mm_gdbus_modem_voice_get_calls ()

const gchar *const *
mm_gdbus_modem_voice_get_calls (MmGdbusModemVoice *object);

Gets the value of the "Calls" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_voice_dup_calls() if on another thread.

[skip]

mm_gdbus_modem_voice_dup_calls ()

gchar **
mm_gdbus_modem_voice_dup_calls (MmGdbusModemVoice *object);

Gets a copy of the "Calls" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_voice_get_emergency_only ()

gboolean
mm_gdbus_modem_voice_get_emergency_only
                               (MmGdbusModemVoice *object);

Gets the value of the "EmergencyOnly" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_voice_call_create_call ()

void
mm_gdbus_modem_voice_call_create_call (MmGdbusModemVoice *proxy,
                                       GVariant *arg_properties,
                                       GCancellable *cancellable,
                                       GAsyncReadyCallback callback,
                                       gpointer user_data);

Asynchronously invokes the CreateCall() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_voice_call_create_call_finish() to get the result of the operation.

See mm_gdbus_modem_voice_call_create_call_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_voice_call_create_call_finish ()

gboolean
mm_gdbus_modem_voice_call_create_call_finish
                               (MmGdbusModemVoice *proxy,
                                gchar **out_path,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_voice_call_create_call().

mm_gdbus_modem_voice_call_create_call_sync ()

gboolean
mm_gdbus_modem_voice_call_create_call_sync
                               (MmGdbusModemVoice *proxy,
                                GVariant *arg_properties,
                                gchar **out_path,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the CreateCall() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_voice_call_create_call() for the asynchronous version of this method.

mm_gdbus_modem_voice_call_delete_call ()

void
mm_gdbus_modem_voice_call_delete_call (MmGdbusModemVoice *proxy,
                                       const gchar *arg_path,
                                       GCancellable *cancellable,
                                       GAsyncReadyCallback callback,
                                       gpointer user_data);

Asynchronously invokes the DeleteCall() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_voice_call_delete_call_finish() to get the result of the operation.

See mm_gdbus_modem_voice_call_delete_call_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_voice_call_delete_call_finish ()

gboolean
mm_gdbus_modem_voice_call_delete_call_finish
                               (MmGdbusModemVoice *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_voice_call_delete_call().

mm_gdbus_modem_voice_call_delete_call_sync ()

gboolean
mm_gdbus_modem_voice_call_delete_call_sync
                               (MmGdbusModemVoice *proxy,
                                const gchar *arg_path,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the DeleteCall() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_voice_call_delete_call() for the asynchronous version of this method.

mm_gdbus_modem_voice_call_list_calls ()

void
mm_gdbus_modem_voice_call_list_calls (MmGdbusModemVoice *proxy,
                                      GCancellable *cancellable,
                                      GAsyncReadyCallback callback,
                                      gpointer user_data);

Asynchronously invokes the ListCalls() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_voice_call_list_calls_finish() to get the result of the operation.

See mm_gdbus_modem_voice_call_list_calls_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_voice_call_list_calls_finish ()

gboolean
mm_gdbus_modem_voice_call_list_calls_finish
                               (MmGdbusModemVoice *proxy,
                                gchar ***out_result,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_voice_call_list_calls().

mm_gdbus_modem_voice_call_list_calls_sync ()

gboolean
mm_gdbus_modem_voice_call_list_calls_sync
                               (MmGdbusModemVoice *proxy,
                                gchar ***out_result,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the ListCalls() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_voice_call_list_calls() for the asynchronous version of this method.

mm_gdbus_modem_voice_call_hangup_and_accept ()

void
mm_gdbus_modem_voice_call_hangup_and_accept
                               (MmGdbusModemVoice *proxy,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the HangupAndAccept() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_voice_call_hangup_and_accept_finish() to get the result of the operation.

See mm_gdbus_modem_voice_call_hangup_and_accept_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_voice_call_hangup_and_accept_finish ()

gboolean
mm_gdbus_modem_voice_call_hangup_and_accept_finish
                               (MmGdbusModemVoice *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_voice_call_hangup_and_accept().

mm_gdbus_modem_voice_call_hangup_and_accept_sync ()

gboolean
mm_gdbus_modem_voice_call_hangup_and_accept_sync
                               (MmGdbusModemVoice *proxy,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the HangupAndAccept() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_voice_call_hangup_and_accept() for the asynchronous version of this method.

mm_gdbus_modem_voice_call_hold_and_accept ()

void
mm_gdbus_modem_voice_call_hold_and_accept
                               (MmGdbusModemVoice *proxy,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the HoldAndAccept() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_voice_call_hold_and_accept_finish() to get the result of the operation.

See mm_gdbus_modem_voice_call_hold_and_accept_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_voice_call_hold_and_accept_finish ()

gboolean
mm_gdbus_modem_voice_call_hold_and_accept_finish
                               (MmGdbusModemVoice *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_voice_call_hold_and_accept().

mm_gdbus_modem_voice_call_hold_and_accept_sync ()

gboolean
mm_gdbus_modem_voice_call_hold_and_accept_sync
                               (MmGdbusModemVoice *proxy,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the HoldAndAccept() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_voice_call_hold_and_accept() for the asynchronous version of this method.

mm_gdbus_modem_voice_call_hangup_all ()

void
mm_gdbus_modem_voice_call_hangup_all (MmGdbusModemVoice *proxy,
                                      GCancellable *cancellable,
                                      GAsyncReadyCallback callback,
                                      gpointer user_data);

Asynchronously invokes the HangupAll() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_voice_call_hangup_all_finish() to get the result of the operation.

See mm_gdbus_modem_voice_call_hangup_all_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_voice_call_hangup_all_finish ()

gboolean
mm_gdbus_modem_voice_call_hangup_all_finish
                               (MmGdbusModemVoice *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_voice_call_hangup_all().

mm_gdbus_modem_voice_call_hangup_all_sync ()

gboolean
mm_gdbus_modem_voice_call_hangup_all_sync
                               (MmGdbusModemVoice *proxy,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the HangupAll() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_voice_call_hangup_all() for the asynchronous version of this method.

mm_gdbus_modem_voice_call_transfer ()

void
mm_gdbus_modem_voice_call_transfer (MmGdbusModemVoice *proxy,
                                    GCancellable *cancellable,
                                    GAsyncReadyCallback callback,
                                    gpointer user_data);

Asynchronously invokes the Transfer() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_voice_call_transfer_finish() to get the result of the operation.

See mm_gdbus_modem_voice_call_transfer_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_voice_call_transfer_finish ()

gboolean
mm_gdbus_modem_voice_call_transfer_finish
                               (MmGdbusModemVoice *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_voice_call_transfer().

mm_gdbus_modem_voice_call_transfer_sync ()

gboolean
mm_gdbus_modem_voice_call_transfer_sync
                               (MmGdbusModemVoice *proxy,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Transfer() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_voice_call_transfer() for the asynchronous version of this method.

mm_gdbus_modem_voice_call_call_waiting_query ()

void
mm_gdbus_modem_voice_call_call_waiting_query
                               (MmGdbusModemVoice *proxy,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the CallWaitingQuery() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_voice_call_call_waiting_query_finish() to get the result of the operation.

See mm_gdbus_modem_voice_call_call_waiting_query_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_voice_call_call_waiting_query_finish ()

gboolean
mm_gdbus_modem_voice_call_call_waiting_query_finish
                               (MmGdbusModemVoice *proxy,
                                gboolean *out_status,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_voice_call_call_waiting_query().

mm_gdbus_modem_voice_call_call_waiting_query_sync ()

gboolean
mm_gdbus_modem_voice_call_call_waiting_query_sync
                               (MmGdbusModemVoice *proxy,
                                gboolean *out_status,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the CallWaitingQuery() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_voice_call_call_waiting_query() for the asynchronous version of this method.

mm_gdbus_modem_voice_call_call_waiting_setup ()

void
mm_gdbus_modem_voice_call_call_waiting_setup
                               (MmGdbusModemVoice *proxy,
                                gboolean arg_enable,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the CallWaitingSetup() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_voice_call_call_waiting_setup_finish() to get the result of the operation.

See mm_gdbus_modem_voice_call_call_waiting_setup_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_voice_call_call_waiting_setup_finish ()

gboolean
mm_gdbus_modem_voice_call_call_waiting_setup_finish
                               (MmGdbusModemVoice *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_voice_call_call_waiting_setup().

mm_gdbus_modem_voice_call_call_waiting_setup_sync ()

gboolean
mm_gdbus_modem_voice_call_call_waiting_setup_sync
                               (MmGdbusModemVoice *proxy,
                                gboolean arg_enable,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the CallWaitingSetup() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_voice_call_call_waiting_setup() for the asynchronous version of this method.

MmGdbusModemVoice

typedef struct _MmGdbusModemVoice MmGdbusModemVoice;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.Voice.

struct MmGdbusModemVoiceIface

struct MmGdbusModemVoiceIface {
  GTypeInterface parent_iface;

  gboolean (*handle_call_waiting_query) (
    MmGdbusModemVoice *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_call_waiting_setup) (
    MmGdbusModemVoice *object,
    GDBusMethodInvocation *invocation,
    gboolean arg_enable);

  gboolean (*handle_create_call) (
    MmGdbusModemVoice *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_properties);

  gboolean (*handle_delete_call) (
    MmGdbusModemVoice *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_path);

  gboolean (*handle_hangup_all) (
    MmGdbusModemVoice *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_hangup_and_accept) (
    MmGdbusModemVoice *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_hold_and_accept) (
    MmGdbusModemVoice *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_list_calls) (
    MmGdbusModemVoice *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_transfer) (
    MmGdbusModemVoice *object,
    GDBusMethodInvocation *invocation);

  const gchar *const * (*get_calls) (MmGdbusModemVoice *object);

  gboolean  (*get_emergency_only) (MmGdbusModemVoice *object);

  void (*call_added) (
    MmGdbusModemVoice *object,
    const gchar *arg_path);

  void (*call_deleted) (
    MmGdbusModemVoice *object,
    const gchar *arg_path);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.Voice.

The “calls” property

  “calls”                    GStrv

Represents the D-Bus property "Calls".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemVoice

Flags: Read / Write

The “emergency-only” property

  “emergency-only”           gboolean

Represents the D-Bus property "EmergencyOnly".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemVoice

Flags: Read / Write

Default value: FALSE

The “call-added” signal

void
user_function (MmGdbusModemVoice *object,
               char              *arg_path,
               gpointer           user_data)

On the client-side, this signal is emitted whenever the D-Bus signal "CallAdded" is received.

On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.

Flags: Run Last

The “call-deleted” signal

void
user_function (MmGdbusModemVoice *object,
               char              *arg_path,
               gpointer           user_data)

On the client-side, this signal is emitted whenever the D-Bus signal "CallDeleted" is received.

On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.

Flags: Run Last

The “handle-call-waiting-query” signal

gboolean
user_function (MmGdbusModemVoice     *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the CallWaitingQuery() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_voice_complete_call_waiting_query() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-call-waiting-setup” signal

gboolean
user_function (MmGdbusModemVoice     *object,
               GDBusMethodInvocation *invocation,
               gboolean               arg_enable,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the CallWaitingSetup() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_voice_complete_call_waiting_setup() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-create-call” signal

gboolean
user_function (MmGdbusModemVoice     *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_properties,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the CreateCall() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_voice_complete_create_call() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-delete-call” signal

gboolean
user_function (MmGdbusModemVoice     *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_path,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the DeleteCall() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_voice_complete_delete_call() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-hangup-all” signal

gboolean
user_function (MmGdbusModemVoice     *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the HangupAll() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_voice_complete_hangup_all() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-hangup-and-accept” signal

gboolean
user_function (MmGdbusModemVoice     *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the HangupAndAccept() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_voice_complete_hangup_and_accept() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-hold-and-accept” signal

gboolean
user_function (MmGdbusModemVoice     *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the HoldAndAccept() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_voice_complete_hold_and_accept() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-list-calls” signal

gboolean
user_function (MmGdbusModemVoice     *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the ListCalls() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_voice_complete_list_calls() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-transfer” signal

gboolean
user_function (MmGdbusModemVoice     *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Transfer() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_voice_complete_transfer() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last