lt-qmicli [OPTION?] - Control QMI devices
Help Options:
-h, --help
Show help options
--help-all
Show all help options
--help-dms
Show Device Management Service options
--help-nas
Show Network Access Service options
--help-wds
Show Wireless Data Service options
--help-pbm
Show Phonebook Management options
--help-pdc
Show platform device configurations options
--help-uim
Show User Identity Module options
--help-wms
Show Wireless Messaging Service options
--help-wda
Show Wireless Data Administrative options
--help-voice
Show Voice Service options
DMS options
--dms-get-ids
Get IDs
--dms-get-capabilities
Get capabilities
--dms-get-manufacturer
Get manufacturer
--dms-get-model
Get model
--dms-get-revision
Get revision
Unblock PIN
--dms-uim-change-pin=[(PIN|PIN2),(old PIN),(new PIN)]
Change PIN
--dms-uim-get-pin-status
Get PIN status
--dms-uim-get-iccid
Get ICCID
--dms-uim-get-imsi
Get IMSI
--dms-uim-get-state
Get UIM State
--dms-uim-get-ck-status=[(pn|pu|pp|pc|pf)]
Get CK Status
--dms-uim-set-ck-protection=[(pn|pu|pp|pc|pf),(disable),(key)]
Disable CK protection
--dms-uim-unblock-ck=[(pn|pu|pp|pc|pf),(key)]
Unblock CK
--dms-get-hardware-revision
Get the HW revision
--dms-get-operating-mode
Get the device operating mode
--dms-set-operating-mode=[(Operating mode)]
Set the device operating mode
--dms-get-time
Get the device time
--dms-get-prl-version
Get the PRL version
--dms-get-activation-state
Get the state of the service activation
--dms-activate-automatic=[Activation Code]
Request automatic service activation
--dms-activate-manual=[SPC,SID,MDN,MIN]
Request manual service activation
--dms-get-user-lock-state
Get the state of the user lock
Read ERI file
--dms-restore-factory-defaults=[(Service Programming Code)]
Restore factory defaults
--dms-validate-service-programming-code=[(Service Programming Code)]
Validate the Service Programming Code
--dms-set-firmware-id
Set firmware id
--dms-get-band-capabilities
Get band capabilities
--dms-get-factory-sku
Get factory stock keeping unit
--dms-list-stored-images
List stored images
--dms-select-stored-image=[modem#,pri#] where # is the index
Select stored image
--dms-delete-stored-image=[modem#|pri#] where # is the index
Delete stored image
--dms-get-firmware-preference
Get firmware preference
--dms-set-firmware-preference=[(fwver),(config),(carrier)]
Set firmware preference
--dms-get-boot-image-download-mode
Get boot image download mode
--dms-set-boot-image-download-mode=[normal|boot-and-recovery]
Set boot image download mode
--dms-get-software-version
Get software version
--dms-set-fcc-authentication
Set FCC authentication
--dms-get-supported-messages
Get supported messages
--dms-hp-change-device-mode=[fastboot]
Change device mode (HP specific)
--dms-swi-get-current-firmware
Get Current Firmware (Sierra Wireless specific)
--nas-get-signal-strength
Get signal strength
--nas-get-signal-info
Get signal info
--nas-get-tx-rx-info=[(Radio Interface)]
Get TX/RX info
--nas-get-home-network
Get home network
--nas-get-serving-system
Get serving system
--nas-get-system-info
Get system info
--nas-get-technology-preference
Get technology preference
--nas-get-system-selection-preference
Get system selection preference
--nas-set-system-selection-preference=[cdma-1x|cdma-1xevdo|gsm|umts|lte|td-scdma]
Set system selection preference
--nas-network-scan
Scan networks
--nas-get-cell-location-info
Get Cell Location Info
--nas-force-network-search
Force network search
--nas-get-operator-name
Get operator name data
--nas-get-lte-cphy-ca-info
Get LTE Cphy CA Info
--nas-get-rf-band-info
Get RF Band Info
--nas-get-supported-messages
Get supported messages
--nas-reset
Reset the service state
--wds-get-current-settings
Get current settings
--wds-get-packet-service-status
Get packet service status
--wds-get-packet-statistics
Get packet statistics
--wds-get-data-bearer-technology
Get data bearer technology
--wds-get-current-data-bearer-technology
Get current data bearer technology
--wds-go-dormant
Make the active data connection go dormant
--wds-go-active
Make the active data connection go active
--wds-get-dormancy-status
Get the dormancy status of the active data connection
--wds-get-profile-list=[3gpp|3gpp2]
Get profile list
--wds-get-default-settings=[3gpp|3gpp2]
Get default settings
--wds-get-autoconnect-settings
Get autoconnect settings
--wds-set-autoconnect-settings=[(enabled|disabled|paused)[,(roaming-allowed|home-only)]]
Set autoconnect settings (roaming settings optional)
--wds-get-supported-messages
Get supported messages
--wds-reset
Reset the service state
--wds-bind-mux-data-port=["key=value,..."]
Bind qmux data port to controller device (allowed keys: mux-id, ep-iface-number) to be used with `--client-no-release-cid'
--wds-set-ip-family=[4|6]
Set IP family
--wds-get-channel-rates
Get channel data rates
--wds-noop
--pdc-delete-config=[(platform|software),ConfigId]
Delete config
--pdc-activate-config=[(platform|software),ConfigId]
Activate config
--pdc-deactivate-config=[(platform|software),ConfigId]
Deactivate config
--pdc-load-config=[Path to config]
Load config to device
--pdc-noop
Just allocate or release a PDC client. Use with `--client-no-release-cid' and/or `--client-cid'
UIM options
--uim-set-pin-protection=[(PIN1|PIN2|UPIN),(disable|enable),(current PIN)]
Set PIN protection
--uim-verify-pin=[(PIN1|PIN2|UPIN),(current PIN)]
Verify PIN
--uim-unblock-pin=[(PIN1|PIN2|UPIN),(PUK),(new PIN)]
Unblock PIN
--uim-change-pin=[(PIN1|PIN2|UPIN),(old PIN),(new PIN)]
Change PIN
--uim-read-transparent=[0xNNNN,0xNNNN,...]
Read a transparent file given the file path
--uim-get-file-attributes=[0xNNNN,0xNNNN,...]
Get the attributes of a given file
--uim-read-record=["key=value,..."]
Read a record from given file (allowed keys: record-number, record-length, file ([0xNNNN-0xNNNN,...])
--uim-get-card-status
Get card status
--uim-get-supported-messages
Get supported messages
--uim-sim-power-on=[(slot number)]
Power on SIM card
--uim-sim-power-off=[(slot number)]
Power off SIM card
--uim-reset
Just allocate or release a WMS client. Use with `--client-no-release-cid' and/or `--client-cid'
WDA options
--wda-set-data-format=["key=value,..."]
Set data format (allowed keys: link-layer-protocol (802-3|raw-ip), ul-protocol (tlp|qc-ncm|mbim|rndis|qmap), dl-protocol (tlp|qc-ncm|mbim|rndis|qmap),
dl-datagrams-max-size, dl-max-datagrams, ep-type (undefined|hsusb), ep-iface-number)
--wda-get-data-format
Get data format
--wda-get-supported-messages
Get supported messages
--wda-noop
Just allocate or release a WDA client. Use with `--client-no-release-cid' and/or `--client-cid'
VOICE options
--voice-get-config
Get Voice service configuration
--voice-get-supported-messages
Get supported messages
--voice-noop
Just allocate or release a VOICE client. Use with `--client-no-release-cid' and/or `--client-cid'
Application Options:
-d, --device=[PATH]
Specify device path
-w, --get-wwan-iface
Get the WWAN iface name associated with this control port
-e, --get-expected-data-format
Get the expected data format in the WWAN iface
-E, --set-expected-data-format=[802-3|raw-ip]
Set the expected data format in the WWAN iface
--get-service-version-info
Get service version info
--device-set-instance-id=[Instance ID]
Set instance ID
--device-open-version-info
Run version info check when opening device
--device-open-sync
Run sync operation when opening device
Open device with specific link protocol and QoS flags
--client-cid=[CID]
Use the given CID, don't allocate a new one
--client-no-release-cid
Do not release the CID when exiting
-v, --verbose
Run action with verbose logs, including the debug ones
--silent
Run action with no logs; not even the error/warning ones
-V, --version
Print version
qmicli 1.20.0 Copyright © 2012-2018 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html> This is free software:
you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.
SEE ALSO
The full documentation for qmicli is maintained as a Texinfo manual. If the info and qmicli programs are properly installed at your site, the command
info qmicli
should give you access to the complete manual.
qmicli January 2018 QMICLI(1)
Man(1) output converted with
man2html