MmGdbusModemSimple

MmGdbusModemSimple — Generated C code for the org.freedesktop.ModemManager1.Modem.Simple D-Bus interface

Synopsis

                    MmGdbusModemSimple;
struct              MmGdbusModemSimpleIface;

void                mm_gdbus_modem_simple_call_connect  (MmGdbusModemSimple *proxy,
                                                         GVariant *arg_properties,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);
gboolean            mm_gdbus_modem_simple_call_connect_finish
                                                        (MmGdbusModemSimple *proxy,
                                                         gchar **out_bearer,
                                                         GAsyncResult *res,
                                                         GError **error);
gboolean            mm_gdbus_modem_simple_call_connect_sync
                                                        (MmGdbusModemSimple *proxy,
                                                         GVariant *arg_properties,
                                                         gchar **out_bearer,
                                                         GCancellable *cancellable,
                                                         GError **error);
void                mm_gdbus_modem_simple_call_disconnect
                                                        (MmGdbusModemSimple *proxy,
                                                         const gchar *arg_bearer,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);
gboolean            mm_gdbus_modem_simple_call_disconnect_finish
                                                        (MmGdbusModemSimple *proxy,
                                                         GAsyncResult *res,
                                                         GError **error);
gboolean            mm_gdbus_modem_simple_call_disconnect_sync
                                                        (MmGdbusModemSimple *proxy,
                                                         const gchar *arg_bearer,
                                                         GCancellable *cancellable,
                                                         GError **error);
void                mm_gdbus_modem_simple_call_get_status
                                                        (MmGdbusModemSimple *proxy,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);
gboolean            mm_gdbus_modem_simple_call_get_status_finish
                                                        (MmGdbusModemSimple *proxy,
                                                         GVariant **out_properties,
                                                         GAsyncResult *res,
                                                         GError **error);
gboolean            mm_gdbus_modem_simple_call_get_status_sync
                                                        (MmGdbusModemSimple *proxy,
                                                         GVariant **out_properties,
                                                         GCancellable *cancellable,
                                                         GError **error);

Object Hierarchy

  GInterface
   +----MmGdbusModemSimple

Prerequisites

MmGdbusModemSimple requires GObject.

Known Implementations

MmGdbusModemSimple is implemented by MMModemSimple, MmGdbusModemSimpleProxy and MmGdbusModemSimpleSkeleton.

Signals

  "handle-connect"                                 : Run Last
  "handle-disconnect"                              : Run Last
  "handle-get-status"                              : Run Last

Description

This section contains code for working with the org.freedesktop.ModemManager1.Modem.Simple D-Bus interface in C.

Details

MmGdbusModemSimple

typedef struct _MmGdbusModemSimple MmGdbusModemSimple;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.Simple.


struct MmGdbusModemSimpleIface

struct MmGdbusModemSimpleIface {
  GTypeInterface parent_iface;

  gboolean (*handle_connect) (
    MmGdbusModemSimple *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_properties);

  gboolean (*handle_disconnect) (
    MmGdbusModemSimple *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_bearer);

  gboolean (*handle_get_status) (
    MmGdbusModemSimple *object,
    GDBusMethodInvocation *invocation);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.Simple.

GTypeInterface parent_iface;

The parent interface.

handle_connect ()

Handler for the "handle-connect" signal.

handle_disconnect ()

Handler for the "handle-disconnect" signal.

handle_get_status ()

Handler for the "handle-get-status" signal.

mm_gdbus_modem_simple_call_connect ()

void                mm_gdbus_modem_simple_call_connect  (MmGdbusModemSimple *proxy,
                                                         GVariant *arg_properties,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Asynchronously invokes the Connect() D-Bus method on proxy. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_simple_call_connect_finish() to get the result of the operation.

See mm_gdbus_modem_simple_call_connect_sync() for the synchronous, blocking version of this method.

proxy :

A MmGdbusModemSimpleProxy.

arg_properties :

Argument to pass with the method invocation.

cancellable :

A GCancellable or NULL. [allow-none]

callback :

A GAsyncReadyCallback to call when the request is satisfied or NULL.

user_data :

User data to pass to callback.

mm_gdbus_modem_simple_call_connect_finish ()

gboolean            mm_gdbus_modem_simple_call_connect_finish
                                                        (MmGdbusModemSimple *proxy,
                                                         gchar **out_bearer,
                                                         GAsyncResult *res,
                                                         GError **error);

Finishes an operation started with mm_gdbus_modem_simple_call_connect().

proxy :

A MmGdbusModemSimpleProxy.

out_bearer :

Return location for return parameter or NULL to ignore. [out]

res :

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_simple_call_connect().

error :

Return location for error or NULL.

Returns :

TRUE if the call succeded, FALSE if error is set. [skip]

mm_gdbus_modem_simple_call_connect_sync ()

gboolean            mm_gdbus_modem_simple_call_connect_sync
                                                        (MmGdbusModemSimple *proxy,
                                                         GVariant *arg_properties,
                                                         gchar **out_bearer,
                                                         GCancellable *cancellable,
                                                         GError **error);

Synchronously invokes the Connect() D-Bus method on proxy. The calling thread is blocked until a reply is received.

See mm_gdbus_modem_simple_call_connect() for the asynchronous version of this method.

proxy :

A MmGdbusModemSimpleProxy.

arg_properties :

Argument to pass with the method invocation.

out_bearer :

Return location for return parameter or NULL to ignore. [out]

cancellable :

A GCancellable or NULL. [allow-none]

error :

Return location for error or NULL.

Returns :

TRUE if the call succeded, FALSE if error is set. [skip]

mm_gdbus_modem_simple_call_disconnect ()

void                mm_gdbus_modem_simple_call_disconnect
                                                        (MmGdbusModemSimple *proxy,
                                                         const gchar *arg_bearer,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Asynchronously invokes the Disconnect() D-Bus method on proxy. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_simple_call_disconnect_finish() to get the result of the operation.

See mm_gdbus_modem_simple_call_disconnect_sync() for the synchronous, blocking version of this method.

proxy :

A MmGdbusModemSimpleProxy.

arg_bearer :

Argument to pass with the method invocation.

cancellable :

A GCancellable or NULL. [allow-none]

callback :

A GAsyncReadyCallback to call when the request is satisfied or NULL.

user_data :

User data to pass to callback.

mm_gdbus_modem_simple_call_disconnect_finish ()

gboolean            mm_gdbus_modem_simple_call_disconnect_finish
                                                        (MmGdbusModemSimple *proxy,
                                                         GAsyncResult *res,
                                                         GError **error);

Finishes an operation started with mm_gdbus_modem_simple_call_disconnect().

proxy :

A MmGdbusModemSimpleProxy.

res :

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_simple_call_disconnect().

error :

Return location for error or NULL.

Returns :

TRUE if the call succeded, FALSE if error is set. [skip]

mm_gdbus_modem_simple_call_disconnect_sync ()

gboolean            mm_gdbus_modem_simple_call_disconnect_sync
                                                        (MmGdbusModemSimple *proxy,
                                                         const gchar *arg_bearer,
                                                         GCancellable *cancellable,
                                                         GError **error);

Synchronously invokes the Disconnect() D-Bus method on proxy. The calling thread is blocked until a reply is received.

See mm_gdbus_modem_simple_call_disconnect() for the asynchronous version of this method.

proxy :

A MmGdbusModemSimpleProxy.

arg_bearer :

Argument to pass with the method invocation.

cancellable :

A GCancellable or NULL. [allow-none]

error :

Return location for error or NULL.

Returns :

TRUE if the call succeded, FALSE if error is set. [skip]

mm_gdbus_modem_simple_call_get_status ()

void                mm_gdbus_modem_simple_call_get_status
                                                        (MmGdbusModemSimple *proxy,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Asynchronously invokes the GetStatus() D-Bus method on proxy. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_simple_call_get_status_finish() to get the result of the operation.

See mm_gdbus_modem_simple_call_get_status_sync() for the synchronous, blocking version of this method.

proxy :

A MmGdbusModemSimpleProxy.

cancellable :

A GCancellable or NULL. [allow-none]

callback :

A GAsyncReadyCallback to call when the request is satisfied or NULL.

user_data :

User data to pass to callback.

mm_gdbus_modem_simple_call_get_status_finish ()

gboolean            mm_gdbus_modem_simple_call_get_status_finish
                                                        (MmGdbusModemSimple *proxy,
                                                         GVariant **out_properties,
                                                         GAsyncResult *res,
                                                         GError **error);

Finishes an operation started with mm_gdbus_modem_simple_call_get_status().

proxy :

A MmGdbusModemSimpleProxy.

out_properties :

Return location for return parameter or NULL to ignore. [out]

res :

The GAsyncResult obtained from the GAsyncReadyCallback passed to mm_gdbus_modem_simple_call_get_status().

error :

Return location for error or NULL.

Returns :

TRUE if the call succeded, FALSE if error is set. [skip]

mm_gdbus_modem_simple_call_get_status_sync ()

gboolean            mm_gdbus_modem_simple_call_get_status_sync
                                                        (MmGdbusModemSimple *proxy,
                                                         GVariant **out_properties,
                                                         GCancellable *cancellable,
                                                         GError **error);

Synchronously invokes the GetStatus() D-Bus method on proxy. The calling thread is blocked until a reply is received.

See mm_gdbus_modem_simple_call_get_status() for the asynchronous version of this method.

proxy :

A MmGdbusModemSimpleProxy.

out_properties :

Return location for return parameter or NULL to ignore. [out]

cancellable :

A GCancellable or NULL. [allow-none]

error :

Return location for error or NULL.

Returns :

TRUE if the call succeded, FALSE if error is set. [skip]

Signal Details

The "handle-connect" signal

gboolean            user_function                      (MmGdbusModemSimple    *object,
                                                        GDBusMethodInvocation *invocation,
                                                        GVariant              *arg_properties,
                                                        gpointer               user_data)           : Run Last

Signal emitted when a remote caller is invoking the Connect() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_simple_complete_connect() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

object :

A MmGdbusModemSimple.

invocation :

A GDBusMethodInvocation.

arg_properties :

Argument passed by remote caller.

user_data :

user data set when the signal handler was connected.

Returns :

TRUE if the invocation was handled, FALSE to let other signal handlers run.

The "handle-disconnect" signal

gboolean            user_function                      (MmGdbusModemSimple    *object,
                                                        GDBusMethodInvocation *invocation,
                                                        gchar                 *arg_bearer,
                                                        gpointer               user_data)       : Run Last

Signal emitted when a remote caller is invoking the Disconnect() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_simple_complete_disconnect() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

object :

A MmGdbusModemSimple.

invocation :

A GDBusMethodInvocation.

arg_bearer :

Argument passed by remote caller.

user_data :

user data set when the signal handler was connected.

Returns :

TRUE if the invocation was handled, FALSE to let other signal handlers run.

The "handle-get-status" signal

gboolean            user_function                      (MmGdbusModemSimple    *object,
                                                        GDBusMethodInvocation *invocation,
                                                        gpointer               user_data)       : Run Last

Signal emitted when a remote caller is invoking the GetStatus() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_simple_complete_get_status() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

object :

A MmGdbusModemSimple.

invocation :

A GDBusMethodInvocation.

user_data :

user data set when the signal handler was connected.

Returns :

TRUE if the invocation was handled, FALSE to let other signal handlers run.