MmGdbusModemSignal

MmGdbusModemSignal — Generated C code for the org.freedesktop.ModemManager1.Modem.Signal D-Bus interface

Functions

Properties

GVariant * cdma Read / Write
GVariant * evdo Read / Write
GVariant * gsm Read / Write
GVariant * lte Read / Write
guint rate Read / Write
GVariant * umts Read / Write

Signals

Types and Values

Object Hierarchy

    GInterface
    ╰── MmGdbusModemSignal

Prerequisites

MmGdbusModemSignal requires GObject.

Known Implementations

MmGdbusModemSignal is implemented by MMModemSignal, MmGdbusModemSignalProxy and MmGdbusModemSignalSkeleton.

Description

This section contains code for working with the org.freedesktop.ModemManager1.Modem.Signal D-Bus interface in C.

Functions

mm_gdbus_modem_signal_get_rate ()

guint
mm_gdbus_modem_signal_get_rate (MmGdbusModemSignal *object);

Gets the value of the "Rate" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModemSignal.

 

Returns

The property value.


mm_gdbus_modem_signal_get_cdma ()

GVariant *
mm_gdbus_modem_signal_get_cdma (MmGdbusModemSignal *object);

Gets the value of the "Cdma" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_signal_dup_cdma() if on another thread.

[skip]

Parameters

object

A MmGdbusModemSignal.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_signal_get_evdo ()

GVariant *
mm_gdbus_modem_signal_get_evdo (MmGdbusModemSignal *object);

Gets the value of the "Evdo" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_signal_dup_evdo() if on another thread.

[skip]

Parameters

object

A MmGdbusModemSignal.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_signal_get_gsm ()

GVariant *
mm_gdbus_modem_signal_get_gsm (MmGdbusModemSignal *object);

Gets the value of the "Gsm" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_signal_dup_gsm() if on another thread.

[skip]

Parameters

object

A MmGdbusModemSignal.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_signal_get_umts ()

GVariant *
mm_gdbus_modem_signal_get_umts (MmGdbusModemSignal *object);

Gets the value of the "Umts" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_signal_dup_umts() if on another thread.

[skip]

Parameters

object

A MmGdbusModemSignal.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_signal_get_lte ()

GVariant *
mm_gdbus_modem_signal_get_lte (MmGdbusModemSignal *object);

Gets the value of the "Lte" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_signal_dup_lte() if on another thread.

[skip]

Parameters

object

A MmGdbusModemSignal.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_signal_dup_cdma ()

GVariant *
mm_gdbus_modem_signal_dup_cdma (MmGdbusModemSignal *object);

Gets a copy of the "Cdma" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModemSignal.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().

[transfer full]


mm_gdbus_modem_signal_dup_evdo ()

GVariant *
mm_gdbus_modem_signal_dup_evdo (MmGdbusModemSignal *object);

Gets a copy of the "Evdo" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModemSignal.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().

[transfer full]


mm_gdbus_modem_signal_dup_gsm ()

GVariant *
mm_gdbus_modem_signal_dup_gsm (MmGdbusModemSignal *object);

Gets a copy of the "Gsm" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModemSignal.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().

[transfer full]


mm_gdbus_modem_signal_dup_umts ()

GVariant *
mm_gdbus_modem_signal_dup_umts (MmGdbusModemSignal *object);

Gets a copy of the "Umts" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModemSignal.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().

[transfer full]


mm_gdbus_modem_signal_dup_lte ()

GVariant *
mm_gdbus_modem_signal_dup_lte (MmGdbusModemSignal *object);

Gets a copy of the "Lte" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModemSignal.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().

[transfer full]


mm_gdbus_modem_signal_call_setup ()

void
mm_gdbus_modem_signal_call_setup (MmGdbusModemSignal *proxy,
                                  guint arg_rate,
                                  GCancellable *cancellable,
                                  GAsyncReadyCallback callback,
                                  gpointer user_data);

Asynchronously invokes the Setup() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_signal_call_setup_finish() to get the result of the operation.

See mm_gdbus_modem_signal_call_setup_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModemSignalProxy.

 

arg_rate

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem_signal_call_setup_finish ()

gboolean
mm_gdbus_modem_signal_call_setup_finish
                               (MmGdbusModemSignal *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_signal_call_setup().

Parameters

proxy

A MmGdbusModemSignalProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_signal_call_setup().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_signal_call_setup_sync ()

gboolean
mm_gdbus_modem_signal_call_setup_sync (MmGdbusModemSignal *proxy,
                                       guint arg_rate,
                                       GCancellable *cancellable,
                                       GError **error);

Synchronously invokes the Setup() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_signal_call_setup() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModemSignalProxy.

 

arg_rate

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]

Types and Values

MmGdbusModemSignal

typedef struct _MmGdbusModemSignal MmGdbusModemSignal;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.Signal.


struct MmGdbusModemSignalIface

struct MmGdbusModemSignalIface {
  GTypeInterface parent_iface;


  gboolean (*handle_setup) (
    MmGdbusModemSignal *object,
    GDBusMethodInvocation *invocation,
    guint arg_rate);

  GVariant * (*get_cdma) (MmGdbusModemSignal *object);

  GVariant * (*get_evdo) (MmGdbusModemSignal *object);

  GVariant * (*get_gsm) (MmGdbusModemSignal *object);

  GVariant * (*get_lte) (MmGdbusModemSignal *object);

  guint  (*get_rate) (MmGdbusModemSignal *object);

  GVariant * (*get_umts) (MmGdbusModemSignal *object);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.Signal.

Members

GTypeInterface parent_iface;

The parent interface.

 

handle_setup ()

Handler for the “handle-setup” signal.

 

get_cdma ()

Getter for the “cdma” property.

 

get_evdo ()

Getter for the “evdo” property.

 

get_gsm ()

Getter for the “gsm” property.

 

get_lte ()

Getter for the “lte” property.

 

get_rate ()

Getter for the “rate” property.

 

get_umts ()

Getter for the “umts” property.

 

Property Details

The “cdma” property

  “cdma”                     GVariant *

Represents the D-Bus property "Cdma".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<a{sv}>

Default value: NULL


The “evdo” property

  “evdo”                     GVariant *

Represents the D-Bus property "Evdo".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<a{sv}>

Default value: NULL


The “gsm” property

  “gsm”                      GVariant *

Represents the D-Bus property "Gsm".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<a{sv}>

Default value: NULL


The “lte” property

  “lte”                      GVariant *

Represents the D-Bus property "Lte".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<a{sv}>

Default value: NULL


The “rate” property

  “rate”                     guint

Represents the D-Bus property "Rate".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0


The “umts” property

  “umts”                     GVariant *

Represents the D-Bus property "Umts".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<a{sv}>

Default value: NULL

Signal Details

The “handle-setup” signal

gboolean
user_function (MmGdbusModemSignal    *object,
               GDBusMethodInvocation *invocation,
               guint                  arg_rate,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Setup() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_signal_complete_setup() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModemSignal.

 

invocation

A GDBusMethodInvocation.

 

arg_rate

Argument passed by remote caller.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last