORTAGE name instead.

Destination resource shortage.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_SMS_DELIVERY_POSTPONED

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_SMS_DELIVERY_POSTPONED (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_SMS_DELIVERY_POSTPONED

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_SMS_DELIVERY_POSTPONED has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_SMS_DELIVERY_POSTPONED name instead.

SMS delivery postponed.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_OUT_OF_SERVICE

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_OUT_OF_SERVICE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_OUT_OF_SERVICE

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_OUT_OF_SERVICE has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_OUT_OF_SERVICE name instead.

Destination out of service.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NOT_AT_ADDRESS

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NOT_AT_ADDRESS (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_NOT_AT_ADDRESS

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NOT_AT_ADDRESS has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_NOT_AT_ADDRESS name instead.

Destination not at address.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_OTHER

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_OTHER (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_OTHER

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_OTHER has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_OTHER name instead.

Other destination error.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_RESOURCE_SHORTAGE

#define QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_RESOURCE_SHORTAGE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_RADIO_INTERFACE_RESOURCE_SHORTAGE

QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_RESOURCE_SHORTAGE has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_RADIO_INTERFACE_RESOURCE_SHORTAGE name instead.

Radio interface resource shortage.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_INCOMPATIBILITY

#define QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_INCOMPATIBILITY (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_RADIO_INTERFACE_INCOMPATIBILITY

QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_INCOMPATIBILITY has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_RADIO_INTERFACE_INCOMPATIBILITY name instead.

Radio interface incompatibility.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_OTHER

#define QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_OTHER (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_RADIO_INTERFACE_OTHER

QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_OTHER has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_RADIO_INTERFACE_OTHER name instead.

Other radio interface error

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_GENERAL_ENCODING

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_ENCODING (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_ENCODING

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_ENCODING has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_GENERAL_ENCODING name instead.

Encoding error.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_ORIGIN_DENIED

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_ORIGIN_DENIED (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_SMS_ORIGIN_DENIED

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_ORIGIN_DENIED has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_GENERAL_SMS_ORIGIN_DENIED name instead.

SMS origin denied.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_DESTINATION_DENIED

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_DESTINATION_DENIED (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_SMS_DESTINATION_DENIED

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_DESTINATION_DENIED has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_GENERAL_SMS_DESTINATION_DENIED name instead.

SMS destination denied.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SUPPLEMENTARY_SERVICE_NOT_SUPPORTED

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SUPPLEMENTARY_SERVICE_NOT_SUPPORTED (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_SUPPLEMENTARY_SERVICE_NOT_SUPPORTED

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SUPPLEMENTARY_SERVICE_NOT_SUPPORTED has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_GENERAL_SUPPLEMENTARY_SERVICE_NOT_SUPPORTED name instead.

Supplementary service not supported.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_NOT_SUPPORTED

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_NOT_SUPPORTED (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_SMS_NOT_SUPPORTED

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_NOT_SUPPORTED has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_GENERAL_SMS_NOT_SUPPORTED name instead.

SMS not supported.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_GENERAL_MISSING_EXPECTED_PARAMETER

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_MISSING_EXPECTED_PARAMETER (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_MISSING_EXPECTED_PARAMETER

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_MISSING_EXPECTED_PARAMETER has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_GENERAL_MISSING_EXPECTED_PARAMETER name instead.

Missing optional expected parameter.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_GENERAL_MISSING_MANDATORY_PARAMETER

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_MISSING_MANDATORY_PARAMETER (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_MISSING_MANDATORY_PARAMETER

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_MISSING_MANDATORY_PARAMETER has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_GENERAL_MISSING_MANDATORY_PARAMETER name instead.

Missing mandatory parameter.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_GENERAL_UNRECOGNIZED_PARAMETER_VALUE

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_UNRECOGNIZED_PARAMETER_VALUE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_UNRECOGNIZED_PARAMETER_VALUE

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_UNRECOGNIZED_PARAMETER_VALUE has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_GENERAL_UNRECOGNIZED_PARAMETER_VALUE name instead.

Unrecognized parameter value.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_GENERAL_UNEXPECTED_PARAMETER_VALUE

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_UNEXPECTED_PARAMETER_VALUE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_UNEXPECTED_PARAMETER_VALUE

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_UNEXPECTED_PARAMETER_VALUE has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_GENERAL_UNEXPECTED_PARAMETER_VALUE name instead.

Unexpected parameter value.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_GENERAL_USER_DATA_SIZE_ERROR

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_USER_DATA_SIZE_ERROR (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_USER_DATA_SIZE_ERROR

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_USER_DATA_SIZE_ERROR has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_GENERAL_USER_DATA_SIZE_ERROR name instead.

User data size error.

Since: 1.0


QMI_WDS_CDMA_CAUSE_CODE_GENERAL_OTHER

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_OTHER (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_OTHER

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_OTHER has been deprecated since version 1.18.0 and should not be used in newly-written code.

Use the correct QMI_WMS_CDMA_CAUSE_CODE_GENERAL_OTHER name instead.

Other general error.

Since: 1.0


QMI_PROTOCOL_ERROR_QOS_UNAVAILABLE

#define QMI_PROTOCOL_ERROR_QOS_UNAVAILABLE (QmiDeprecatedProtocolError) QMI_PROTOCOL_ERROR_REQUESTED_NUMBER_UNSUPPORTED

QMI_PROTOCOL_ERROR_QOS_UNAVAILABLE has been deprecated since version 1.22.0 and should not be used in newly-written code.

Use the QMI_PROTOCOL_ERROR_REQUESTED_NUMBER_UNSUPPORTED instead.

QoS unavailable.

Since: 1.0


QMI_WDS_VERBOSE_CALL_END_REASON_CM_CONFIGURATION_FAILED

#define QMI_WDS_VERBOSE_CALL_END_REASON_CM_CONFIGURATION_FAILED (QmiDeprecatedWdsVerboseCallEndReasonCm) QMI_WDS_VERBOSE_CALL_END_REASON_CM_CONFERENCE_FAILED

QMI_WDS_VERBOSE_CALL_END_REASON_CM_CONFIGURATION_FAILED has been deprecated since version 1.24.10 and should not be used in newly-written code.

Use the correct QMI_WDS_VERBOSE_CALL_END_REASON_CM_CONFERENCE_FAILED name instead.

Conference (not configuration) failed.

Since: 1.0


QmiDmsDellFirmwareVersionType

typedef QmiDeprecatedDmsDellFirmwareVersionType QmiDmsDellFirmwareVersionType;

QmiDmsDellFirmwareVersionType has been deprecated since version 1.26 and should not be used in newly-written code.

Use QmiDmsFoxconnFirmwareVersionType instead.

Dell specific firmware version types.

Since: 1.22.4


QmiMessageDmsDellGetFirmwareVersionInput

typedef QmiDeprecatedMessageDmsDellGetFirmwareVersionInput QmiMessageDmsDellGetFirmwareVersionInput;

QmiMessageDmsDellGetFirmwareVersionInput has been deprecated since version 1.26 and should not be used in newly-written code.

Use QmiMessageDmsFoxconnGetFirmwareVersionInput instead.

The QmiMessageDmsDellGetFirmwareVersionInput structure contains private data and should only be accessed using the provided API.

Since: 1.22.4


QmiMessageDmsDellGetFirmwareVersionOutput

typedef QmiDeprecatedMessageDmsDellGetFirmwareVersionOutput QmiMessageDmsDellGetFirmwareVersionOutput;

QmiMessageDmsDellGetFirmwareVersionOutput has been deprecated since version 1.26 and should not be used in newly-written code.

Use QmiMessageDmsFoxconnGetFirmwareVersionOutput instead.

The QmiMessageDmsDellGetFirmwareVersionOutput structure contains private data and should only be accessed using the provided API.

Since: 1.22.4


QmiDmsDellDeviceMode

typedef QmiDeprecatedDmsDellDeviceMode QmiDmsDellDeviceMode;

QmiDmsDellDeviceMode has been deprecated since version 1.26 and should not be used in newly-written code.

Use QmiDmsFoxconnDeviceMode instead.

Dell specific device modes.

Since: 1.22.4


QmiMessageDmsDellChangeDeviceModeInput

typedef QmiDeprecatedMessageDmsDellChangeDeviceModeInput QmiMessageDmsDellChangeDeviceModeInput;

QmiMessageDmsDellChangeDeviceModeInput has been deprecated since version 1.26 and should not be used in newly-written code.

Use QmiMessageDmsFoxconnChangeDeviceModeInput instead.

The QmiMessageDmsDellChangeDeviceModeInput structure contains private data and should only be accessed using the provided API.

Since: 1.22.4


QmiMessageDmsDellChangeDeviceModeOutput

typedef QmiDeprecatedMessageDmsDellChangeDeviceModeOutput QmiMessageDmsDellChangeDeviceModeOutput;

QmiMessageDmsDellChangeDeviceModeOutput has been deprecated since version 1.26 and should not be used in newly-written code.

Use QmiMessageDmsFoxconnChangeDeviceModeOutput instead.

The QmiMessageDmsDellChangeDeviceModeOutput structure contains private data and should only be accessed using the provided API.

Since: 1.22.4


QmiMessageWdsGetDefaultProfileNumInput

typedef QmiDeprecatedMessageWdsGetDefaultProfileNumInput QmiMessageWdsGetDefaultProfileNumInput;

QmiMessageWdsGetDefaultProfileNumInput has been deprecated since version 1.28 and should not be used in newly-written code.

Use QmiMessageWdsGetDefaultProfileNumberInput instead.

The QmiMessageWdsGetDefaultProfileNumInput structure contains private data and should only be accessed using the provided API.

Since: 1.22


QmiMessageWdsGetDefaultProfileNumOutput

typedef QmiDeprecatedMessageWdsGetDefaultProfileNumOutput QmiMessageWdsGetDefaultProfileNumOutput;

QmiMessageWdsGetDefaultProfileNumOutput has been deprecated since version 1.28. and should not be used in newly-written code.

Use QmiMessageWdsGetDefaultProfileNumberOutput instead.

The QmiMessageWdsGetDefaultProfileNumOutput structure contains private data and should only be accessed using the provided API.

Since: 1.22


QmiMessageWdsSetDefaultProfileNumInput

typedef QmiDeprecatedMessageWdsSetDefaultProfileNumInput QmiMessageWdsSetDefaultProfileNumInput;

QmiMessageWdsSetDefaultProfileNumInput has been deprecated since version 1.28. and should not be used in newly-written code.

Use QmiMessageWdsSetDefaultProfileNumberInput instead.

The QmiMessageWdsSetDefaultProfileNumInput structure contains private data and should only be accessed using the provided API.

Since: 1.22


QmiMessageWdsSetDefaultProfileNumOutput

typedef QmiDeprecatedMessageWdsSetDefaultProfileNumOutput QmiMessageWdsSetDefaultProfileNumOutput;

QmiMessageWdsSetDefaultProfileNumOutput has been deprecated since version 1.28. and should not be used in newly-written code.

Use QmiMessageWdsSetDefaultProfileNumberOutput instead.

The QmiMessageWdsSetDefaultProfileNumOutput structure contains private data and should only be accessed using the provided API.

Since: 1.22


QmiConfigTypeAndId

typedef QmiDeprecatedConfigTypeAndId QmiConfigTypeAndId;

QmiConfigTypeAndId has been deprecated since version 1.32 and should not be used in newly-written code.

A QmiConfigTypeAndId struct.

This type is deprecated and there is no replacement as the new methods don't require any intermediate type any more.

Since: 1.18


QmiMessageDmsDeleteStoredImageInputImage

typedef QmiDeprecatedMessageDmsDeleteStoredImageInputImage QmiMessageDmsDeleteStoredImageInputImage;

QmiMessageDmsDeleteStoredImageInputImage has been deprecated since version 1.32 and should not be used in newly-written code.

A QmiMessageDmsDeleteStoredImageInputImage struct.

This type is deprecated and there is no replacement as the new methods don't require any intermediate type any more.

Since: 1.0


QmiMessageDmsGetStoredImageInfoInputImage

typedef QmiDeprecatedMessageDmsGetStoredImageInfoInputImage QmiMessageDmsGetStoredImageInfoInputImage;

QmiMessageDmsGetStoredImageInfoInputImage has been deprecated since version 1.32 and should not be used in newly-written code.

A QmiMessageDmsGetStoredImageInfoInputImage struct.

This type is deprecated and there is no replacement as the new methods don't require any intermediate type any more.

Since: 1.0


QmiIndicationLocPositionReportOutputDilutionOfPrecision

typedef QmiDeprecatedIndicationLocPositionReportOutputDilutionOfPrecision QmiIndicationLocPositionReportOutputDilutionOfPrecision;

QmiIndicationLocPositionReportOutputDilutionOfPrecision has been deprecated since version 1.32 and should not be used in newly-written code.

A QmiIndicationLocPositionReportOutputDilutionOfPrecision struct.

This type is deprecated and there is no replacement as the new methods don't require any intermediate type any more.

Since: 1.22


QmiIndicationLocPositionReportOutputGpsTime

typedef QmiDeprecatedIndicationLocPositionReportOutputGpsTime QmiIndicationLocPositionReportOutputGpsTime;

QmiIndicationLocPositionReportOutputGpsTime has been deprecated since version 1.32 and should not be used in newly-written code.

A QmiIndicationLocPositionReportOutputGpsTime struct.

This type is deprecated and there is no replacement as the new methods don't require any intermediate type any more.

Since: 1.22


QmiMessageUimGetConfigurationOutputPersonalizationStatusOtherSlotsSlotsElement

typedef struct {
    QmiUimCardApplicationPersonalizationFeature feature;
    guint8 verify_left;
    guint8 unblock_left;
} QmiMessageUimGetConfigurationOutputPersonalizationStatusOtherSlotsSlotsElement;

QmiMessageUimGetConfigurationOutputPersonalizationStatusOtherSlotsSlotsElement has been deprecated since version 1.32 and should not be used in newly-written code.

Use QmiMessageUimGetConfigurationOutputPersonalizationStatusOtherElementSlotElement instead.

A QmiMessageUimGetConfigurationOutputPersonalizationStatusOtherSlotsSlotsElement struct.

Since: 1.30


QmiWdsGetCurrentSettingsRequestedSettings

typedef QmiDeprecatedWdsGetCurrentSettingsRequestedSettings QmiWdsGetCurrentSettingsRequestedSettings;

QmiWdsGetCurrentSettingsRequestedSettings has been deprecated since version 1.32 and should not be used in newly-written code.

Use QmiWdsRequestedSettings instead.

Flags specifying WDS bearer settings.

Since: 1.0