MmGdbusModem3gpp

MmGdbusModem3gpp — Generated C code for the org.freedesktop.ModemManager1.Modem.Modem3gpp D-Bus interface

Functions

Properties

guint enabled-facility-locks Read / Write
gchar * imei Read / Write
gchar * operator-code Read / Write
gchar * operator-name Read / Write
guint registration-state Read / Write
guint subscription-state Read / Write

Signals

Types and Values

Object Hierarchy

    GInterface
    ╰── MmGdbusModem3gpp

Prerequisites

MmGdbusModem3gpp requires GObject.

Known Implementations

MmGdbusModem3gpp is implemented by MMModem3gpp, MmGdbusModem3gppProxy and MmGdbusModem3gppSkeleton.

Description

This section contains code for working with the org.freedesktop.ModemManager1.Modem.Modem3gpp D-Bus interface in C.

Functions

mm_gdbus_modem3gpp_get_registration_state ()

guint
mm_gdbus_modem3gpp_get_registration_state
                               (MmGdbusModem3gpp *object);

Gets the value of the "RegistrationState" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem3gpp.

 

Returns

The property value.


mm_gdbus_modem3gpp_get_imei ()

const gchar *
mm_gdbus_modem3gpp_get_imei (MmGdbusModem3gpp *object);

Gets the value of the "Imei" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem3gpp_dup_imei() if on another thread.

[skip]

Parameters

object

A MmGdbusModem3gpp.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem3gpp_dup_imei ()

gchar *
mm_gdbus_modem3gpp_dup_imei (MmGdbusModem3gpp *object);

Gets a copy of the "Imei" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem3gpp.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full]


mm_gdbus_modem3gpp_get_operator_code ()

const gchar *
mm_gdbus_modem3gpp_get_operator_code (MmGdbusModem3gpp *object);

Gets the value of the "OperatorCode" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem3gpp_dup_operator_code() if on another thread.

[skip]

Parameters

object

A MmGdbusModem3gpp.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem3gpp_dup_operator_code ()

gchar *
mm_gdbus_modem3gpp_dup_operator_code (MmGdbusModem3gpp *object);

Gets a copy of the "OperatorCode" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem3gpp.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full]


mm_gdbus_modem3gpp_get_operator_name ()

const gchar *
mm_gdbus_modem3gpp_get_operator_name (MmGdbusModem3gpp *object);

Gets the value of the "OperatorName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem3gpp_dup_operator_name() if on another thread.

[skip]

Parameters

object

A MmGdbusModem3gpp.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none]


mm_gdbus_modem3gpp_dup_operator_name ()

gchar *
mm_gdbus_modem3gpp_dup_operator_name (MmGdbusModem3gpp *object);

Gets a copy of the "OperatorName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem3gpp.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full]


mm_gdbus_modem3gpp_get_enabled_facility_locks ()

guint
mm_gdbus_modem3gpp_get_enabled_facility_locks
                               (MmGdbusModem3gpp *object);

Gets the value of the "EnabledFacilityLocks" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem3gpp.

 

Returns

The property value.


mm_gdbus_modem3gpp_get_subscription_state ()

guint
mm_gdbus_modem3gpp_get_subscription_state
                               (MmGdbusModem3gpp *object);

Gets the value of the "SubscriptionState" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A MmGdbusModem3gpp.

 

Returns

The property value.


mm_gdbus_modem3gpp_call_register ()

void
mm_gdbus_modem3gpp_call_register (MmGdbusModem3gpp *proxy,
                                  const gchar *arg_operator_id,
                                  GCancellable *cancellable,
                                  GAsyncReadyCallback callback,
                                  gpointer user_data);

Asynchronously invokes the Register() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem3gpp_call_register_finish() to get the result of the operation.

See mm_gdbus_modem3gpp_call_register_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModem3gppProxy.

 

arg_operator_id

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem3gpp_call_register_finish ()

gboolean
mm_gdbus_modem3gpp_call_register_finish
                               (MmGdbusModem3gpp *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem3gpp_call_register().

Parameters

proxy

A MmGdbusModem3gppProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem3gpp_call_register().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem3gpp_call_register_sync ()

gboolean
mm_gdbus_modem3gpp_call_register_sync (MmGdbusModem3gpp *proxy,
                                       const gchar *arg_operator_id,
                                       GCancellable *cancellable,
                                       GError **error);

Synchronously invokes the Register() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem3gpp_call_register() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModem3gppProxy.

 

arg_operator_id

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem3gpp_call_scan ()

void
mm_gdbus_modem3gpp_call_scan (MmGdbusModem3gpp *proxy,
                              GCancellable *cancellable,
                              GAsyncReadyCallback callback,
                              gpointer user_data);

Asynchronously invokes the Scan() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem3gpp_call_scan_finish() to get the result of the operation.

See mm_gdbus_modem3gpp_call_scan_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A MmGdbusModem3gppProxy.

 

cancellable

A GCancellable or NULL.

[allow-none]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

mm_gdbus_modem3gpp_call_scan_finish ()

gboolean
mm_gdbus_modem3gpp_call_scan_finish (MmGdbusModem3gpp *proxy,
                                     GVariant **out_results,
                                     GAsyncResult *res,
                                     GError **error);

Finishes an operation started with mm_gdbus_modem3gpp_call_scan().

Parameters

proxy

A MmGdbusModem3gppProxy.

 

out_results

Return location for return parameter or NULL to ignore.

[out]

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem3gpp_call_scan().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]


mm_gdbus_modem3gpp_call_scan_sync ()

gboolean
mm_gdbus_modem3gpp_call_scan_sync (MmGdbusModem3gpp *proxy,
                                   GVariant **out_results,
                                   GCancellable *cancellable,
                                   GError **error);

Synchronously invokes the Scan() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem3gpp_call_scan() for the asynchronous version of this method.

Parameters

proxy

A MmGdbusModem3gppProxy.

 

out_results

Return location for return parameter or NULL to ignore.

[out]

cancellable

A GCancellable or NULL.

[allow-none]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeded, FALSE if error is set.

[skip]

Types and Values

MmGdbusModem3gpp

typedef struct _MmGdbusModem3gpp MmGdbusModem3gpp;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.Modem3gpp.


struct MmGdbusModem3gppIface

struct MmGdbusModem3gppIface {
  GTypeInterface parent_iface;


  gboolean (*handle_register) (
    MmGdbusModem3gpp *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_operator_id);

  gboolean (*handle_scan) (
    MmGdbusModem3gpp *object,
    GDBusMethodInvocation *invocation);

  guint  (*get_enabled_facility_locks) (MmGdbusModem3gpp *object);

  const gchar * (*get_imei) (MmGdbusModem3gpp *object);

  const gchar * (*get_operator_code) (MmGdbusModem3gpp *object);

  const gchar * (*get_operator_name) (MmGdbusModem3gpp *object);

  guint  (*get_registration_state) (MmGdbusModem3gpp *object);

  guint  (*get_subscription_state) (MmGdbusModem3gpp *object);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.Modem3gpp.

Members

GTypeInterface parent_iface;

The parent interface.

 

handle_register ()

Handler for the “handle-register” signal.

 

handle_scan ()

Handler for the “handle-scan” signal.

 

get_enabled_facility_locks ()

Getter for the “enabled-facility-locks” property.

 

get_imei ()

Getter for the “imei” property.

 

get_operator_code ()

Getter for the “operator-code” property.

 

get_operator_name ()

Getter for the “operator-name” property.

 

get_registration_state ()

Getter for the “registration-state” property.

 

get_subscription_state ()

Getter for the “subscription-state” property.

 

Property Details

The “enabled-facility-locks” property

  “enabled-facility-locks”   guint

Represents the D-Bus property "EnabledFacilityLocks".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0


The “imei” property

  “imei”                     gchar *

Represents the D-Bus property "Imei".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL


The “operator-code” property

  “operator-code”            gchar *

Represents the D-Bus property "OperatorCode".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL


The “operator-name” property

  “operator-name”            gchar *

Represents the D-Bus property "OperatorName".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL


The “registration-state” property

  “registration-state”       guint

Represents the D-Bus property "RegistrationState".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0


The “subscription-state” property

  “subscription-state”       guint

Represents the D-Bus property "SubscriptionState".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0

Signal Details

The “handle-register” signal

gboolean
user_function (MmGdbusModem3gpp      *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_operator_id,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Register() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem3gpp_complete_register() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModem3gpp.

 

invocation

A GDBusMethodInvocation.

 

arg_operator_id

Argument passed by remote caller.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last


The “handle-scan” signal

gboolean
user_function (MmGdbusModem3gpp      *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Scan() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem3gpp_complete_scan() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A MmGdbusModem3gpp.

 

invocation

A GDBusMethodInvocation.

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the invocation was handled, FALSE to let other signal handlers run.

Flags: Run Last