MmGdbusModem

MmGdbusModem — Generated C code for the org.freedesktop.ModemManager1.Modem D-Bus interface

Functions

guint mm_gdbus_modem_get_access_technologies ()
const gchar *const * mm_gdbus_modem_get_bearers ()
gchar ** mm_gdbus_modem_dup_bearers ()
GVariant * mm_gdbus_modem_get_current_modes ()
GVariant * mm_gdbus_modem_dup_current_modes ()
GVariant * mm_gdbus_modem_get_current_bands ()
GVariant * mm_gdbus_modem_dup_current_bands ()
guint mm_gdbus_modem_get_current_capabilities ()
const gchar * mm_gdbus_modem_get_device ()
gchar * mm_gdbus_modem_dup_device ()
const gchar * mm_gdbus_modem_get_device_identifier ()
gchar * mm_gdbus_modem_dup_device_identifier ()
const gchar *const * mm_gdbus_modem_get_drivers ()
gchar ** mm_gdbus_modem_dup_drivers ()
const gchar * mm_gdbus_modem_get_equipment_identifier ()
gchar * mm_gdbus_modem_dup_equipment_identifier ()
const gchar * mm_gdbus_modem_get_manufacturer ()
gchar * mm_gdbus_modem_dup_manufacturer ()
guint mm_gdbus_modem_get_max_active_bearers ()
guint mm_gdbus_modem_get_max_bearers ()
const gchar * mm_gdbus_modem_get_model ()
gchar * mm_gdbus_modem_dup_model ()
const gchar *const * mm_gdbus_modem_get_own_numbers ()
gchar ** mm_gdbus_modem_dup_own_numbers ()
const gchar * mm_gdbus_modem_get_plugin ()
gchar * mm_gdbus_modem_dup_plugin ()
guint mm_gdbus_modem_get_power_state ()
const gchar * mm_gdbus_modem_get_primary_port ()
gchar * mm_gdbus_modem_dup_primary_port ()
GVariant * mm_gdbus_modem_get_ports ()
GVariant * mm_gdbus_modem_dup_ports ()
const gchar * mm_gdbus_modem_get_revision ()
gchar * mm_gdbus_modem_dup_revision ()
const gchar * mm_gdbus_modem_get_hardware_revision ()
gchar * mm_gdbus_modem_dup_hardware_revision ()
GVariant * mm_gdbus_modem_get_signal_quality ()
GVariant * mm_gdbus_modem_dup_signal_quality ()
const gchar * mm_gdbus_modem_get_sim ()
gchar * mm_gdbus_modem_dup_sim ()
GVariant * mm_gdbus_modem_get_supported_capabilities ()
GVariant * mm_gdbus_modem_dup_supported_capabilities ()
gint mm_gdbus_modem_get_state ()
guint mm_gdbus_modem_get_state_failed_reason ()
GVariant * mm_gdbus_modem_get_supported_bands ()
GVariant * mm_gdbus_modem_dup_supported_bands ()
guint mm_gdbus_modem_get_supported_ip_families ()
GVariant * mm_gdbus_modem_get_supported_modes ()
GVariant * mm_gdbus_modem_dup_supported_modes ()
guint mm_gdbus_modem_get_unlock_required ()
GVariant * mm_gdbus_modem_get_unlock_retries ()
GVariant * mm_gdbus_modem_dup_unlock_retries ()
void mm_gdbus_modem_call_enable ()
gboolean mm_gdbus_modem_call_enable_finish ()
gboolean mm_gdbus_modem_call_enable_sync ()
void mm_gdbus_modem_call_set_power_state ()
gboolean mm_gdbus_modem_call_set_power_state_finish ()
gboolean mm_gdbus_modem_call_set_power_state_sync ()
void mm_gdbus_modem_call_create_bearer ()
gboolean mm_gdbus_modem_call_create_bearer_finish ()
gboolean mm_gdbus_modem_call_create_bearer_sync ()
void mm_gdbus_modem_call_delete_bearer ()
gboolean mm_gdbus_modem_call_delete_bearer_finish ()
gboolean mm_gdbus_modem_call_delete_bearer_sync ()
void mm_gdbus_modem_call_list_bearers ()
gboolean mm_gdbus_modem_call_list_bearers_finish ()
gboolean mm_gdbus_modem_call_list_bearers_sync ()
void mm_gdbus_modem_call_reset ()
gboolean mm_gdbus_modem_call_reset_finish ()
gboolean mm_gdbus_modem_call_reset_sync ()
void mm_gdbus_modem_call_factory_reset ()
gboolean mm_gdbus_modem_call_factory_reset_finish ()
gboolean mm_gdbus_modem_call_factory_reset_sync ()
void mm_gdbus_modem_call_set_current_modes ()
gboolean mm_gdbus_modem_call_set_current_modes_finish ()
gboolean mm_gdbus_modem_call_set_current_modes_sync ()
void mm_gdbus_modem_call_set_current_bands ()
gboolean mm_gdbus_modem_call_set_current_bands_finish ()
gboolean mm_gdbus_modem_call_set_current_bands_sync ()
void mm_gdbus_modem_call_set_current_capabilities ()
gboolean mm_gdbus_modem_call_set_current_capabilities_finish ()
gboolean mm_gdbus_modem_call_set_current_capabilities_sync ()
void mm_gdbus_modem_call_command ()
gboolean mm_gdbus_modem_call_command_finish ()
gboolean mm_gdbus_modem_call_command_sync ()

Properties

guint access-technologies Read / Write
GStrv bearers Read / Write
GVariant * current-bands Read / Write
guint current-capabilities Read / Write
GVariant * current-modes Read / Write
gchar * device Read / Write
gchar * device-identifier Read / Write
GStrv drivers Read / Write
gchar * equipment-identifier Read / Write
gchar * hardware-revision Read / Write
gchar * manufacturer Read / Write
guint max-active-bearers Read / Write
guint max-bearers Read / Write
gchar * model Read / Write
GStrv own-numbers Read / Write
gchar * plugin Read / Write
GVariant * ports Read / Write
guint power-state Read / Write
gchar * primary-port Read / Write
gchar * revision Read / Write
GVariant * signal-quality Read / Write
gchar * sim Read / Write
gint state Read / Write
guint state-failed-reason Read / Write
GVariant * supported-bands Read / Write
GVariant * supported-capabilities Read / Write
guint supported-ip-families Read / Write
GVariant * supported-modes Read / Write
guint unlock-required Read / Write
GVariant * unlock-retries Read / Write

Signals

Types and Values

Object Hierarchy

    GInterface
    ╰── MmGdbusModem

Prerequisites

MmGdbusModem requires GObject.

Known Implementations

MmGdbusModem is implemented by MMModem, MmGdbusModemProxy and MmGdbusModemSkeleton.

Description

This section contains code for working with the org.freedesktop.ModemManager1.Modem D-Bus interface in C.

Functions

mm_gdbus_modem_get_access_technologies ()

guint
mm_gdbus_modem_get_access_technologies
                               (MmGdbusModem *object);

Gets the value of the "AccessTechnologies" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value.


mm_gdbus_modem_get_bearers ()

const gchar *const *
mm_gdbus_modem_get_bearers (MmGdbusModem *object);

Gets the value of the "Bearers" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_bearers() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_bearers ()

gchar **
mm_gdbus_modem_dup_bearers (MmGdbusModem *object);

Gets a copy of the "Bearers" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_strfreev().

[transfer full]


mm_gdbus_modem_get_current_modes ()

GVariant *
mm_gdbus_modem_get_current_modes (MmGdbusModem *object);

Gets the value of the "CurrentModes" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_current_modes() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_current_modes ()

GVariant *
mm_gdbus_modem_dup_current_modes (MmGdbusModem *object);

Gets a copy of the "CurrentModes" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().

[transfer full]


mm_gdbus_modem_get_current_bands ()

GVariant *
mm_gdbus_modem_get_current_bands (MmGdbusModem *object);

Gets the value of the "CurrentBands" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_current_bands() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_current_bands ()

GVariant *
mm_gdbus_modem_dup_current_bands (MmGdbusModem *object);

Gets a copy of the "CurrentBands" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().

[transfer full]


mm_gdbus_modem_get_current_capabilities ()

guint
mm_gdbus_modem_get_current_capabilities
                               (MmGdbusModem *object);

Gets the value of the "CurrentCapabilities" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value.


mm_gdbus_modem_get_device ()

const gchar *
mm_gdbus_modem_get_device (MmGdbusModem *object);

Gets the value of the "Device" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_device() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_device ()

gchar *
mm_gdbus_modem_dup_device (MmGdbusModem *object);

Gets a copy of the "Device" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full]


mm_gdbus_modem_get_device_identifier ()

const gchar *
mm_gdbus_modem_get_device_identifier (MmGdbusModem *object);

Gets the value of the "DeviceIdentifier" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_device_identifier() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_device_identifier ()

gchar *
mm_gdbus_modem_dup_device_identifier (MmGdbusModem *object);

Gets a copy of the "DeviceIdentifier" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full]


mm_gdbus_modem_get_drivers ()

const gchar *const *
mm_gdbus_modem_get_drivers (MmGdbusModem *object);

Gets the value of the "Drivers" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_drivers() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_drivers ()

gchar **
mm_gdbus_modem_dup_drivers (MmGdbusModem *object);

Gets a copy of the "Drivers" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_strfreev().

[transfer full]


mm_gdbus_modem_get_equipment_identifier ()

const gchar *
mm_gdbus_modem_get_equipment_identifier
                               (MmGdbusModem *object);

Gets the value of the "EquipmentIdentifier" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_equipment_identifier() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_equipment_identifier ()

gchar *
mm_gdbus_modem_dup_equipment_identifier
                               (MmGdbusModem *object);

Gets a copy of the "EquipmentIdentifier" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full]


mm_gdbus_modem_get_manufacturer ()

const gchar *
mm_gdbus_modem_get_manufacturer (MmGdbusModem *object);

Gets the value of the "Manufacturer" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_manufacturer() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_manufacturer ()

gchar *
mm_gdbus_modem_dup_manufacturer (MmGdbusModem *object);

Gets a copy of the "Manufacturer" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full]


mm_gdbus_modem_get_max_active_bearers ()

guint
mm_gdbus_modem_get_max_active_bearers (MmGdbusModem *object);

Gets the value of the "MaxActiveBearers" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value.


mm_gdbus_modem_get_max_bearers ()

guint
mm_gdbus_modem_get_max_bearers (MmGdbusModem *object);

Gets the value of the "MaxBearers" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value.


mm_gdbus_modem_get_model ()

const gchar *
mm_gdbus_modem_get_model (MmGdbusModem *object);

Gets the value of the "Model" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_model() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_model ()

gchar *
mm_gdbus_modem_dup_model (MmGdbusModem *object);

Gets a copy of the "Model" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full]


mm_gdbus_modem_get_own_numbers ()

const gchar *const *
mm_gdbus_modem_get_own_numbers (MmGdbusModem *object);

Gets the value of the "OwnNumbers" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_own_numbers() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_own_numbers ()

gchar **
mm_gdbus_modem_dup_own_numbers (MmGdbusModem *object);

Gets a copy of the "OwnNumbers" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_strfreev().

[transfer full]


mm_gdbus_modem_get_plugin ()

const gchar *
mm_gdbus_modem_get_plugin (MmGdbusModem *object);

Gets the value of the "Plugin" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_plugin() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_plugin ()

gchar *
mm_gdbus_modem_dup_plugin (MmGdbusModem *object);

Gets a copy of the "Plugin" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full]


mm_gdbus_modem_get_power_state ()

guint
mm_gdbus_modem_get_power_state (MmGdbusModem *object);

Gets the value of the "PowerState" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value.


mm_gdbus_modem_get_primary_port ()

const gchar *
mm_gdbus_modem_get_primary_port (MmGdbusModem *object);

Gets the value of the "PrimaryPort" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_primary_port() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_primary_port ()

gchar *
mm_gdbus_modem_dup_primary_port (MmGdbusModem *object);

Gets a copy of the "PrimaryPort" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full]


mm_gdbus_modem_get_ports ()

GVariant *
mm_gdbus_modem_get_ports (MmGdbusModem *object);

Gets the value of the "Ports" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_ports() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_ports ()

GVariant *
mm_gdbus_modem_dup_ports (MmGdbusModem *object);

Gets a copy of the "Ports" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().

[transfer full]


mm_gdbus_modem_get_revision ()

const gchar *
mm_gdbus_modem_get_revision (MmGdbusModem *object);

Gets the value of the "Revision" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_revision() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_revision ()

gchar *
mm_gdbus_modem_dup_revision (MmGdbusModem *object);

Gets a copy of the "Revision" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full]


mm_gdbus_modem_get_hardware_revision ()

const gchar *
mm_gdbus_modem_get_hardware_revision (MmGdbusModem *object);

Gets the value of the "HardwareRevision" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_hardware_revision() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_hardware_revision ()

gchar *
mm_gdbus_modem_dup_hardware_revision (MmGdbusModem *object);

Gets a copy of the "HardwareRevision" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full]


mm_gdbus_modem_get_signal_quality ()

GVariant *
mm_gdbus_modem_get_signal_quality (MmGdbusModem *object);

Gets the value of the "SignalQuality" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_signal_quality() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_signal_quality ()

GVariant *
mm_gdbus_modem_dup_signal_quality (MmGdbusModem *object);

Gets a copy of the "SignalQuality" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().

[transfer full]


mm_gdbus_modem_get_sim ()

const gchar *
mm_gdbus_modem_get_sim (MmGdbusModem *object);

Gets the value of the "Sim" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_sim() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_sim ()

gchar *
mm_gdbus_modem_dup_sim (MmGdbusModem *object);

Gets a copy of the "Sim" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full]


mm_gdbus_modem_get_supported_capabilities ()

GVariant *
mm_gdbus_modem_get_supported_capabilities
                               (MmGdbusModem *object);

Gets the value of the "SupportedCapabilities" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_supported_capabilities() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_supported_capabilities ()

GVariant *
mm_gdbus_modem_dup_supported_capabilities
                               (MmGdbusModem *object);

Gets a copy of the "SupportedCapabilities" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().

[transfer full]


mm_gdbus_modem_get_state ()

gint
mm_gdbus_modem_get_state (MmGdbusModem *object);

Gets the value of the "State" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value.


mm_gdbus_modem_get_state_failed_reason ()

guint
mm_gdbus_modem_get_state_failed_reason
                               (MmGdbusModem *object);

Gets the value of the "StateFailedReason" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value.


mm_gdbus_modem_get_supported_bands ()

GVariant *
mm_gdbus_modem_get_supported_bands (MmGdbusModem *object);

Gets the value of the "SupportedBands" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_supported_bands() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_supported_bands ()

GVariant *
mm_gdbus_modem_dup_supported_bands (MmGdbusModem *object);

Gets a copy of the "SupportedBands" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().

[transfer full]


mm_gdbus_modem_get_supported_ip_families ()

guint
mm_gdbus_modem_get_supported_ip_families
                               (MmGdbusModem *object);

Gets the value of the "SupportedIpFamilies" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value.


mm_gdbus_modem_get_supported_modes ()

GVariant *
mm_gdbus_modem_get_supported_modes (MmGdbusModem *object);

Gets the value of the "SupportedModes" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_supported_modes() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_supported_modes ()

GVariant *
mm_gdbus_modem_dup_supported_modes (MmGdbusModem *object);

Gets a copy of the "SupportedModes" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().

[transfer full]


mm_gdbus_modem_get_unlock_required ()

guint
mm_gdbus_modem_get_unlock_required (MmGdbusModem *object);

Gets the value of the "UnlockRequired" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value.


mm_gdbus_modem_get_unlock_retries ()

GVariant *
mm_gdbus_modem_get_unlock_retries (MmGdbusModem *object);

Gets the value of the "UnlockRetries" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_dup_unlock_retries() if on another thread.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem_dup_unlock_retries ()

GVariant *
mm_gdbus_modem_dup_unlock_retries (MmGdbusModem *object);

Gets a copy of the "UnlockRetries" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().

[transfer full]


mm_gdbus_modem_call_enable ()

void
mm_gdbus_modem_call_enable (MmGdbusModem *proxy,
                            gboolean arg_enable,
                            GCancellable *cancellable,
                            GAsyncReadyCallback callback,
                            gpointer user_data);

Asynchronously invokes the Enable() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_call_enable_finish() to get the result of the operation.

See mm_gdbus_modem_call_enable_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_enable

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem_call_enable_finish ()

gboolean
mm_gdbus_modem_call_enable_finish (MmGdbusModem *proxy,
                                   GAsyncResult *res,
                                   GError **error);

Finishes an operation started with mm_gdbus_modem_call_enable().

Parameters

proxy

A MmGdbusModemProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_call_enable().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_enable_sync ()

gboolean
mm_gdbus_modem_call_enable_sync (MmGdbusModem *proxy,
                                 gboolean arg_enable,
                                 GCancellable *cancellable,
                                 GError **error);

Synchronously invokes the Enable() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_call_enable() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_enable

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_set_power_state ()

void
mm_gdbus_modem_call_set_power_state (MmGdbusModem *proxy,
                                     guint arg_state,
                                     GCancellable *cancellable,
                                     GAsyncReadyCallback callback,
                                     gpointer user_data);

Asynchronously invokes the SetPowerState() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_call_set_power_state_finish() to get the result of the operation.

See mm_gdbus_modem_call_set_power_state_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_state

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem_call_set_power_state_finish ()

gboolean
mm_gdbus_modem_call_set_power_state_finish
                               (MmGdbusModem *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_call_set_power_state().

Parameters

proxy

A MmGdbusModemProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_call_set_power_state().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_set_power_state_sync ()

gboolean
mm_gdbus_modem_call_set_power_state_sync
                               (MmGdbusModem *proxy,
                                guint arg_state,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SetPowerState() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_call_set_power_state() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_state

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_create_bearer ()

void
mm_gdbus_modem_call_create_bearer (MmGdbusModem *proxy,
                                   GVariant *arg_properties,
                                   GCancellable *cancellable,
                                   GAsyncReadyCallback callback,
                                   gpointer user_data);

Asynchronously invokes the CreateBearer() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_call_create_bearer_finish() to get the result of the operation.

See mm_gdbus_modem_call_create_bearer_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_properties

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem_call_create_bearer_finish ()

gboolean
mm_gdbus_modem_call_create_bearer_finish
                               (MmGdbusModem *proxy,
                                gchar **out_path,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_call_create_bearer().

Parameters

proxy

A MmGdbusModemProxy.

 

out_path

Return location for return parameter or NULL to ignore.

[out]

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_call_create_bearer().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_create_bearer_sync ()

gboolean
mm_gdbus_modem_call_create_bearer_sync
                               (MmGdbusModem *proxy,
                                GVariant *arg_properties,
                                gchar **out_path,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the CreateBearer() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_call_create_bearer() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_properties

Argument to pass with the method invocation.

 

out_path

Return location for return parameter or NULL to ignore.

[out]

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_delete_bearer ()

void
mm_gdbus_modem_call_delete_bearer (MmGdbusModem *proxy,
                                   const gchar *arg_bearer,
                                   GCancellable *cancellable,
                                   GAsyncReadyCallback callback,
                                   gpointer user_data);

Asynchronously invokes the DeleteBearer() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_call_delete_bearer_finish() to get the result of the operation.

See mm_gdbus_modem_call_delete_bearer_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_bearer

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem_call_delete_bearer_finish ()

gboolean
mm_gdbus_modem_call_delete_bearer_finish
                               (MmGdbusModem *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_call_delete_bearer().

Parameters

proxy

A MmGdbusModemProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_call_delete_bearer().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_delete_bearer_sync ()

gboolean
mm_gdbus_modem_call_delete_bearer_sync
                               (MmGdbusModem *proxy,
                                const gchar *arg_bearer,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the DeleteBearer() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_call_delete_bearer() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_bearer

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_list_bearers ()

void
mm_gdbus_modem_call_list_bearers (MmGdbusModem *proxy,
                                  GCancellable *cancellable,
                                  GAsyncReadyCallback callback,
                                  gpointer user_data);

Asynchronously invokes the ListBearers() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_call_list_bearers_finish() to get the result of the operation.

See mm_gdbus_modem_call_list_bearers_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem_call_list_bearers_finish ()

gboolean
mm_gdbus_modem_call_list_bearers_finish
                               (MmGdbusModem *proxy,
                                gchar ***out_bearers,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_call_list_bearers().

Parameters

proxy

A MmGdbusModemProxy.

 

out_bearers

Return location for return parameter or NULL to ignore.

[out]

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_call_list_bearers().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_list_bearers_sync ()

gboolean
mm_gdbus_modem_call_list_bearers_sync (MmGdbusModem *proxy,
                                       gchar ***out_bearers,
                                       GCancellable *cancellable,
                                       GError **error);

Synchronously invokes the ListBearers() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_call_list_bearers() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

out_bearers

Return location for return parameter or NULL to ignore.

[out]

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_reset ()

void
mm_gdbus_modem_call_reset (MmGdbusModem *proxy,
                           GCancellable *cancellable,
                           GAsyncReadyCallback callback,
                           gpointer user_data);

Asynchronously invokes the Reset() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_call_reset_finish() to get the result of the operation.

See mm_gdbus_modem_call_reset_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem_call_reset_finish ()

gboolean
mm_gdbus_modem_call_reset_finish (MmGdbusModem *proxy,
                                  GAsyncResult *res,
                                  GError **error);

Finishes an operation started with mm_gdbus_modem_call_reset().

Parameters

proxy

A MmGdbusModemProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_call_reset().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_reset_sync ()

gboolean
mm_gdbus_modem_call_reset_sync (MmGdbusModem *proxy,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Reset() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_call_reset() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_factory_reset ()

void
mm_gdbus_modem_call_factory_reset (MmGdbusModem *proxy,
                                   const gchar *arg_code,
                                   GCancellable *cancellable,
                                   GAsyncReadyCallback callback,
                                   gpointer user_data);

Asynchronously invokes the FactoryReset() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_call_factory_reset_finish() to get the result of the operation.

See mm_gdbus_modem_call_factory_reset_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_code

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem_call_factory_reset_finish ()

gboolean
mm_gdbus_modem_call_factory_reset_finish
                               (MmGdbusModem *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_call_factory_reset().

Parameters

proxy

A MmGdbusModemProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_call_factory_reset().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_factory_reset_sync ()

gboolean
mm_gdbus_modem_call_factory_reset_sync
                               (MmGdbusModem *proxy,
                                const gchar *arg_code,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the FactoryReset() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_call_factory_reset() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_code

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_set_current_modes ()

void
mm_gdbus_modem_call_set_current_modes (MmGdbusModem *proxy,
                                       GVariant *arg_modes,
                                       GCancellable *cancellable,
                                       GAsyncReadyCallback callback,
                                       gpointer user_data);

Asynchronously invokes the SetCurrentModes() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_call_set_current_modes_finish() to get the result of the operation.

See mm_gdbus_modem_call_set_current_modes_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_modes

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem_call_set_current_modes_finish ()

gboolean
mm_gdbus_modem_call_set_current_modes_finish
                               (MmGdbusModem *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_call_set_current_modes().

Parameters

proxy

A MmGdbusModemProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_call_set_current_modes().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_set_current_modes_sync ()

gboolean
mm_gdbus_modem_call_set_current_modes_sync
                               (MmGdbusModem *proxy,
                                GVariant *arg_modes,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SetCurrentModes() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_call_set_current_modes() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_modes

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_set_current_bands ()

void
mm_gdbus_modem_call_set_current_bands (MmGdbusModem *proxy,
                                       GVariant *arg_bands,
                                       GCancellable *cancellable,
                                       GAsyncReadyCallback callback,
                                       gpointer user_data);

Asynchronously invokes the SetCurrentBands() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_call_set_current_bands_finish() to get the result of the operation.

See mm_gdbus_modem_call_set_current_bands_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_bands

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem_call_set_current_bands_finish ()

gboolean
mm_gdbus_modem_call_set_current_bands_finish
                               (MmGdbusModem *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_call_set_current_bands().

Parameters

proxy

A MmGdbusModemProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_call_set_current_bands().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_set_current_bands_sync ()

gboolean
mm_gdbus_modem_call_set_current_bands_sync
                               (MmGdbusModem *proxy,
                                GVariant *arg_bands,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SetCurrentBands() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_call_set_current_bands() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_bands

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_set_current_capabilities ()

void
mm_gdbus_modem_call_set_current_capabilities
                               (MmGdbusModem *proxy,
                                guint arg_capabilities,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SetCurrentCapabilities() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_call_set_current_capabilities_finish() to get the result of the operation.

See mm_gdbus_modem_call_set_current_capabilities_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_capabilities

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem_call_set_current_capabilities_finish ()

gboolean
mm_gdbus_modem_call_set_current_capabilities_finish
                               (MmGdbusModem *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_call_set_current_capabilities().

Parameters

proxy

A MmGdbusModemProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_call_set_current_capabilities().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_set_current_capabilities_sync ()

gboolean
mm_gdbus_modem_call_set_current_capabilities_sync
                               (MmGdbusModem *proxy,
                                guint arg_capabilities,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SetCurrentCapabilities() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_call_set_current_capabilities() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_capabilities

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_command ()

void
mm_gdbus_modem_call_command (MmGdbusModem *proxy,
                             const gchar *arg_cmd,
                             guint arg_timeout,
                             GCancellable *cancellable,
                             GAsyncReadyCallback callback,
                             gpointer user_data);

Asynchronously invokes the Command() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_call_command_finish() to get the result of the operation.

See mm_gdbus_modem_call_command_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_cmd

Argument to pass with the method invocation.

 

arg_timeout

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem_call_command_finish ()

gboolean
mm_gdbus_modem_call_command_finish (MmGdbusModem *proxy,
                                    gchar **out_response,
                                    GAsyncResult *res,
                                    GError **error);

Finishes an operation started with mm_gdbus_modem_call_command().

Parameters

proxy

A MmGdbusModemProxy.

 

out_response

Return location for return parameter or NULL to ignore.

[out]

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_call_command().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem_call_command_sync ()

gboolean
mm_gdbus_modem_call_command_sync (MmGdbusModem *proxy,
                                  const gchar *arg_cmd,
                                  guint arg_timeout,
                                  gchar **out_response,
                                  GCancellable *cancellable,
                                  GError **error);

Synchronously invokes the Command() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_call_command() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModemProxy.

 

arg_cmd

Argument to pass with the method invocation.

 

arg_timeout

Argument to pass with the method invocation.

 

out_response

Return location for return parameter or NULL to ignore.

[out]

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]

Types and Values

MmGdbusModem

typedef struct _MmGdbusModem MmGdbusModem;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.


struct MmGdbusModemIface

struct MmGdbusModemIface {
  GTypeInterface parent_iface;



  gboolean (*handle_command) (
    MmGdbusModem *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_cmd,
    guint arg_timeout);

  gboolean (*handle_create_bearer) (
    MmGdbusModem *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_properties);

  gboolean (*handle_delete_bearer) (
    MmGdbusModem *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_bearer);

  gboolean (*handle_enable) (
    MmGdbusModem *object,
    GDBusMethodInvocation *invocation,
    gboolean arg_enable);

  gboolean (*handle_factory_reset) (
    MmGdbusModem *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_code);

  gboolean (*handle_list_bearers) (
    MmGdbusModem *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_reset) (
    MmGdbusModem *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_set_current_bands) (
    MmGdbusModem *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_bands);

  gboolean (*handle_set_current_capabilities) (
    MmGdbusModem *object,
    GDBusMethodInvocation *invocation,
    guint arg_capabilities);

  gboolean (*handle_set_current_modes) (
    MmGdbusModem *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_modes);

  gboolean (*handle_set_power_state) (
    MmGdbusModem *object,
    GDBusMethodInvocation *invocation,
    guint arg_state);

  guint  (*get_access_technologies) (MmGdbusModem *object);

  const gchar *const * (*get_bearers) (MmGdbusModem *object);

  GVariant * (*get_current_bands) (MmGdbusModem *object);

  guint  (*get_current_capabilities) (MmGdbusModem *object);

  GVariant * (*get_current_modes) (MmGdbusModem *object);

  const gchar * (*get_device) (MmGdbusModem *object);

  const gchar * (*get_device_identifier) (MmGdbusModem *object);

  const gchar *const * (*get_drivers) (MmGdbusModem *object);

  const gchar * (*get_equipment_identifier) (MmGdbusModem *object);

  const gchar * (*get_hardware_revision) (MmGdbusModem *object);

  const gchar * (*get_manufacturer) (MmGdbusModem *object);

  guint  (*get_max_active_bearers) (MmGdbusModem *object);

  guint  (*get_max_bearers) (MmGdbusModem *object);

  const gchar * (*get_model) (MmGdbusModem *object);

  const gchar *const * (*get_own_numbers) (MmGdbusModem *object);

  const gchar * (*get_plugin) (MmGdbusModem *object);

  GVariant * (*get_ports) (MmGdbusModem *object);

  guint  (*get_power_state) (MmGdbusModem *object);

  const gchar * (*get_primary_port) (MmGdbusModem *object);

  const gchar * (*get_revision) (MmGdbusModem *object);

  GVariant * (*get_signal_quality) (MmGdbusModem *object);

  const gchar * (*get_sim) (MmGdbusModem *object);

  gint  (*get_state) (MmGdbusModem *object);

  guint  (*get_state_failed_reason) (MmGdbusModem *object);

  GVariant * (*get_supported_bands) (MmGdbusModem *object);

  GVariant * (*get_supported_capabilities) (MmGdbusModem *object);

  guint  (*get_supported_ip_families) (MmGdbusModem *object);

  GVariant * (*get_supported_modes) (MmGdbusModem *object);

  guint  (*get_unlock_required) (MmGdbusModem *object);

  GVariant * (*get_unlock_retries) (MmGdbusModem *object);

  void (*state_changed) (
    MmGdbusModem *object,
    gint arg_old,
    gint arg_new,
    guint arg_reason);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.

Members

GTypeInterface parent_iface;

The parent interface.

 

handle_command ()

Handler for the “handle-command” signal.

 

handle_create_bearer ()

Handler for the “handle-create-bearer” signal.

 

handle_delete_bearer ()

Handler for the “handle-delete-bearer” signal.

 

handle_enable ()

Handler for the “handle-enable” signal.

 

handle_factory_reset ()

Handler for the “handle-factory-reset” signal.

 

handle_list_bearers ()

Handler for the “handle-list-bearers” signal.

 

handle_reset ()

Handler for the “handle-reset” signal.

 

handle_set_current_bands ()

Handler for the “handle-set-current-bands” signal.

 

handle_set_current_capabilities ()

Handler for the “handle-set-current-capabilities” signal.

 

handle_set_current_modes ()

Handler for the “handle-set-current-modes” signal.

 

handle_set_power_state ()

Handler for the “handle-set-power-state” signal.

 

get_access_technologies ()

Getter for the “access-technologies” property.

 

get_bearers ()

Getter for the “bearers” property.

 

get_current_bands ()

Getter for the “current-bands” property.

 

get_current_capabilities ()

Getter for the “current-capabilities” property.

 

get_current_modes ()

Getter for the “current-modes” property.

 

get_device ()

Getter for the “device” property.

 

get_device_identifier ()

Getter for the “device-identifier” property.

 

get_drivers ()

Getter for the “drivers” property.

 

get_equipment_identifier ()

Getter for the “equipment-identifier” property.

 

get_hardware_revision ()

Getter for the “hardware-revision” property.

 

get_manufacturer ()

Getter for the “manufacturer” property.

 

get_max_active_bearers ()

Getter for the “max-active-bearers” property.

 

get_max_bearers ()

Getter for the “max-bearers” property.

 

get_model ()

Getter for the “model” property.

 

get_own_numbers ()

Getter for the “own-numbers” property.

 

get_plugin ()

Getter for the “plugin” property.

 

get_ports ()

Getter for the “ports” property.

 

get_power_state ()

Getter for the “power-state” property.

 

get_primary_port ()

Getter for the “primary-port” property.

 

get_revision ()

Getter for the “revision” property.

 

get_signal_quality ()

Getter for the “signal-quality” property.

 

get_sim ()

Getter for the “sim” property.

 

get_state ()

Getter for the “state” property.

 

get_state_failed_reason ()

Getter for the “state-failed-reason” property.

 

get_supported_bands ()

Getter for the “supported-bands” property.

 

get_supported_capabilities ()

Getter for the “supported-capabilities” property.

 

get_supported_ip_families ()

Getter for the “supported-ip-families” property.

 

get_supported_modes ()

Getter for the “supported-modes” property.

 

get_unlock_required ()

Getter for the “unlock-required” property.

 

get_unlock_retries ()

Getter for the “unlock-retries” property.

 

state_changed ()

Handler for the “state-changed” signal.

 

Property Details

The “access-technologies” property

  “access-technologies”      guint

Represents the D-Bus property "AccessTechnologies".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0


The “bearers” property

  “bearers”                  GStrv

Represents the D-Bus property "Bearers".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write


The “current-bands” property

  “current-bands”            GVariant *

Represents the D-Bus property "CurrentBands".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<au>

Default value: NULL


The “current-capabilities” property

  “current-capabilities”     guint

Represents the D-Bus property "CurrentCapabilities".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0


The “current-modes” property

  “current-modes”            GVariant *

Represents the D-Bus property "CurrentModes".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<(uu)>

Default value: NULL


The “device” property

  “device”                   gchar *

Represents the D-Bus property "Device".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL


The “device-identifier” property

  “device-identifier”        gchar *

Represents the D-Bus property "DeviceIdentifier".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL


The “drivers” property

  “drivers”                  GStrv

Represents the D-Bus property "Drivers".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write


The “equipment-identifier” property

  “equipment-identifier”     gchar *

Represents the D-Bus property "EquipmentIdentifier".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL


The “hardware-revision” property

  “hardware-revision”        gchar *

Represents the D-Bus property "HardwareRevision".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL


The “manufacturer” property

  “manufacturer”             gchar *

Represents the D-Bus property "Manufacturer".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL


The “max-active-bearers” property

  “max-active-bearers”       guint

Represents the D-Bus property "MaxActiveBearers".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0


The “max-bearers” property

  “max-bearers”              guint

Represents the D-Bus property "MaxBearers".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0


The “model” property

  “model”                    gchar *

Represents the D-Bus property "Model".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL


The “own-numbers” property

  “own-numbers”              GStrv

Represents the D-Bus property "OwnNumbers".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write


The “plugin” property

  “plugin”                   gchar *

Represents the D-Bus property "Plugin".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL


The “ports” property

  “ports”                    GVariant *

Represents the D-Bus property "Ports".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<a(su)>

Default value: NULL


The “power-state” property

  “power-state”              guint

Represents the D-Bus property "PowerState".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0


The “primary-port” property

  “primary-port”             gchar *

Represents the D-Bus property "PrimaryPort".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL


The “revision” property

  “revision”                 gchar *

Represents the D-Bus property "Revision".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL


The “signal-quality” property

  “signal-quality”           GVariant *

Represents the D-Bus property "SignalQuality".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<(ub)>

Default value: NULL


The “sim” property

  “sim”                      gchar *

Represents the D-Bus property "Sim".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL


The “state” property

  “state”                    gint

Represents the D-Bus property "State".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0


The “state-failed-reason” property

  “state-failed-reason”      guint

Represents the D-Bus property "StateFailedReason".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0


The “supported-bands” property

  “supported-bands”          GVariant *

Represents the D-Bus property "SupportedBands".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<au>

Default value: NULL


The “supported-capabilities” property

  “supported-capabilities”   GVariant *

Represents the D-Bus property "SupportedCapabilities".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<au>

Default value: NULL


The “supported-ip-families” property

  “supported-ip-families”    guint

Represents the D-Bus property "SupportedIpFamilies".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0


The “supported-modes” property

  “supported-modes”          GVariant *

Represents the D-Bus property "SupportedModes".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<a(uu)>

Default value: NULL


The “unlock-required” property

  “unlock-required”          guint

Represents the D-Bus property "UnlockRequired".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0


The “unlock-retries” property

  “unlock-retries”           GVariant *

Represents the D-Bus property "UnlockRetries".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<a{uu}>

Default value: NULL

Signal Details

The “handle-command” signal

gboolean
user_function (MmGdbusModem          *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_cmd,
               guint                  arg_timeout,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Command() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_complete_command() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModem.

 

invocation

A GDBusMethodInvocation.

 

arg_cmd

Argument passed by remote caller.

 

arg_timeout

Argument passed by remote caller.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last


The “handle-create-bearer” signal

gboolean
user_function (MmGdbusModem          *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_properties,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the CreateBearer() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_complete_create_bearer() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModem.

 

invocation

A GDBusMethodInvocation.

 

arg_properties

Argument passed by remote caller.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last


The “handle-delete-bearer” signal

gboolean
user_function (MmGdbusModem          *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_bearer,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the DeleteBearer() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_complete_delete_bearer() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModem.

 

invocation

A GDBusMethodInvocation.

 

arg_bearer

Argument passed by remote caller.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last


The “handle-enable” signal

gboolean
user_function (MmGdbusModem          *object,
               GDBusMethodInvocation *invocation,
               gboolean               arg_enable,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Enable() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_complete_enable() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModem.

 

invocation

A GDBusMethodInvocation.

 

arg_enable

Argument passed by remote caller.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last


The “handle-factory-reset” signal

gboolean
user_function (MmGdbusModem          *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_code,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the FactoryReset() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_complete_factory_reset() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModem.

 

invocation

A GDBusMethodInvocation.

 

arg_code

Argument passed by remote caller.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last


The “handle-list-bearers” signal

gboolean
user_function (MmGdbusModem          *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the ListBearers() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_complete_list_bearers() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModem.

 

invocation

A GDBusMethodInvocation.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last


The “handle-reset” signal

gboolean
user_function (MmGdbusModem          *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Reset() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_complete_reset() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModem.

 

invocation

A GDBusMethodInvocation.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last


The “handle-set-current-bands” signal

gboolean
user_function (MmGdbusModem          *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_bands,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SetCurrentBands() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_complete_set_current_bands() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModem.

 

invocation

A GDBusMethodInvocation.

 

arg_bands

Argument passed by remote caller.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last


The “handle-set-current-capabilities” signal

gboolean
user_function (MmGdbusModem          *object,
               GDBusMethodInvocation *invocation,
               guint                  arg_capabilities,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SetCurrentCapabilities() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_complete_set_current_capabilities() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModem.

 

invocation

A GDBusMethodInvocation.

 

arg_capabilities

Argument passed by remote caller.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last


The “handle-set-current-modes” signal

gboolean
user_function (MmGdbusModem          *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_modes,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SetCurrentModes() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_complete_set_current_modes() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModem.

 

invocation

A GDBusMethodInvocation.

 

arg_modes

Argument passed by remote caller.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last


The “handle-set-power-state” signal

gboolean
user_function (MmGdbusModem          *object,
               GDBusMethodInvocation *invocation,
               guint                  arg_state,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SetPowerState() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_complete_set_power_state() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModem.

 

invocation

A GDBusMethodInvocation.

 

arg_state

Argument passed by remote caller.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last


The “state-changed” signal

void
user_function (MmGdbusModem *object,
               gint          arg_old,
               gint          arg_new,
               guint         arg_reason,
               gpointer      user_data)

On the client-side, this signal is emitted whenever the D-Bus signal "StateChanged" is received.

On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.

Parameters

object

A MmGdbusModem.

 

arg_old

Argument.

 

arg_new

Argument.

 

arg_reason

Argument.

 

user_data

user data set when the signal handler was connected.

 

Flags: Run Last