MmGdbusSim

typedef struct _MmGdbusSim MmGdbusSim;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Sim.

struct MmGdbusSimIface

struct MmGdbusSimIface {
  GTypeInterface parent_iface;


  gboolean (*handle_change_pin) (
    MmGdbusSim *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_old_pin,
    const gchar *arg_new_pin);

  gboolean (*handle_enable_pin) (
    MmGdbusSim *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_pin,
    gboolean arg_enabled);

  gboolean (*handle_send_pin) (
    MmGdbusSim *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_pin);

  gboolean (*handle_send_puk) (
    MmGdbusSim *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_puk,
    const gchar *arg_pin);

  const gchar * (*get_imsi) (MmGdbusSim *object);

  const gchar * (*get_operator_identifier) (MmGdbusSim *object);

  const gchar * (*get_operator_name) (MmGdbusSim *object);

  const gchar * (*get_sim_identifier) (MmGdbusSim *object);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Sim.

mm_gdbus_sim_get_imsi ()

const gchar *       mm_gdbus_sim_get_imsi               (MmGdbusSim *object);

Gets the value of the "Imsi" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_sim_dup_imsi ()

gchar *             mm_gdbus_sim_dup_imsi               (MmGdbusSim *object);

Gets a copy of the "Imsi" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_sim_get_sim_identifier ()

const gchar *       mm_gdbus_sim_get_sim_identifier     (MmGdbusSim *object);

Gets the value of the "SimIdentifier" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_sim_dup_sim_identifier ()

gchar *             mm_gdbus_sim_dup_sim_identifier     (MmGdbusSim *object);

Gets a copy of the "SimIdentifier" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_sim_get_operator_identifier ()

const gchar *       mm_gdbus_sim_get_operator_identifier
                                                        (MmGdbusSim *object);

Gets the value of the "OperatorIdentifier" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_sim_dup_operator_identifier ()

gchar *             mm_gdbus_sim_dup_operator_identifier
                                                        (MmGdbusSim *object);

Gets a copy of the "OperatorIdentifier" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_sim_get_operator_name ()

const gchar *       mm_gdbus_sim_get_operator_name      (MmGdbusSim *object);

Gets the value of the "OperatorName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_sim_dup_operator_name ()

gchar *             mm_gdbus_sim_dup_operator_name      (MmGdbusSim *object);

Gets a copy of the "OperatorName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_sim_call_send_pin ()

void                mm_gdbus_sim_call_send_pin          (MmGdbusSim *proxy,
                                                         const gchar *arg_pin,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Asynchronously invokes the SendPin() D-Bus method on proxy. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_sim_call_send_pin_finish() to get the result of the operation.

See mm_gdbus_sim_call_send_pin_sync() for the synchronous, blocking version of this method.

mm_gdbus_sim_call_send_pin_finish ()

gboolean            mm_gdbus_sim_call_send_pin_finish   (MmGdbusSim *proxy,
                                                         GAsyncResult *res,
                                                         GError **error);

Finishes an operation started with mm_gdbus_sim_call_send_pin().

mm_gdbus_sim_call_send_pin_sync ()

gboolean            mm_gdbus_sim_call_send_pin_sync     (MmGdbusSim *proxy,
                                                         const gchar *arg_pin,
                                                         GCancellable *cancellable,
                                                         GError **error);

Synchronously invokes the SendPin() D-Bus method on proxy. The calling thread is blocked until a reply is received.

See mm_gdbus_sim_call_send_pin() for the asynchronous version of this method.

mm_gdbus_sim_call_send_puk ()

void                mm_gdbus_sim_call_send_puk          (MmGdbusSim *proxy,
                                                         const gchar *arg_puk,
                                                         const gchar *arg_pin,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Asynchronously invokes the SendPuk() D-Bus method on proxy. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_sim_call_send_puk_finish() to get the result of the operation.

See mm_gdbus_sim_call_send_puk_sync() for the synchronous, blocking version of this method.

mm_gdbus_sim_call_send_puk_finish ()

gboolean            mm_gdbus_sim_call_send_puk_finish   (MmGdbusSim *proxy,
                                                         GAsyncResult *res,
                                                         GError **error);

Finishes an operation started with mm_gdbus_sim_call_send_puk().

mm_gdbus_sim_call_send_puk_sync ()

gboolean            mm_gdbus_sim_call_send_puk_sync     (MmGdbusSim *proxy,
                                                         const gchar *arg_puk,
                                                         const gchar *arg_pin,
                                                         GCancellable *cancellable,
                                                         GError **error);

Synchronously invokes the SendPuk() D-Bus method on proxy. The calling thread is blocked until a reply is received.

See mm_gdbus_sim_call_send_puk() for the asynchronous version of this method.

mm_gdbus_sim_call_enable_pin ()

void                mm_gdbus_sim_call_enable_pin        (MmGdbusSim *proxy,
                                                         const gchar *arg_pin,
                                                         gboolean arg_enabled,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Asynchronously invokes the EnablePin() D-Bus method on proxy. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_sim_call_enable_pin_finish() to get the result of the operation.

See mm_gdbus_sim_call_enable_pin_sync() for the synchronous, blocking version of this method.

mm_gdbus_sim_call_enable_pin_finish ()

gboolean            mm_gdbus_sim_call_enable_pin_finish (MmGdbusSim *proxy,
                                                         GAsyncResult *res,
                                                         GError **error);

Finishes an operation started with mm_gdbus_sim_call_enable_pin().

mm_gdbus_sim_call_enable_pin_sync ()

gboolean            mm_gdbus_sim_call_enable_pin_sync   (MmGdbusSim *proxy,
                                                         const gchar *arg_pin,
                                                         gboolean arg_enabled,
                                                         GCancellable *cancellable,
                                                         GError **error);

Synchronously invokes the EnablePin() D-Bus method on proxy. The calling thread is blocked until a reply is received.

See mm_gdbus_sim_call_enable_pin() for the asynchronous version of this method.

mm_gdbus_sim_call_change_pin ()

void                mm_gdbus_sim_call_change_pin        (MmGdbusSim *proxy,
                                                         const gchar *arg_old_pin,
                                                         const gchar *arg_new_pin,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Asynchronously invokes the ChangePin() D-Bus method on proxy. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_sim_call_change_pin_finish() to get the result of the operation.

See mm_gdbus_sim_call_change_pin_sync() for the synchronous, blocking version of this method.

mm_gdbus_sim_call_change_pin_finish ()

gboolean            mm_gdbus_sim_call_change_pin_finish (MmGdbusSim *proxy,
                                                         GAsyncResult *res,
                                                         GError **error);

Finishes an operation started with mm_gdbus_sim_call_change_pin().

mm_gdbus_sim_call_change_pin_sync ()

gboolean            mm_gdbus_sim_call_change_pin_sync   (MmGdbusSim *proxy,
                                                         const gchar *arg_old_pin,
                                                         const gchar *arg_new_pin,
                                                         GCancellable *cancellable,
                                                         GError **error);

Synchronously invokes the ChangePin() D-Bus method on proxy. The calling thread is blocked until a reply is received.

See mm_gdbus_sim_call_change_pin() for the asynchronous version of this method.

The "imsi" property

  "imsi"                     gchar*                : Read / Write

Represents the D-Bus property "Imsi".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: NULL

The "operator-identifier" property

  "operator-identifier"      gchar*                : Read / Write

Represents the D-Bus property "OperatorIdentifier".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: NULL

The "operator-name" property

  "operator-name"            gchar*                : Read / Write

Represents the D-Bus property "OperatorName".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: NULL

The "sim-identifier" property

  "sim-identifier"           gchar*                : Read / Write

Represents the D-Bus property "SimIdentifier".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: NULL

The "handle-change-pin" signal

gboolean            user_function                      (MmGdbusSim            *object,
                                                        GDBusMethodInvocation *invocation,
                                                        gchar                 *arg_old_pin,
                                                        gchar                 *arg_new_pin,
                                                        gpointer               user_data)        : Run Last

Signal emitted when a remote caller is invoking the ChangePin() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_sim_complete_change_pin() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

The "handle-enable-pin" signal

gboolean            user_function                      (MmGdbusSim            *object,
                                                        GDBusMethodInvocation *invocation,
                                                        gchar                 *arg_pin,
                                                        gboolean               arg_enabled,
                                                        gpointer               user_data)        : Run Last

Signal emitted when a remote caller is invoking the EnablePin() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_sim_complete_enable_pin() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

The "handle-send-pin" signal

gboolean            user_function                      (MmGdbusSim            *object,
                                                        GDBusMethodInvocation *invocation,
                                                        gchar                 *arg_pin,
                                                        gpointer               user_data)       : Run Last

Signal emitted when a remote caller is invoking the SendPin() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_sim_complete_send_pin() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

The "handle-send-puk" signal

gboolean            user_function                      (MmGdbusSim            *object,
                                                        GDBusMethodInvocation *invocation,
                                                        gchar                 *arg_puk,
                                                        gchar                 *arg_pin,
                                                        gpointer               user_data)       : Run Last

Signal emitted when a remote caller is invoking the SendPuk() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_sim_complete_send_puk() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.